What You Need to Know Before Painting Your Vehicle .. - Modification and Tuning Information

It is understood that nothing can be understood that repair paints are perfect: No difference should be detected between the corrected place and the original paint.

This means that the color of the repair paint must match the color of the car precisely, or the painter must be able to adequately balance possible color tone differences. However, this is always getting more difficult due to the development in the automobile market.

Since the bodywork shapes are very similar, color is an important factor in decision making while buying a car today.

For this reason, designers in the automotive industry are constantly looking for new colors and effects, which causes the number of car colors to increase strongly:

Across Europe, from 2,500 shades in 1970 to almost 20,000 shades in 1996; A few hundred new shades and personal color applications are added to each year.

The preparation of the Fabricated Tint varies for a variety of reasons. Therefore, some nuances should be given importance while determining the color tone to be applied.

Among them are:

* It is impossible for Auto Paint Dealers to have Thousands of Colors in their stocks, so the best color determination is the preparation of the paint with the mixture.

* If the complete vehicle will be painted or a damaged part will be painted, the polishing machine should be cleaned as much as a hand.

* Mixture should be prepared with the paint code on the vehicle.

* It should be considered whether the color on the vehicle is a fabricated color.

* Thinners or solvents to be used in Paint Mixing must be prepared properly and should not contain any extra solvent.

* In Pearlescent Paints, extra paint should be prepared considering the vehicle will be damaged since the vehicle will be painted completely and the mixture formula prepared for the vehicle must be noted.

* If you want to enter light metal into the paint you have prepared (known name; SIM), its dose must be min. When it is applied to the vehicle, metal painted mixtures are added. stains will appear as if there are water droplets in the paint, essentially they will be placed on your vehicle as part of the paint, not the stain.

ALINTIDIR.

08.05.2020 13:55	# 1
Guests
It is understood that nothing can be understood that repair paints are perfect: No difference should be detected between the corrected place and the original paint. This means that the color of the repair paint must match the color of the car precisely, or the painter must be able to adequately balance possible color tone differences. However, this is always getting more difficult due to the development in the automobile market. Since the bodywork shapes are very similar, color is an important factor in decision making while buying a car today. For this reason, designers in the automotive industry are constantly looking for new colors and effects, which causes the number of car colors to increase strongly: Across Europe, from 2,500 shades in 1970 to almost 20,000 shades in 1996; A few hundred new shades and personal color applications are added to each year. The preparation of the Fabricated Tint varies for a variety of reasons. Therefore, some nuances should be given importance while determining the color tone to be applied. Among them are: * It is impossible for Auto Paint Dealers to have Thousands of Colors in their stocks, so the best color determination is the preparation of the paint with the mixture. * If the complete vehicle will be painted or a damaged part will be painted, the polishing machine should be cleaned as much as a hand. * Mixture should be prepared with the paint code on the vehicle. * It should be considered whether the color on the vehicle is a fabricated color. * Thinners or solvents to be used in Paint Mixing must be prepared properly and should not contain any extra solvent. * In Pearlescent Paints, extra paint should be prepared considering the vehicle will be damaged since the vehicle will be painted completely and the mixture formula prepared for the vehicle must be noted. * If you want to enter light metal into the paint you have prepared (known name; SIM), its dose must be min. When it is applied to the vehicle, metal painted mixtures are added. stains will appear as if there are water droplets in the paint, essentially they will be placed on your vehicle as part of the paint, not the stain. ALINTIDIR.

08.05.2020 13:55	# 2
Guests
thanks for sharing

08.05.2020 13:55	# 3
Guests
How happy we are if we could be useful.

	What You Need to Know Before Painting Your Vehicle ..
• Homepage » PEUGEOT MODIFIED PLATFORM » Modification and Tuning Information