|
|
|
|
Peugeot 206 Parking Sensor Assembly |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 206 | |
| 08.05.2020 15:02 | # 1 |
 HRMNKY |
|
|
|
|
| 08.05.2020 15:02 | # 2 |
 metin |
|
|
If you bought nezmaan, we bought it in front of us. Take a copy by looking at the other tools (here: |
|
| 08.05.2020 15:02 | # 3 |
 Guests |
|
|
I think the price of 39 TL is very affordable. how do you know how to release material quality
|
|
| 08.05.2020 15:02 | # 4 |
| Guests |
|
|
bim has sold the same thing before. Then I took this parking sensor and attached it to my friend's vehicle. Pretty good, not bad. he also spoke turkish voice. that must be so. There seems to be a slight difference between the previous one and this one. If the picture is correct, the screen is the same but its sensors are smaller. it was also 48 TL when I bought it. it's 39 TL ... Also, this sensor will not be a text of them :)) just for the back. Because the distance between the rear sensors and the ten sensors is different, get crazy ... If you think that the sale has started today, I wouldn't miss it. anatech importer firmer is a nice firmer on the merter. I had bought a microwave oven before. There was a minor malfunction. Their interest in interest was very pleasing and surprised me :))
|
|
| 08.05.2020 15:02 | # 5 |
| metin |
|
|
I think today, let me go to friends parking sensor 39 TL, traffic set 16.90 TL, fire tube 11 TL, car phone holder 4.95 TL, reinforcement cable 10 TL, child seat 99 TL (: |
|
| 08.05.2020 15:02 | # 6 |
| Guests |
|
|
I told the father too. Let's take a parking sensorude to his car :)
|
|
| 08.05.2020 15:02 | # 7 |
| HRMNKY |
|
|
The same price as the last time sold in Sensor Bim this time is more affordable, but for 206, I don't know where to install this sensor.
|
|
| 08.05.2020 15:02 | # 8 |
| Guests |
|
|
If you read his booklet well, he writes very clearly how to wear it. It is not necessary to have a lot of information. I took it too and put it on my friend's car. I also attached it to my vehicle. The important thing is to think technically ... some of them are wearing the sensor with the sensor facing upwards. The sensor should look straight, and should be parallel to the ground, and neither too low nor too high. or where it is stuck, it should be in pain to easily perceive obes Except if it is good to put the external sensors in the full bumper of the bumper. it should be a little bit out of the corner and not looking too far out. it should generally look towards the back of the vehicle. The distance between the external sensors should be divided by 3 and internal sensors should be installed at the corresponding points. but this may differ from vehicle to vehicle. Because different bumper configurations of each vehicle are not similar, different applications may be required. For example, since the plate is in the bumper in my car, the middle sensors are a bit far from each other. Nothing else to do ... |
|
| 08.05.2020 15:02 | # 9 |
| metin |
|
|
[QUOTE = cecoli] bim has sold the same thing before. Then I took this parking sensor and attached it to my friend's vehicle. Pretty good, not bad. he also spoke turkish voice. that must be so. There seems to be a slight difference between the previous one and this one. If the picture is correct, the screen is the same but its sensors are smaller. it was also 48 TL when I bought it. it's 39 TL ... Also, this sensor will not be a text of them :)) just for the back. Because the distance between the rear sensors and the ten sensors is different, get crazy ... If you think that the sale has started today, I wouldn't miss it. anatech importer firmer is a nice firmer on the merter. I had bought a microwave oven before. There was a minor malfunction. Their interest in interest was very pleasing and surprised me :)) [/ QUOTE]  |
|
| 08.05.2020 15:02 | # 10 |
 Ozgur |
|
|
Gentlemen, I bought my car from this sensor. Don't go to waste. but try your luck. |
|
| 08.05.2020 15:02 | # 11 |
| Ozgur |
|
|
I will add pictures today.
|
|
| 08.05.2020 15:02 | # 12 |
 BuRCaK |
|
|
let's say you put it on. Doesn't this sensor connect to reverse gear? I know it wrong? how will you do it?
|
|
| 08.05.2020 15:02 | # 13 |
 ali oncu |
|
|
I wonder if there is a sensor
|
|
| 08.05.2020 15:02 | # 14 |
| Guests |
|
|
[QUOTE = HRMNKY] Guys, have a nice day. I bought a parking sensor from Me and I want to have it installed on our 206. Where should I install this sensor on the buffer. I have friends, I have a master, I asked him, he says free of charge, and he speaks Turkish, there is nowhere for this price. who want to have income together. |
|
| 08.05.2020 15:02 | # 15 |
| Guests |
|
|
do not speak Turkish I'm wearing it tomorrow everyone will see at the meeting |
|
| 08.05.2020 15:02 | # 16 |
| Guests |
|
|
I would gladly send it to everyone if anyone wants my special help to my brothers in the forum.
|
|
| 08.05.2020 15:02 | # 17 |
| BuRCaK |
|
|
I was really wondering if these sensors are not engaged in reverse gear. Do you know how to connect this event?
|
|
| 08.05.2020 15:02 | # 18 |
| Guests |
|
|
[QUOTE = BuRÇaK] let's say you put it on. Doesn't this sensor connect to reverse gear? I know it wrong? how do you do it? [/ QUOTE] There is no point in this sensor after it is not engaged in reverse gear that the sensor works when the shift is already in reverse gear There are 4 eyes http://www.bim.com.tr/aktuel-urunler/park-sensoru.html |
|
| 08.05.2020 15:02 | # 19 |
 MemoTech |
|
|
[QUOTE = BURÇaK] I really wondered if these sensors are not engaged in reverse gear. Do you know how to connect this event? [/ QUOTE] Cable is pulled from the reversing lamp.
|
|
| 08.05.2020 15:02 | # 20 |
| Ozgur |
|
|
yes you get electricity from the reversing lamp
|
|