Where Can I Install Cruize Control for 307? - 307

Hello friends, I bought a 2003 model 307 SW Pack. I want to have a cruize control on the car. There is no service I found on the internet but I did not find a service to install. Greetings.

dehsetilyo 2014-10-07 22:41:49

Have you checked the brake sensor? If the brake sender has 4 cables, there are 2 masters in his umbrellas. I will share the contact information in the car tomorrow.

If you were in Ankara, I would have helped, but Istanbul is out of my shooting area: D

If you find a master (pp2000 and pejo diagnostic cable) I can route.

@alicilik How much is Ankara doing? :))

Today I went to Umraniye (FSM) industry g_tac is 2014-07-01 19:45:20

[QUOTE = Serkan] Have you checked the brake sensor? If the brake sender has 4 cables, there are 2 masters in his umran, I will share the contact information in the car tomorrow. [/ QUOTE]

When I was researching in the forum yesterday, I read that the falcon was sponsored by Peugeot, I called the company today in the morning, they said that there was also a master in the umraniye industry that will assemble the arm in their hands, I went, I went to Şahin Peugeot, I went to the calender auto they described to learn whether the vehicle is compatible or not, they were interested. They checked the cables of the client, then they connected the car to the computer, but they could have Cruze control for Bsı, they could not make the motor brain somehow, the arm was not attached. He said that the motor brain software should change, I said that if we had to try it, he said that the work to be done later said OK. If there are other masters and company names that you will give, I will stop by them as well. Thank you for your interest.

g_tac is 2014-07-01 19:48:40

Özentaş industrial site C-Blok No: 11 Kaçmaz has electronic Tuğrul Usta you can stop by. The FSM industry is immediately adjacent.

Okay, I'll definitely stop by tomorrow.

Let me share a 6th, 7th, and 8th characters of your chassis number from the beginning to help. They may not be able to

OK I'm looking. g_tac is 2014-07-02 03:00:13

[QUOTE = Receiving] Let me share the 6th, 7th and 8th characters of your chassis number from the beginning. They may not be able to
[/ QUOTE] The 6,7,8th characters of the chassis are waiting for the NFU response. g_tac is 2014-07-02 03:01:26

Today, I went to the master who assigns the brain and other programs to the vehicles. Despite all our efforts, we could not activate the engine configuration in the PP2000 program. I gave up now, I guess it will not be.

For those who want to have Cruise control in Istanbul, there is Şahin Peugeot (Spare Parts company) in Ümraniye industry, they have both arm and experienced masters they can give you advice.

08.05.2020 18:39	# 1
g_tacir
Hello friends, I bought a 2003 model 307 SW Pack. I want to have a cruize control on the car. There is no service I found on the internet but I did not find a service to install. Greetings.

08.05.2020 18:39	# 2
KIZILASLAN
. dehsetilyo 2014-10-07 22:41:49

08.05.2020 18:39	# 4
Alicilik
If you were in Ankara, I would have helped, but Istanbul is out of my shooting area: D If you find a master (pp2000 and pejo diagnostic cable) I can route.

08.05.2020 18:39	# 5
alpdoner
@alicilik How much is Ankara doing? :))

08.05.2020 18:39	# 6
g_tacir
Today I went to Umraniye (FSM) industry g_tac is 2014-07-01 19:45:20

	Where Can I Install Cruize Control for 307?
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307

08.05.2020 18:39	# 3
Serkan
Have you checked the brake sensor? If the brake sender has 4 cables, there are 2 masters in his umbrellas. I will share the contact information in the car tomorrow.

08.05.2020 18:39	# 10
Alicilik
Let me share a 6th, 7th, and 8th characters of your chassis number from the beginning to help. They may not be able to

08.05.2020 18:39	# 11
g_tacir
OK I'm looking. g_tac is 2014-07-02 03:00:13

08.05.2020 18:39	# 12
g_tacir
[QUOTE = Receiving] Let me share the 6th, 7th and 8th characters of your chassis number from the beginning. They may not be able to [/ QUOTE] The 6,7,8th characters of the chassis are waiting for the NFU response. g_tac is 2014-07-02 03:01:26

08.05.2020 18:39	# 13
g_tacir
Today, I went to the master who assigns the brain and other programs to the vehicles. Despite all our efforts, we could not activate the engine configuration in the PP2000 program. I gave up now, I guess it will not be.

08.05.2020 18:39	# 14
g_tacir
For those who want to have Cruise control in Istanbul, there is Şahin Peugeot (Spare Parts company) in Ümraniye industry, they have both arm and experienced masters they can give you advice.