![]() ![]() |
|
![]() |
Painting Shift Knob Top Cover .. |
• Homepage » PEUGEOT MODIFIED PLATFORM » General |
08.05.2020 14:08 | # 1 |
![]() |
|
![]() I decided to paint. Our material ![]()
We remove the coating that looks like chrome on the cover with a brush and clean the remaining area. We apply a coat of spray oil on top of the well cleaned cover.When we dry (we dry fast with the blow dryer), we apply the second layer of black paint, wait for about 10 minutes and pour our silver colored glitter with very small moves. pour easily .. ![]() To clean the glitter that fills in the numbers, we take a toothpick and dip it in the black paint, clean the inside of the numbers, and fill it with both paint and paint. Of course, we do the process precisely, not like using Hilti. ![]() After making sure that the paint is completely dry, we apply our spray varnish to our cover at a distance of approximately 25 cm.We keep the drying time as 3-4 hours so that our second coat varnish does not swell and our cover is like a glass coating.We do the varnishing process 5-6 layers. We wait at least 1 day after hitting it, so that a strong varnish is obtained against all kinds of external factors. ![]() TIP: You can fix it to the mouth of the water bottle of 0.5, so as not to hold the cap in hand.You can turn the mouth of the water bottle a few times with a notebook tape since the cover will be a little big, then you will sit tightly and you will be very comfortable doing your operations. ![]() Shift knob view after operations ![]() ![]() ![]() (I say this shift knob was like Bülent Ersoy's microphone ![]() ![]() |
08.05.2020 14:08 | # 2 |
![]() |
|
Thanks dear brother, it's nice ...
|
08.05.2020 14:08 | # 3 |
![]() |
|
A very good idea Can brother, health to your hands. |
08.05.2020 14:08 | # 4 |
![]() |
|
work well, looks good, health into your hands.
|
08.05.2020 14:08 | # 5 |
![]() |
|
My brother is very beautiful. Health into your arms. |
08.05.2020 14:08 | # 6 |
![]() |
|
aby can be a different application. cleverly amaaa is almost like bulent ersoyun microphone :)
|
08.05.2020 14:08 | # 7 |
![]() |
|
It is nice . I have the same problem with my chrome gear knob, but I am afraid when I take it off so that the complete gear will be in my hand :).
|
08.05.2020 14:08 | # 8 |
![]() |
|
Thank you for sharing your health and health.
|
08.05.2020 14:08 | # 9 |
![]() |
|
Nice work brother: D
|
08.05.2020 14:08 | # 10 |
![]() |
|
Health to your hands ...
|
08.05.2020 14:08 | # 11 |
![]() |
|
Really different, health in your hands.
|
08.05.2020 14:08 | # 12 |
![]() |
|
It is really nice ....
|
08.05.2020 14:08 | # 13 |
![]() |
|
Good work has been done. I don't know if it would be possible, but I was thinking about putting the LED inside the gear knob and lighting it ... |
08.05.2020 14:08 | # 14 |
![]() |
|
good health
|
08.05.2020 14:08 | # 15 |
![]() |
|
It is really nice, but it is a different situation: D
|
08.05.2020 14:08 | # 16 |
![]() |
|
It was a good idea. My car's numerator also came out, its teeth were broken. I bought it for 32 TL from the service ... (Of course, my opinion is not so good and useful) :) |
08.05.2020 14:08 | # 17 |
![]() |
|
Well, good idea is a bit of a mess but
|
08.05.2020 14:08 | # 18 |
![]() |
|
seriously that person's microphone is gb ![]() |
08.05.2020 14:08 | # 19 |
![]() |
|
Congratulations on your own work. |
08.05.2020 14:08 | # 20 |
![]() |
|
It is nice to pour such interesting ideas into action and open up your horizons in others health ...
|