|
|
|
|
Supply of 307 sunroof parts |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 15:43 | # 1 |
 ismail ozdemir |
|
|
I have a 2002 model 307xt vehicle, I have not had a problem with the sunroof for 1.5 years, but last week, I opened up to the other side, not completely, and with a tremor, it closed itself again, and when I brought it to the closing position 1 step longitudinally, there was a small interval and it did not close 1 When the stage is in the open position, it closes right now, when I open it completely, the last stage does not open, when it is opened up, it opens and closes itself, so it is like something has been thrown out of the place. > AlbaYDemircaN |
|
| 08.05.2020 15:43 | # 2 |
 metin |
|
|
Have you tried the reset method? |
|
| 08.05.2020 15:43 | # 3 |
| ismail ozdemir |
|
|
how is it???
|
|
| 08.05.2020 15:43 | # 4 |
| metin |
|
|
reset If you want k, turn the power switch to position 3, just lift the back side, then push the button in for a few seconds, it will be reset,
|
|
| 08.05.2020 15:43 | # 5 |
| ismail ozdemir |
|
|
thank you when you go back in the evening and when I lift the back immediately, it is okay to come down again, so it is enough that the button is at the third position.
|
|
| 08.05.2020 15:43 | # 6 |
| metin |
|
|
Well, I did not have such a problem, it just did not stop and open when I shook hands, I reset it, other functions were working. It is good to try at position 3, the back of the top will be raised there, hold the button in for 3-5 seconds will be reset.
|
|
| 08.05.2020 15:43 | # 7 |
 Guests |
|
|
It will not hurt to try ... Also don't neglect to have sunroof maintenance written here. Otherwise, it may be possible to experience a problem such as water inlet etc. etc. |
|
| 08.05.2020 15:43 | # 8 |
| ismail ozdemir |
|
|
arrow. If I don't have a reset, if not, I would go to a sunroof and show what kind of trouble it might be, so could the engine be faulty?
|
|
| 08.05.2020 15:43 | # 9 |
| metin |
|
|
I think the engine will not work at all if it is faulty.
|
|
| 08.05.2020 15:43 | # 10 |
| ismail ozdemir |
|
|
Metin Bey, I did what you said yesterday, in fact, it was always on my mind, but I was afraid that it would be a problem, I couldn't do it yesterday.
|
|
| 08.05.2020 15:43 | # 11 |
| metin |
|
|
[QUOTE = ismail özdemir] Metin Bey, I did what you said yesterday, it was always on my mind but I was afraid that it would be a bit of a problem yesterday. DIV> I would like . I'm glad it improved. Do not be afraid of the reset method does no harm. If it does not improve despite the reset, then there is a problem.
|
|
| 08.05.2020 15:43 | # 12 |
 sinka251 |
|
|
Metin Bey I have a question that I have a question, I said, let me ask you from here. as if it wasn't printed
|
|