Sports spring + rear torsion lowering - Modification and Tuning Information

Hello friends,

My car is in the picture, I took it on the first day.

I want to buy a bow from a friend sells for 100 YTL, springs of 3.5 .. brand eibach.

If the price is suitable, I want to buy the springs. Can you comment on the picture of my car? The person I bought the vehicle sold me the vehicle, dismantled all accessories, angel, tape, sound system, image system, bow etc ...

In other words, there was a spring in the vehicle before but it is not available now. When I took my car to the peugeot service, I also asked them to lower it, but they suggested that I go to the lathe.

Now I want to list my questions:

Is this a job that every lathe can do?
Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle)
How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring?
Is the height of my vehicle in the picture ex-factory?
Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks.
Can I insert the screw in the spring, or should I take it to a separate location for the spring?
How much does the average labor cost cost

I asked a lot of questions, thank you for your time Sleepy

DERAN_TUYN is 2008-07-01 15:07:44

[QUOTE = Kerten]

Is this a job that every lathe can do?
Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle)
How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring?
Is the height of my vehicle in the picture ex-factory?
Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks.
Can I insert the screw in the spring, or should I take it to a separate location for the spring?
How much does the average labor cost cost

I asked a lot of questions, thank you for your time Sleepy

[/ QUOTE]

- No Need for Torners Any Mechanic of Lowers from Torsion.

3.5 cm is normal if 4-5 people are sitting.

- Lower the back 2.5 cm and stay 1 cm higher than the front.

- Vehicle height normal factory outlet.

- I don't have the picture.

- It makes mechanic not to drop the spring from torsion.

- In Istanbul, you get 50 Ytl spring + Back torsion adjustment.

aklncl 2008-07-01 11:56:57

3.5 cm jewelery. Look at you ...

Thank you very much for your help .. As you said, I will wear 3.5 and enjoy it, I will share the pictures with you.

Yes, if you wear 3.5, you will be comfortable with the vehicle .. As you can see in the picture below, I also use 3.5 ... You were wondering how the 3.5 spring bow stops in the car ....

[QUOTE = aklncl] [QUOTE = Kerten]

Is this a job that every lathe can do?
Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle)
How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring?
Is the height of my vehicle in the picture ex-factory?
Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks.
Can I insert the screw in the spring, or should I take it to a separate location for the spring?
How much does the average labor cost cost

I asked a lot of questions, thank you for your time Sleepy

[/ QUOTE]

- No Need for Torners Any Mechanic of Lowers from Torsion.

3.5 cm is normal if 4-5 people are sitting.

- Lower the back 2.5 cm and stay 1 cm higher than the front.

- Vehicle height normal factory outlet.

- I don't have the picture.

- It makes mechanic not to drop the spring from torsion.

- In Istanbul, you get 50 Ytl spring + Back torsion adjustment.

[/ QUOTE]

Where do they wear 50 ytl y?

I have 5 cm ei.

[QUOTE = Nightmares] [QUOTE = aklncl] [QUOTE = Kerten]

Is this a job that every lathe can do?
Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle)
How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring?
Is the height of my vehicle in the picture ex-factory?
Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks.
Can I insert the screw in the spring, or should I take it to a separate location for the spring?
How much does the average labor cost cost

I asked a lot of questions, thank you for your time Sleepy

[/ QUOTE]

- No Need for Torners Any Mechanic of Lowers from Torsion.

3.5 cm is normal if 4-5 people are sitting.

- Lower the back 2.5 cm and stay 1 cm higher than the front.

- Vehicle height normal factory outlet.

- I don't have the picture.

- It makes mechanic not to drop the spring from torsion.

- In Istanbul, you get 50 Ytl spring + Back torsion adjustment.

[/ QUOTE]

Where do they wear 50 ytl y?

I have 5 cm ei.

[/ QUOTE]

Call me. If I come, they will wear it.

we wait for reform service

[QUOTE = 306TT] welcome to reform service [/ QUOTE]

No need to call anymore, the address is certain; Özgür Ermek.

[QUOTE = AKlNCl] [QUOTE = 306TT] welcome to reform service [/ QUOTE]

No need to call anymore, the address is certain; Özgür Ermek.

[/ QUOTE]

God bless you

Our free brother makes the place saanaa..GFB makes you more beautiful ..

[QUOTE = cloud]

Our free brother makes the place saanaa..GFB makes you more beautiful ..

