LED stop application to 307 - 307

I do not like the products sold in the market in terms of both design and quality.

my goal is to stick to the original lines as much as possible

Designing my own stop lamp first for functionality and then for charm.

I provided a new safe stop lamp for this process.

I aim to acquire manual skills and experience on new stops by trying all kinds of works such as cutting, mowing, drilling etc. on this stob.

Designing an impressive array of LEDs on this case without sacrificing both functional and appearance was somewhat difficult.

I decided to use the led modules that I will buy as an oem out of the market.

I am thinking of the current stop passat led stop module.

Since these products are lifetime, they are both more cost-effective and more convenient to install.

at least there is a compatible circuit on it. I think that it will not cause any problems in time for many years or even the life of the vehicle.

with parking lamps on

when braking

when the signal is given

I didn't think of anything for reverse gear and fog right now.

I will share quite a lot of development in the future

now I bought 3 sets of modules from my friend.
I will use 2. I will use the other for trial purposes.
I tried to remove the experimental one from its slot by heating and cutting the utility knife.

thank you but it's not over yet

I couldn't sit down yet.

you have to cut it. I will handle it on a free day now.

parks will be this way. 36 LEDs are on, but they are a bit dark.

this time finished yaww

no, I'll buy a pair of taillights

very busy

Come on easy. Are these modules available in printers? and how much is the price? As if it would be nice for 206 stob,

You don't have practical intelligence and dexterity even in the Chinese. health into your hands.

:) :) brother one day let me take the car or let's get sole :) :)

Well, super. You are dealing with these kinds of processes.

friends, thank you for your feedback.

After that, I will make an indicator modification. it will be ok.

berko

Style 206 is similar to style 307.

If I can finish this job, you can benefit. you can travel faster.

at least you don't make the mistakes I made or will do.

of course, but I don't know how much it costs.

my friend was selling only one of this module for 100 TL.

The module has parking (20 leds), brake (16 leds) and signal (20 leds).

56 led module also regulated circuit etc .. all in one.

If you buy ready-made LEDs and make your circuit yourself, there will be more cost.

does not look beautiful either. Why do you say LEDs are actually reflectors.

It looks very small and one by one when not using the reflector. The reflector can show a led up to 7-8 leds.

what are you going to do to the indicator:) you are thinking of changing my light color?

I'll do this to the indicator.

I will remove the warning lamps between speed and speed completely and put a tft color screen in the same size.

I also want to communicate with the vehicle via OBD and remove the alerts such as digital speed, fuel information, sensor information, etc. from the same screen.

peugeot logo may also appear at the opening.

it totally depends on my imagination.

I am close to this kind of work because of my job or profession

[QUOTE = individual] I will do this to the display.

I will remove the warning lamps between speed and speed completely and put a tft color screen in the same size.

I also want to communicate with the vehicle via OBD and remove the alerts such as digital speed, fuel information, sensor information, etc. from the same screen.

peugeot logo may also appear at the opening.

it totally depends on my imagination.

I am close to this kind of work because of my job or profession

[/ QUOTE] would be great

For example, for example, a nice mobile phone screen would be among the indicators (308 premium pack type or 308 auto6R).

peugeot logo on boot

When the petrol light comes on, the large pump sign and the sound of the sound, digital speed, etc., which light up periodically at 1 minute intervals ... briefly what the obd device can give me is important

If you can do the things you mentioned on the indicator, I will leave my job and come to congratulate you. You need to put a processor to operate that mobile phone screen and process the information you receive. You have to make a feed circuit for the processor to work. If you do, I will come to you to study

It may take some time

I will start immediately when the led stops are over

I think it will be super in me.

08.05.2020 14:11	# 3
Onur
good health

08.05.2020 14:11	# 6
Onur
this time finished yaww

08.05.2020 14:11	# 9
H-a-d-i
You don't have practical intelligence and dexterity even in the Chinese. health into your hands.

08.05.2020 14:11	# 10
Guests
:) :) brother one day let me take the car or let's get sole :) :)

08.05.2020 14:11	# 11
Murat
Well, super. You are dealing with these kinds of processes.

	LED stop application to 307
• Homepage » PEUGEOT MODIFIED PLATFORM » 307

08.05.2020 14:11	# 1
individual
I do not like the products sold in the market in terms of both design and quality. my goal is to stick to the original lines as much as possible Designing my own stop lamp first for functionality and then for charm. I provided a new safe stop lamp for this process. I aim to acquire manual skills and experience on new stops by trying all kinds of works such as cutting, mowing, drilling etc. on this stob. Designing an impressive array of LEDs on this case without sacrificing both functional and appearance was somewhat difficult. I decided to use the led modules that I will buy as an oem out of the market. I am thinking of the current stop passat led stop module. Since these products are lifetime, they are both more cost-effective and more convenient to install. at least there is a compatible circuit on it. I think that it will not cause any problems in time for many years or even the life of the vehicle. with parking lamps on when braking when the signal is given I didn't think of anything for reverse gear and fog right now. I will share quite a lot of development in the future

08.05.2020 14:11	# 5
individual
I couldn't sit down yet. you have to cut it. I will handle it on a free day now. parks will be this way. 36 LEDs are on, but they are a bit dark.

08.05.2020 14:11	# 7
individual
no, I'll buy a pair of taillights very busy

08.05.2020 14:11	# 12
individual
friends, thank you for your feedback. After that, I will make an indicator modification. it will be ok. berko Style 206 is similar to style 307. If I can finish this job, you can benefit. you can travel faster. at least you don't make the mistakes I made or will do. of course, but I don't know how much it costs. my friend was selling only one of this module for 100 TL. The module has parking (20 leds), brake (16 leds) and signal (20 leds). 56 led module also regulated circuit etc .. all in one. If you buy ready-made LEDs and make your circuit yourself, there will be more cost. does not look beautiful either. Why do you say LEDs are actually reflectors. It looks very small and one by one when not using the reflector. The reflector can show a led up to 7-8 leds.

08.05.2020 14:11	# 13
yzt06
what are you going to do to the indicator:) you are thinking of changing my light color?

08.05.2020 14:11	# 14
individual
I'll do this to the indicator. I will remove the warning lamps between speed and speed completely and put a tft color screen in the same size. I also want to communicate with the vehicle via OBD and remove the alerts such as digital speed, fuel information, sensor information, etc. from the same screen. peugeot logo may also appear at the opening. it totally depends on my imagination. I am close to this kind of work because of my job or profession

08.05.2020 14:11	# 15
Onur
[QUOTE = individual] I will do this to the display. I will remove the warning lamps between speed and speed completely and put a tft color screen in the same size. I also want to communicate with the vehicle via OBD and remove the alerts such as digital speed, fuel information, sensor information, etc. from the same screen. peugeot logo may also appear at the opening. it totally depends on my imagination. I am close to this kind of work because of my job or profession [/ QUOTE] would be great

08.05.2020 14:11	# 16
individual
For example, for example, a nice mobile phone screen would be among the indicators (308 premium pack type or 308 auto6R). peugeot logo on boot When the petrol light comes on, the large pump sign and the sound of the sound, digital speed, etc., which light up periodically at 1 minute intervals ... briefly what the obd device can give me is important

08.05.2020 14:11	# 17
Haci
If you can do the things you mentioned on the indicator, I will leave my job and come to congratulate you. You need to put a processor to operate that mobile phone screen and process the information you receive. You have to make a feed circuit for the processor to work. If you do, I will come to you to study

08.05.2020 14:11	# 18
individual
It may take some time I will start immediately when the led stops are over