![]() ![]() |
|
![]() |
There Is A Solution That Works For All Al4 Transmissions |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
15.10.2022 20:28 | # 1 |
![]() |
|
Once we watch this video. The description of the application is below: 1- The vehicle will be at operating temperature (temperature range of 70-100) 2- We start the vehicle. 3- We press the brake. 4- When the foot is on the brake, we shift the gear to N and we never take the foot off the brake. We wait in N position for 2 minutes with the foot on the brake. 5- After 2 minutes, we move the vehicle from N position to D position. (We will never leave the brake from the beginning to the end) 6- We wait for 2 more minutes in D position with the foot still on the brake. 7- After 2 minutes, we move the vehicle from D position to P position with the foot still on the brake and stop the vehicle and the foot still remains on the brake. 8- With the vehicle stopped, with the foot on the brake and the gear in the P position, we wait another 5-10 seconds and release the brake and open the driver's door. That's it. Remember, the foot will never be released from the brake until before opening the driver's door. Summary: start the car, apply the brake, shift to N and wait 2 minutes; then switch it to D and wait 2 minutes, then switch it to P and stop and wait 5-10 seconds, release the brake and open the driver's door. Never take your foot off the brake while applying gear. That's all my name. You will see that the gear shifts are stable.
|
17.10.2022 14:30 | # 2 |
![]() |
|
hello sir. first of all thank you for this nice sharing. In almost all of the comments in the video, people stated their good wishes and that it worked. I will try it tonight. Let's see if the problem in gear shifts will be fixed.. By the way, I opened a topic about al4 gearbox (you can access the topic by clicking here) What is your opinion on this subject?
|