[/ QUOTE]

uA, not GFB LOL

but thanks dear :)

When I dropped back torsions, I looked at it later.

I did not understand this torsion job help please ...

08.05.2020 13:56	# 1
kerten
Hello friends, My car is in the picture, I took it on the first day. I want to buy a bow from a friend sells for 100 YTL, springs of 3.5 .. brand eibach. If the price is suitable, I want to buy the springs. Can you comment on the picture of my car? The person I bought the vehicle sold me the vehicle, dismantled all accessories, angel, tape, sound system, image system, bow etc ... In other words, there was a spring in the vehicle before but it is not available now. When I took my car to the peugeot service, I also asked them to lower it, but they suggested that I go to the lathe. Now I want to list my questions: Is this a job that every lathe can do? Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle) How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring? Is the height of my vehicle in the picture ex-factory? Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks. Can I insert the screw in the spring, or should I take it to a separate location for the spring? How much does the average labor cost cost I asked a lot of questions, thank you for your time DERAN_TUYN is 2008-07-01 15:07:44

08.05.2020 13:56	# 2
Guests
[QUOTE = Kerten] Is this a job that every lathe can do? Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle) How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring? Is the height of my vehicle in the picture ex-factory? Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks. Can I insert the screw in the spring, or should I take it to a separate location for the spring? How much does the average labor cost cost I asked a lot of questions, thank you for your time [/ QUOTE] - No Need for Torners Any Mechanic of Lowers from Torsion. 3.5 cm is normal if 4-5 people are sitting. - Lower the back 2.5 cm and stay 1 cm higher than the front. - Vehicle height normal factory outlet. - I don't have the picture. - It makes mechanic not to drop the spring from torsion. - In Istanbul, you get 50 Ytl spring + Back torsion adjustment. aklncl 2008-07-01 11:56:57

08.05.2020 13:56	# 3
sinan-s
3.5 cm jewelery. Look at you ...

08.05.2020 13:56	# 4
kerten
Thank you very much for your help .. As you said, I will wear 3.5 and enjoy it, I will share the pictures with you.

08.05.2020 13:56	# 5
ENGIN
Yes, if you wear 3.5, you will be comfortable with the vehicle .. As you can see in the picture below, I also use 3.5 ... You were wondering how the 3.5 spring bow stops in the car ....

	Sports spring + rear torsion lowering
• Homepage » PEUGEOT MODIFIED PLATFORM » Modification and Tuning Information

08.05.2020 13:56	# 7
Nightmares
[QUOTE = aklncl] [QUOTE = Kerten] Is this a job that every lathe can do? Would you recommend a 3.5 'spring? (sometimes there are 4-5 people total in the vehicle) How many teeth do I need to put down the rear torsion if I wear a 3.5 'spring? Is the height of my vehicle in the picture ex-factory? Do you have a picture of a 3.5 'spring mounted vehicle? I want to see how it looks. Can I insert the screw in the spring, or should I take it to a separate location for the spring? How much does the average labor cost cost I asked a lot of questions, thank you for your time [/ QUOTE] - No Need for Torners Any Mechanic of Lowers from Torsion. 3.5 cm is normal if 4-5 people are sitting. - Lower the back 2.5 cm and stay 1 cm higher than the front. - Vehicle height normal factory outlet. - I don't have the picture. - It makes mechanic not to drop the spring from torsion. - In Istanbul, you get 50 Ytl spring + Back torsion adjustment. [/ QUOTE] Where do they wear 50 ytl y? I have 5 cm ei.

08.05.2020 13:56	# 10
Guests
[QUOTE = 306TT] welcome to reform service [/ QUOTE] No need to call anymore, the address is certain; Özgür Ermek.

08.05.2020 13:56	# 11
Guests
[QUOTE = AKlNCl] [QUOTE = 306TT] welcome to reform service [/ QUOTE] No need to call anymore, the address is certain; Özgür Ermek. [/ QUOTE] God bless you

08.05.2020 13:56	# 12
Guests
Our free brother makes the place saanaa..GFB makes you more beautiful ..

08.05.2020 13:56	# 13
kerten
[QUOTE = cloud] Our free brother makes the place saanaa..GFB makes you more beautiful .. [/ QUOTE] uA, not GFB but thanks dear :)

08.05.2020 13:56	# 15
Guests
When I dropped back torsions, I looked at it later. I did not understand this torsion job help please ...

08.05.2020 13:56	# 6
Guests
THE BEST OF 5 PLUGS