|
Parthnerim Kafası Karıyor Yardım Lütfen |
Yanıt Yaz |
Yazar | |
grafiozo
1. Vites Yaşı : 46 Aracı : Parthner Kayıt Tarihi: 19 Ağustos 2014 Konum: edremit Durum: Aktif Değil Mesajlar: 4 |
Mesaj Seçenekleri
Teşekkür(0)
Gönderim Zamanı: 19 Ağustos 2014 Saat 19:28 |
|
GökhaN
YÖNETİCİ KURUCU / ID=1 Yaşı : 37 Aracı : 3008 Auto6R 1.6 HDi Kayıt Tarihi: 18 Mart 2008 Konum: Gaziosmanpaşa Durum: Aktif Değil Mesajlar: 11671 |
Mesaj Seçenekleri
Teşekkür(0)
|
akünün amperinden böyle bir sorun olmazda başka birşey olmalı sinyal kolları vs diğer şeylerde çalışmadığı için bütün problem bsiden diye düşünüyorum.
|
|
grafiozo
1. Vites Yaşı : 46 Aracı : Parthner Kayıt Tarihi: 19 Ağustos 2014 Konum: edremit Durum: Aktif Değil Mesajlar: 4 |
Mesaj Seçenekleri
Teşekkür(0)
|
Evet bende öyle düşünüyorum ancak artı kutup başı söküldüğünde herşeyin düzelmesi bsi de sorun olmadığı kanısına varıyoruz. Zira sorun olsa söküp takma ile düzelmemesi lazım. Peki servislerdeki orjinal peugoet programı hatayı bulabilirmi?
|
grafiozo
1. Vites Yaşı : 46 Aracı : Parthner Kayıt Tarihi: 19 Ağustos 2014 Konum: edremit Durum: Aktif Değil Mesajlar: 4 |
Mesaj Seçenekleri
Teşekkür(0)
|
Nette BSI resetleme prosüdürü buldum. Bilgisi olan var mı acaba? Yalnız benim araçta sonradan takma merkezi sistem varmı. Prosüdürde kumandadan kapatma tuşuna 10 sn bas diyor. Birde bu işlemi yaparsak komple beyin bilgileri silinirmi?
Peugeot Citroen cars have a “B S I” (Body Systems Interface) ECU. Follow this procedure for the reset (reboot). Have the drivers window fully open. Open the bonnet and make sure all equipment is switched off including interior light. Close all doors and remove key from the ignition. Wait 3 minutes, disconnect the vehicle battery then wait 15 seconds. Reconnect the vehicle battery and wait a further 10 seconds. Switch on the side lights through the driver’s window. Switch on the ignition DO NOT start the engine at this point. Hold the lock button on the key down for 10 seconds while key is still in the ignition. Switch off ignition and remove key open & close door to test central locking system. Start the engine. |
Yanıt Yaz | |
Forum Atla | Forum İzinleri Kapalı Foruma Yeni Konu Gönderme Kapalı Forumdaki Konulara Cevap Yazma Kapalı Forumda Cevapları Silme Kapalı Forumdaki Cevapları Düzenleme Kapalı Forumda Anket Açma Kapalı Forumda Anketlerde Oy Kullanma |