|
|
|
|
Airbag fault on the display and screen |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 20:32 | # 41 |
 Orcun.Dmr |
|
|
Good evening. I had to go somewhere, and while I was going out, I took off the pole of the car, after about 15 days, when I came back home and followed the car's battery, these damned airbag lamps turned on again and it doesn't stop. If the Com2000 is faulty, only the driver will get the airbag error, but the passenger airbag is failing in my vehicle. I haven't connected it to the computer yet, but it wasn't deleted when I tried to connect the computer and delete the error (if I remember correctly). Do you have any suggestions (check this, unplug any socket related to airbag etc.), I don't want to change com2000 to empty space. |
|
| 08.05.2020 20:32 | # 42 |
 talip206 |
|
|
[QUOTE = Orçun.Dmr] No good evening. I had to go somewhere, and while I was going out, I took off the pole of the car, after about 15 days, when I came back home and followed the car's battery, these damned airbag lamps turned on again and it doesn't stop. If the Com2000 is faulty, only the driver will get the airbag error, but the passenger airbag is failing in my vehicle. I haven't connected it to the computer yet, but it wasn't deleted when I tried to connect the computer and delete the error (if I remember correctly). Do you have any suggestions (check this, unplug any socket related to airbag etc.), I don't want to change com2000 to empty space. [/ QUOTE] If there are more than 2 airbags, that is, if there are airbags on the sides, there are sockets under the armpits, they may be loose. If you have 2 airbags, you don't need to look at the armpits at all. Another possibility and the high probability are the black plastic underneath the steering wheel, there are sockets that enter com2000. According to you, there is a brown socket on the far right, which makes it relax. Check it out. |
|
| 08.05.2020 20:32 | # 43 |
| Orcun.Dmr |
|
|
[QUOTE = talip206] [QUOTE = Orçun.Dmr] Good evening. I had to go somewhere, and while I was going out, I took off the pole of the car, after about 15 days, when I came back home and followed the car's battery, these damned airbag lamps turned on again and it doesn't stop. If the Com2000 is faulty, only the driver will get the airbag error, but the passenger airbag is failing in my vehicle. I haven't connected it to the computer yet, but it wasn't deleted when I tried to connect the computer and delete the error (if I remember correctly). Do you have any suggestions (check this, unplug any socket related to airbag etc.), I don't want to change com2000 to empty space. [/ QUOTE] If there are more than 2 airbags, that is, if there are airbags on the sides, there are sockets under the armpits, they may be loose. If you have 2 airbags, you don't need to look at the armpits at all. Another possibility and the high probability are the black plastic underneath the steering wheel, there are sockets that enter com2000. According to you, there is a brown socket on the far right, which makes it relax. Check it out. [/ QUOTE] Vehicle 6 Airbag 307 teacher, now I take the socket out. I looked at the underarm sockets, no loosening.
|
|
| 08.05.2020 20:32 | # 44 |
| Orcun.Dmr |
|
|
I disconnected all the cables connected to the Com2000, but they are still the same. In the morning the Delphi computer, which was not the original software, was connected to the vehicle and looked at it. The first one said something like VAN communication network high voltage, the second one gave error with the Airbag, the third one said that the exhaust gas outlet was too high, he said, I canceled the curve. We were unable to delete the computer because the vehicle malfunctions consistently. After giving these faults to the computer, we wanted to log out and look again, but the vehicle did not allow to be connected.  |
|
| 08.05.2020 20:32 | # 45 |
 onurrr41 |
|
|
The same thing is not to wear a helmet, but to fool the airbag with resistance. I recommend you to consider your life safety. What happens if we delete the values from the phone plugged into the airbag obd 2 port from where we can get the values?
|
|
| 08.05.2020 20:32 | # 46 |
| Orcun.Dmr |
|
|
[QUOTE = onurrr41] The same thing as not getting on the motor and wearing a helmet is to deceive the airbag with resistance. I recommend you to consider your life safety. What happens if we delete the values from the phone plugged into the airbag obd 2 port? [/ QUOTE] As I said it would be better to throw some resistance and deceive myself, make some money and fix the airbags. We can not delete the vehicle because it constantly gives the airbag error, we tried it on the original computer, we tried it on the computer with a fake software, but it does not get lost, unfortunately.
|
|
| 08.05.2020 20:32 | # 47 |
| Orcun.Dmr |
|
|
Does anyone know where the airbag brain is? If I find the area where the brain is, I will unplug it and plug it in again. It does not look like the Com2000 malfunction, the com2000 malfunction is not a horn and only the driver's airbag lamp lights up in the display. I hope there is no problem in the brain ...
|
|
| 08.05.2020 20:32 | # 48 |
| Orcun.Dmr |
|
|
Good day to everyone. I solved my problem with only 1 TL cost. If we come to how I handle it; If the driver and passenger airbag light is on the display of your vehicle, you will have to remove the 10 amp red colored fuse located in the 16th row in the vehicle BSI and fix it again. Thank you to friends and brothers who helped and generate ideas.
|
|
| 08.05.2020 20:32 | # 49 |
 sonerkyl |
|
|
[QUOTE = Orçun.Dmr] Good day everyone. I solved my problem with only 1 TL cost. If we come to how I handle it; If the driver and passenger airbag light is on the display of your vehicle, you will have to remove the 10 amp red colored fuse located in the 16th row in the vehicle BSI and fix it again. Thank you to friends and brothers who helped and produced ideas. [/ QUOTE] Thank you also for information and feedback.
