Peugeot Forums - Peugeot Fan Club

There is something like water in the mat on the driver's side

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 20:22 # 1
mustafa46
Hi;
I own the model model 307 vehicle, I bought my car 3 weeks ago ... my vehicle is technoplus model .. I clean the interior of my car, remove the mop on the sofor side, I get a dampness under the mop, but water was not water.
08.05.2020 20:22 # 2
sonerkyl
My teacher is probably missing out on the heater core orings. related topic


08.05.2020 20:22 # 3
mustafa46
There is no shortage in cooling water, but something like moisture in the mop. mustafa46 2017-05-22 15:29:52
08.05.2020 20:22 # 4
Silverballer21
bro, the heater honeycombs are exploded i.e. there are holes or pipes orling there, he misses it antifreeze is green or red.
08.05.2020 20:22 # 5
doganatak
Well, I was getting my hand touched by the honeycomer. I am afraid to handle it, obviously it is coming from there.
08.05.2020 20:22 # 6
mustafa46
I will take you to the industry on Saturday, I hope it will not cost you more
08.05.2020 20:22 # 7
OguzhanKucuk61
[QUOTE = mustafa46] there is no shortage of cooling water but ... something like moisture oil in the mop
[/ QUOTE]

He's an antifreeze. I also have sweating from the same trouble. It does not decrease from water. They say that if you go to industry, the chest will be removed
08.05.2020 20:22 # 8
direksiyon hocasi
HEAT EXCHANGES FROM KALORİFER PETEK BUTS, BUT GOGUS HAS BEEN CHANGED WITHOUT SOURCES, I HAVE MADE THAT IT HAS PERFECTLY WATER CUTTED LEAK IN THE ANTIFRIZE COST INCLUDED 150 TL CURVE PETEK INCLUDED (IN THE KUTAHY)
08.05.2020 20:22 # 9
ALLEX
[QUOTE = steering instructor]
HEAT EXCHANGES FROM KALORİFER PETEK BUTS, BUT GOGUS HAS BEEN EXCHANGED WITHOUT EXTRACTION.

I agree with your information, however,

It is forbidden to write in big letters as per the forum rules.
I would like you to be more careful about this.
Have a good day.
08.05.2020 20:22 # 10
mustafa46
There was a decrease in cooling water when I looked today in the morning
08.05.2020 20:22 # 11
sonerkyl
[QUOTE = mustafa46] When I look at it today, there is a decrease in cooling water [/ QUOTE]

If you have examined the link given by Mustafa, you can easily do it yourself. If you go to the industry, they want 50-100 TL. Replacing heater core gaskets in 307s is much easier than 206.
08.05.2020 20:22 # 12
mustafa46
I have reviewed the pictures, Saturday, inshaşşalh myself, ugrascam, it looks like it will be in my hand, thank god
08.05.2020 20:22 # 13
sonerkyl
[QUOTE = mustafa46] I have reviewed the pictures Saturday day, inshashhh myself, it looks like a necklace, thank you very much [/ QUOTE]

I think, if you can do it, do not do it yourself, do not get infected with the industry, but you will have to set an oring.
08.05.2020 20:22 # 14
mustafa46
Do I have to buy oring industry?
08.05.2020 20:22 # 15
sonerkyl
[QUOTE = mustafa46] Do I have to buy oring industry [/ QUOTE]

go to oring with the hardware stores. you need to go to industry
08.05.2020 20:22 # 16
mustafa46
it has nothing to do with the subject, but let me ask one more question. Is there a problem of torsion axle in these 307s?
08.05.2020 20:22 # 17
sonerkyl
There is no torsion problem in the 307s, sometimes there is a sound event from the shock absorber chocks, and the room chock changes.
08.05.2020 20:22 # 18
mustafa46
good bar i like it
08.05.2020 20:22 # 19
mustafa46
I inserted the plastic on the right side of the gas pedal, like the pictures in Saturday, and reached the hot water pipe coming from the engine, but the pipe was changed and I checked every place of the pipe. did not .. the mop started to dry at six, I bought the new vehicle, did not dry it on arrival before?
08.05.2020 20:22 # 20
sonerkyl
Maybe Mustafa had it built without selling it, maybe the old owner, but you can still check the water level.
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”