|
|
|
Using 2004 model 307 trip computer |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 15:20 | # 1 |
|
|
|
| 08.05.2020 15:20 | # 2 |
|
I think it was the wiper arm (wiper arm on the right) ) you can press and change the head side ... As for the other problem; you need to change the bulbs on the trip computer, I think I should not have given false information.
|
|
| 08.05.2020 15:20 | # 3 |
|
Are these bulbs everywhere, I'm a little tech-savvy |
|
| 08.05.2020 15:20 | # 4 |
|
do not read and pass friends please share your information to the new peugeot family |
|
| 08.05.2020 15:20 | # 5 |
|
I think they change it in industry There are more knowledgeable friends, the authors are certain when they see it. |
|
| 08.05.2020 15:20 | # 6 |
|
thank you we got it let's hope it won't regret it
|
|
| 08.05.2020 15:20 | # 7 |
|
I have 1.6 I am glad, I hope you will be frankly.
|
|
| 08.05.2020 15:20 | # 8 |
volkan_uysal |
|
|
Welcome my friend.... The date and time appear on the same screen, if you want to change it, there is a button on the top of the wiper arm (right) with a jog button that means you can press and release it like a television remote. Press there, you will see values such as date - time, gasoline, average fuel, instant consumption. On the left handle, the same button turns the auto headlight sensor on and off. In my car like this 307 2004 XT 1.6 110 BG |
|
| 08.05.2020 15:20 | # 9 |
|
Thank you for the information you provided. |
|
| 08.05.2020 15:20 | # 10 |
metin |
|
|
the http://forum.peugeotturkey.com/forum_posts.asp?tıd=7976&title=peugeot-206-307-saat-lcd-ekrann-skl If you do a bit of research on this topic today, there is a lot of information you can learn about the vehicle. There are 3 bulbs on the back of the screen, the fading that changes them goes. it often becomes faint in the heat.
|
|
| 08.05.2020 15:20 | # 11 |
|
i have the same problem..how can i remove this indicator..do i have a picture
|
|
| 08.05.2020 15:20 | # 12 |
dinoco |
|
|
the bulbs are available in any electrician, ranging from 0.50 cents to 2 tl.
|
|
| 08.05.2020 15:20 | # 13 |
metin |
|
|
[QUOTE = text] the http://forum.peugeotturkey.com/forum_posts.asp?tıd=7976&title=peugeot-206-307-saat-lcd-ekrann-skl If you do a bit of research on this topic today, there is a lot of information you can learn about the vehicle. There are 3 bulbs on the back of the screen, the fading that changes them goes. it often becomes faint in the heat. [QUOTE = hantsome28] I have the same problem .. how do I remove this indicator .. do I have a picture with a picture [/ QUOTE] [/ QUOTE] I have already given the link here, it shows how it is disassembled in a picture.
|
|
| 08.05.2020 15:20 | # 14 |
|
friends trip computer screen is still showing date and time no button pressed at the front of the wiper arm there is no button actually not pressing how i do not understand this my car 2004 model 1.4 hdı xr 6 waiting for your help from the air cushioned one
|
|
| 08.05.2020 15:20 | # 15 |
metin |
|
|
alla alla com2000 is not compatible. |
|
| 08.05.2020 15:20 | # 16 |
|
I do not understand too, so-called vehicle full bidet com2000 what is happening I bought this tool just do not know exactly what is what |
|
| 08.05.2020 15:20 | # 17 |
|
In the 307 xr 2004, at least I do not know what I knew later it was installed, I did the software that was dead.
|
|
| 08.05.2020 15:20 | # 18 |
metin |
|
|
The com2000 covers the complete signal and the wiper arm, so the com2000 is the wiper arm with a button on the end. Since you do not have a button on the end, I think it should be completely replaced with a button, but it would be better if mdincer34 says that only the tip changes.
|
|
| 08.05.2020 15:20 | # 19 |
|
Well, I do not know if there is a trip computer in the vehicle or not.
|
|
| 08.05.2020 15:20 | # 20 |
|
when there is a trip computer, is there an arrow like an arrow at the end of the rotating piece to squirt water on the rear wiper arm
|
|