|
|
| 08.05.2020 20:32 | # 50 |
| Orcun.Dmr |
|
|
[QUOTE = sonerkyl] [QUOTE = Orçun.Dmr] Good day everyone. I solved my problem with only 1 TL cost. If we come to how I handle it; If the driver and passenger airbag light is on the display of your vehicle, you will have to remove the 10 amp red colored fuse located in the 16th row in the vehicle BSI and fix it again. Thank you to friends and brothers who helped and produced ideas. [/ QUOTE] Thank you also for information and feedback. [/ QUOTE] It is not important why the monument was removed after removing the fuse and it got stuck in my mind. Electricity passes through the same fuse to the motor brain and elsewhere. When I remove the fuse and open the contact, they will wipe, the headlights are open, so the head is seven, because of one fuse. When I put the insurance on it, it was okay.
|
|
| 08.05.2020 20:32 | # 51 |
| sonerkyl |
|
|
The most beautiful orçun brother passed, I removed all the fuses and relays of the vehicle and cleaned their feet. you can even do what I do, remove and clean with sandpaper and put it back in place and check it. it took me 1 hour
|
|
| 08.05.2020 20:32 | # 52 |
| Orcun.Dmr |
|
|
I do not have time, bro. I will replace all the fuses.
|
|
| 08.05.2020 20:32 | # 53 |
| Orcun.Dmr |
|
|
The same problem started again after 2 years, unfortunately, I parked the car, and I will turn off the airbag lamps both burned again. It was burned out 2 months ago, but when it was turned out 3-4 times, it got better, is it possible that the problem is in the brain or the airbag? Please can you answer?
|
|
| 08.05.2020 20:32 | # 54 |
| Orcun.Dmr |
|
|
After a 2-day break, I started the car, error codes and malfunction lights disappeared, no trouble.
|
|
| 08.05.2020 20:32 | # 55 |
| ugur9tezcan |
|
|
I was constantly having the same problem. It does it from the airbag wrap on the steering wheel. It was suddenly burning when I passed the rough road or used the signal lever. I pull the steering adjustment lever, lift it up and down 1-2 times, and then bring it to the right angle for me. Then I start the car and the problem disappears. It became a chronic problem and unfortunately I got used to it. Your problem may be the same as mine, or perhaps a different problem. At least you can try.
|
|
| 08.05.2020 20:32 | # 56 |
 umitedi |
|
|
Sometimes my Peuget 206 was giving an audible warning while on the road. When bib warns, the airbag light is on and the tachometer does not work. Sometimes the vehicle was not working or was running late. The solution of this problem: When you stand in front of the engine, which controls all these warnings and controls the speed indicator with the airbag light, this control box controls the motor control card with 3 waterproof sockets on the left of the engine or whatever its name is. At first I thought there was contactlessness in the socket. Because it was somewhat improved when we removed the plugs. But the malfunction did not pass, it was repeated. The vehicle was not working when the engine fault light on the right of the chest was not on anyway ... For this malfunction, I opened the inside of this 3-socket box by removing 4 screws. Since I was an electronics engineer, I removed all the screws of the socket. I removed the back metal of the box. When I reached the card, I refreshed all the solders of the sockets. Then I collected it again. TROUBLESHOOTED. AIRBAG LIGHT AND TIME INDICATOR IS CONNECTED TO THIS CARD.
|
|
| 08.05.2020 20:32 | # 57 |
| Orcun.Dmr |
|
|
[QUOTE = ugur9tezcan] I was constantly having the same problem. It does it from the airbag wrap on the steering wheel. It was suddenly burning when I passed the rough road or used the signal lever. I pull the steering adjustment lever, lift it up and down 1-2 times, and then bring it to the right angle for me. Then I start the car and the problem disappears. It became a chronic problem and unfortunately I got used to it. Your problem may be the same as mine, or perhaps a different problem. At least you can try. [/ QUOTE] Thank you very much for your advice, unfortunately my problem is not a problem when I go through a different road or play with the steering wheel settings. If it is caused by the winding, only the airbag light will be on, the passenger airbag light is on, and for the last 1-2 months, I have not encountered the slightest trouble since the weather has warmed. My vehicle also has 6 airbags and I checked all of them up to their sockets and electrical installations one by one, measured the electric currents one by one, there is no problem, the installation and the sockets are solid. Before I changed the fuse number 10 on the BSI brain, the problem was solved. When the Airbag lights turned on again, I changed the fuse again, but it did not come to my mind to measure if there was electricity. We looked at the computer with a fake software and got the airbag computer error. |
|
| 08.05.2020 20:32 | # 58 |
| Orcun.Dmr |
|
|
[QUOTE = hoped] My Peuget 206 was occasionally giving an audible warning while on the road. When bib warns, the airbag light is on and the tachometer does not work. Sometimes the vehicle was not working or was running late. The solution of this problem: When you stand in front of the engine, which controls all these warnings and controls the speed indicator with the airbag light, this control box controls the motor control card with 3 waterproof sockets on the left of the engine or whatever its name is. At first I thought there was contactlessness in the socket. Because it was somewhat improved when we removed the plugs. But the malfunction did not pass, it was repeated. The vehicle was not working when the engine fault light on the right of the chest was not on anyway ... For this malfunction, I opened the inside of this 3-socket box by removing 4 screws. Since I was an electronics engineer, I removed all the screws of the socket. I removed the back metal of the box. When I reached the card, I refreshed all the solders of the sockets. Then I collected it again. TROUBLESHOOTED. AIRBAG LIGHT AND TIME INDICATOR IS CONNECTED TO THIS CARD. [/ QUOTE] My vehicle 307 teacher does not have any brain on the left side of the engine, could the engine you are talking about be the engine brain, the ECU?
|
|