|
|
|
|
The rear right of the car is closer to the ground than the left. |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 15:07 | # 1 |
 fifietto |
|
|
I bought a Peugeot 206 today, I think the owner before me has lowered the back of the car, the stern of the car is very close to the ground but the right side is at least 10 inches below the left, because the helix settings are different from each other? where should I go to get it set up ?? |
|
| 08.05.2020 15:07 | # 2 |
 se®k@n |
|
|
It may be caused by torsion adjustment. One of the shock absorbers may break out. A good shock absorber tells you what it came from.
|
|
| 08.05.2020 15:07 | # 3 |
 tugrahan |
|
|
Didn't you look at your right while my friend was buying? Without spiral adjustment, it is adjusted from torsion at the back, torsion bearing may be defective |
|
| 08.05.2020 15:07 | # 4 |
 herry |
|
|
Didn't you look while you are buying my friend?
|
|
| 08.05.2020 15:07 | # 5 |
| fifietto |
|
|
Guys, because I haven't encountered a situation like this before, I can see my reed. Now I researched a little, I think from the Torsion setting .. Thanks for the comments .. If there is a friend from Izmir, please help, which master would I take ??
|
|
| 08.05.2020 15:07 | # 6 |
| fifietto |
|
|
Friends, the bows in front were different from each other, so it was also affecting the back. |
|
| 08.05.2020 15:07 | # 7 |
 Guests |
|
|
I do not understand what broadcast you are talking about ??? The back of 206 is already torsion. therefore no bow !!!
|
|
| 08.05.2020 15:07 | # 8 |
 dukenukem82 |
|
|
Talking about the bow in front of the previous post accidentally 
|
|
| 08.05.2020 15:07 | # 9 |
| Guests |
|
|
[QUOTE = dukenukem82] talks about the bow in front of the previous post accidentally [/ QUOTE] hm yeah you're right ... :))
|
|