|
|
|
|
rear wheel |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 14:14 | # 1 |
 elcinaydogdu |
|
|
2004 307 I have 1,6 vehicles. I noticed a situation in the past. It stands outside than the wheel. That is, the part of the wheel that steps on the ground and the top part is inside. What could be the reason for this situation .... What should I lay down?
|
|
| 08.05.2020 14:14 | # 2 |
 Sinan |
|
|
like capraz?
|
|
| 08.05.2020 14:14 | # 3 |
| elcinaydogdu |
|
|
the bottom of the rear left wheel (the part that steps on the road) is more outside than the other wheel and the upper part is inside.
|
|
| 08.05.2020 14:14 | # 4 |
 mahmutq |
|
|
it would be more understandable if you could lose a photo this way the problem is not very clear anything could be .......
|
|
| 08.05.2020 14:14 | # 5 |
 individual |
|
|
It is interesting that the upper part of the wheel is closer to the hood, naturally the angle of the one is higher than the other & nbsp;
|
|
| 08.05.2020 14:14 | # 6 |
 TheEchoes |
|
|
difficult question: D
|
|
| 08.05.2020 14:14 | # 7 |
 Long Beach |
|
|
not difficult question, not interesting & nbsp; rear axle bent towards the top, 307 rear its axes are not like 106, i guess (there are 106 torsion) i guess it will be traverse in 307 but i am not sure |
|
| 08.05.2020 14:14 | # 8 |
 Guests |
|
|
The rear wheels of peugeot and citroens are closed slightly on the upper side due to their production structure. the parts that step on the ground are more open. When looking from behind, it is closed from top to bottom in two tires. this slope should not be different. Or is the vehicle standing somewhere on the ground or maybe it could be a carpis on the sidewalk or something?
|
|
| 08.05.2020 14:14 | # 9 |
 hasimayaz |
|
|
It is necessary to measure in chassis .. there may be bending. |
|