Peugeot Forums - Peugeot Fan Club

Rear view camera location

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 20:54 # 1
ulas28
good day everyone
Is it possible to drill back and forth into the 3. STOP middle view camera? I think the viewing angle would be better, but I couldn't find what kind of tool I should use for drilling 3STOP. I expect comments from interesting people
08.05.2020 20:54 # 2
sonerkyl
I wouldn't recommend it, brother, the image you get from there will not be very healthy. There are cameras compatible with the license plate lamp in Aliexpreste.

08.05.2020 20:54 # 3
ulas28
I have a camera attached in the middle of the bumper. The view from above sounded as if it were wider and more beautiful. I wanted to share ideas.
08.05.2020 20:54 # 4
onlycihan
Well, what's going to be the back of the camera's screen? If it's 7 inches or something, getting a bird's eye view from a small screen makes things look too small and there is no detail.
08.05.2020 20:54 # 5
malicinar
In my old car (kia rio), I installed the rear view camera myself. I bought the camera attached to the license plate lamp suitable for the vehicle I bought from Ali expresion, so any drilling in the bumper etc. no need. Only in that vehicle, the license plate part was in the bumper, so as the camera is in the bumper area, I easily took the cables from the bottom of the trunk awning and added the cable that the parking sensor brain, which is located behind the inside of the trunk lid, is powered, so no cable pollution has occurred. Only in my new vehicle at 208, the license plate part is at the tailgate, so I couldn't understand the location of the camera's power and video cables to be passed inside the tailgate, I couldn't install the camera because it would require a more professional touch, does anyone know about this? If we put the belt in the tailgate like 208, how about the cable event) or as a solution, will we put the camera in the bumper.
Malick 2018-06-08 10:56:26
08.05.2020 20:54 # 6
sonerkyl
[QUOTE = malicinar] In my old car (kia rio) I installed the rear view camera myself. I bought the camera attached to the license plate lamp suitable for the vehicle I bought from Ali expresion, so any drilling in the bumper etc. no need. Only in that vehicle, the license plate part was in the bumper, so as the camera is in the bumper area, I easily took the cables from the bottom of the trunk awning and added the cable that the parking sensor brain, which is located behind the inside of the trunk lid, is powered, so no cable pollution has occurred. Only in my new vehicle at 208, the license plate part is at the tailgate, so I couldn't understand the location of the camera's power and video cables to be passed inside the tailgate, I couldn't install the camera because it would require a more professional touch, does anyone know about this? If we put the belt in the tailgate like 208, how about the cable event) or as a solution, will we put the camera in the bumper.
[/ QUOTE]

For mounting on the license plate lamp, you will have to remove the trunk lid cover and pass it through the bellows to the car. If there is such a thing, it will not be very difficult. You can continue the cable line under the flooring from the left or right rear post. A little dexterity will be sufficient.
08.05.2020 20:54 # 7
malicinar
[QUOTE = sonerkyl] [QUOTE = malicinar] In my old car (kia rio) I installed the rear view camera myself. I bought the camera attached to the license plate lamp suitable for the vehicle I bought from Ali expresion, so any drilling in the bumper etc. no need. Only in that vehicle, the license plate part was in the bumper, so as the camera is in the bumper area, I easily took the cables from the bottom of the trunk awning and added the cable that the parking sensor brain, which is located behind the inside of the trunk lid, is powered, so no cable pollution has occurred. Only in my new vehicle at 208, the license plate part is at the tailgate, so I couldn't understand the location of the camera's power and video cables to be passed inside the tailgate, I couldn't install the camera because it would require a more professional touch, does anyone know about this? If we put the belt in the tailgate like 208, how about the cable event) or as a solution, will we put the camera in the bumper.
[/ QUOTE]

For mounting on the license plate lamp, you will have to remove the trunk lid cover and pass it through the bellows to the car. If there is such a thing, it will not be very difficult. You can continue the cable line under the flooring from the left or right rear post. A little dexterity will be sufficient.
[/ QUOTE]

Thank you, sir, you are giving accurate answers. Thank you. I will share the results I will try
Malick 2018-06-08 11:12:17
08.05.2020 20:54 # 8
sonerkyl
You're welcome, my teacher. I would like to meet you if I can find time and come to the center when I come to Samsuna. Smile
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”