|
|
|
|
Spring pressing |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » All Questions About Your Vehicle | |
| 08.05.2020 16:50 | # 1 |
 yigiteroglu |
|
|
|
|
| 08.05.2020 16:50 | # 2 |
 koliva |
|
|
[QUOTE = yigiteroglu] Hello friends, is my car standing slightly higher than the front and the back? Is it healthy to heat the spring and print it? You will buy a new bow and obsess. You will keep your originals. |
|
| 08.05.2020 16:50 | # 3 |
| yigiteroglu |
|
|
So what would be the cost if they were made by lowering the back torsion with spring
|
|
| 08.05.2020 16:50 | # 4 |
 Alicilik |
|
|
Front springs vary between 50 and 1000tl depending on the brand and shortening size. My recommendation Einbach pro kit does not drop much in 3.5cm comfort. If you put 1-2 teeth in a good master in the back torsion, it would be perfect. It also changes according to the master's price schedule. Reviews |
|
| 08.05.2020 16:50 | # 5 |
 toga406 |
|
|
spring press actually is close to the ground in peugeot, I think if you are not the first owner of the car, they have overhauled and changed the springs |
|
| 08.05.2020 16:50 | # 6 |
 Quiksilver_106 |
|
|
I definitely do not recommend it, I do not recommend it in any way .. You should definitely do this with SPORT spring .. Heating or cutting the bow is very dangerous .. take a sport & nbsp; enjoy the bow & nbsp;
|
|
| 08.05.2020 16:50 | # 7 |
| yigiteroglu |
|
|
Thanks for your valuable comments. It is most logical to adjust the material situations and become a sports bow.
|
|
| 08.05.2020 16:50 | # 8 |
| yigiteroglu |
|
|
Hello friends. There is an angel headlight and LED stop on the vehicle that will be attached to the vehicle with a 20 g bumper, the paint will be attached to the vehicle on Tuesday or carsamba day. There is a problem in the same way. I certainly do not want to get a low altitude sound, I am undecided. I do not want to get a modest exaggeration.
|
|
| 08.05.2020 16:50 | # 9 |
| gngburak |
|
|
Everything was normal when I got the car. There was a torsion problem. I left the car. What should I see after 2 days. The back of the car is almost on the ground. I can not get through the bumps. I said how to be. He said to the master 15 days later, we'll take him away. 15 days later I went, he did something, look at his result now ..... & nbsp; & nbsp; type of car registration. & nbsp; & nbsp; I'm going to go a long way this week and now we will download it in Izmir.
|
|
| 08.05.2020 16:50 | # 10 |
| Quiksilver_106 |
|
|
How did you meet a master, but the butcher is officially what is this?
|
|
| 08.05.2020 16:50 | # 11 |
| gngburak |
|
|
ewet vallahi & nbsp; But there is no master here who can understand the job properly.
|
|
| 08.05.2020 16:50 | # 12 |
 okan4037 |
|
|
keep this picture I have never seen such a raised car in my life. It's a joke, definitely restore torsions & nbsp; only 2 spring material you change will be more or less the same, why would you heat it? The most harmful are better heating prediction is lousy prediction is going to be nailing fk (no truth in turkey) & nbsp; take it and press 5 cm .. You can not find a person who recommends 3.5 using & nbsp; why 3.5 is recommended I still do not understand (as a sports bow so much) & nbsp; respects
|
|
| 08.05.2020 16:50 | # 13 |
| gngburak |
|
|
Thank you I laughed at your message but I did not open the subject. such an incident happened to me too. I stopped. I watched. (I don't know the name in shims, but) DIV> & nbsp; I saw that the result is frustration. But as I said, I will go on a long road, I will have it built in Izmir .....
|
|
| 08.05.2020 16:50 | # 14 |
| yigiteroglu |
|
|
Hodja had passed the car without shame, it would be sure that I would be sure to talk to you.
|
|
| 08.05.2020 16:50 | # 15 |
| gngburak |
|
|
:) I said brother, there is no place that understands what to do here.
|
|
| 08.05.2020 16:50 | # 16 |
| yigiteroglu |
|
|
Anyway, at least get over it, at least the car is running :)
|
|
| 08.05.2020 16:50 | # 17 |
| gngburak |
|
|
Yeah, but I'm afraid it will be blown away
|
|
| 08.05.2020 16:50 | # 18 |
 tigerland |
|
|
[QUOTE = gngburak] Everything was normal when I got the car. had a torsion problem. I left the car. What should I see after 2 days, the back of the car is almost on the ground. div> I said how will it be, he said to the master, come back 15 days, we will remove it. a href = "http://bit.ly/c25MCx" target = "_ blank" rel = "nofollow"> ![]("http://g1206.hizliresim.com/y/9/7phvn.jpg") & nbsp; type of car registration. & Nbsp; & nbsp; I'm going to go a long way this week and now we will download it in izmir. I wonder if I laughed :) sorry if it lifts a little more, camel trophy is done :))
|
|
| 08.05.2020 16:50 | # 19 |
| gngburak |
|
|
Sorry, why should I regret it? |
|
| 08.05.2020 16:50 | # 20 |
| gngburak |
|
|
[QUOTE = yigiteroglu] Anyway, at least, with at least the vehicle is at home:) [/ QUOTE] my valiant friend & nbsp; Sorry, you're on the topic, but everybody's looking at my car.
|
|