Peugeot Forums - Peugeot Fan Club

I put on the armrest

Homepage » PEUGEOT MODIFIED PLATFORM » How To
08.05.2020 15:59 # 1
Guests


There are 2 more pictures, but I think they detected the site I uploaded from the company, they were banned.

According to its price, I think it is a perfect product. I think the hinge of the single flaw cover can be replaced by a slightly weak room.

For those who have a question mark on their heads, I think it is nice to think that this is stupid.I think it is very nice. The width is 13-14 cm.
huseyinturk 2011-08-12 21:34:57
08.05.2020 15:59 # 2
Guests
How did you assemble it?
08.05.2020 15:59 # 3
Guests
I think it is closing.
08.05.2020 15:59 # 4
Guests
It looks like it will be comfortable for 307.Airbag button closes, but I have different projects in my mind.
08.05.2020 15:59 # 5
Guests

If you pay attention, the backrest arm is on the outside of your vehicle, but the backrest arm of the 206's is between the seat. I thought it could prevent that arm ...

Good luck, use gule gule ...
08.05.2020 15:59 # 6
Guests
[QUOTE = cecol of]

If you pay attention, the backrest arm is on the outside of your vehicle, but the backrest arm of the 206's is between the seat. I thought it could prevent that arm ...

Good luck, use gule gule ...
[/ QUOTE]

Thank you brother. It may be a little bit squeezing, but the distance remains.
huseyinturk 2011-08-12 14:23:39
08.05.2020 15:59 # 7
Guests
[QUOTE = cecol of]

If you pay attention, the backrest arm is on the outside of your vehicle, but the backrest arm of the 206's is between the seat. I thought it could prevent that arm ...

Good luck, use gule gule ...
[/ QUOTE]

cem brother I think we should take this hand ... Sırıtma but that sounds a little big to us ??
08.05.2020 15:59 # 8
Guests
[QUOTE = HuseyinTurk] [QUOTE = CeCoLi]

If you pay attention, the backrest arm is on the outside of your vehicle, but the backrest arm of the 206's is between the seat. I thought it could prevent that arm ...

Good luck, use gule gule ...
[/ QUOTE]

Thank you brother. It may be a little bit squeezing, but the distance remains.
[/ QUOTE]
Do you know how wide the vehicle is from 206 ??? Let it stay 3-4 cm. Sırıtma Also, there is no backrest arm in your vehicle. The arms are in 206 and the seats are closer ...
08.05.2020 15:59 # 9
Guests
Let those who are brothers get 206 then buy and buy 307 :)
08.05.2020 15:59 # 10
EmRe26
Instead of selling the car, if we give max 50tl and get a suitable armrest?: D
08.05.2020 15:59 # 11
Guests
[QUOTE = EmRe26] If we give max 50TL instead of selling the car and buy the appropriate armrest?: D [/ QUOTE]
Could you measure the distance between your backrest arms if my beautiful brother is possible ???
But look carefully, I'm not saying between the seats. I want the distance between the arms we lay down on the back ... Because the arm will go between those arms ...
08.05.2020 15:59 # 12
Guests
It makes sense, brother does not fit us :)
08.05.2020 15:59 # 13
EmRe26
[QUOTE = CeCoLi] [QUOTE = EmRe26] instead of selling the car, if we give max 50tl and get the appropriate armrest?: D [/ QUOTE]
Could you measure the distance between your backrest arms if my beautiful brother is possible ???
But look carefully, I'm not saying between the seats. I want the distance between the arms we lay down on the back ... Because the arm will go between those arms ...
[/ QUOTE]

brother, of course the vehicle is not ewde now i can say 5 gbi



08.05.2020 15:59 # 14
metin
I did not see the painter opening.
I want to remove the original armrests very badly, but since the seat is attached from the side, the hole will remain.
There are original middle armrests, it is inserted into the pocket-like space between the airbag button and the handbrake.
I am very afraid that it will break when I put my arm on the originals
08.05.2020 15:59 # 15
Guests
Yes, my text is better than this arm ...
08.05.2020 15:59 # 16
Guests
It is very nice, but where can we get this original, I wonder how much is the price?
08.05.2020 15:59 # 17
Guests
http://www.sahibinden.com/ilan/vasita-aksesuar-tuning-otomobil-arazi-araci-armster-peugeot-307-01-orjinal-kol-dayama-kolcak-siyah-53721402/detay/?

Isn't this the picture that the Text shares?
08.05.2020 15:59 # 18
Guests
[QUOTE = HuseyinTurk] http://www.sahibinden.com/ilan/vasita-aksesuar-tuning-otomobil-arazi-araci-armster-peugeot-307-01-orjinal-kol-dayama-kolcak-siyah-53721402/detay /?

Isn't this the picture that the Text shares?
[/ QUOTE]
No, it's not what the text shows. We knew armster arm ...
If you don't find what the text shows, Göz Kırpma
08.05.2020 15:59 # 19
metin
cem brother now finds. I searched for help right now, I could not find less than 95 TL. But I remember very well, it was sold to a figure of 50-55 TL.
60 TL if the link is correct. it is even cheaper. it is enough to be just like the one I showed the bottom side. It sits "cuk" in the space on the other side of the airbag button.
I couldn't see the bottom of it, but it is talking about what I said because it says no cutting and mowing.
buddha painter.
Peugeot 307 Kol Dayama Kolçak--Gri renk
The ledge at the bottom is important.
08.05.2020 15:59 # 20
Guests
[QUOTE = text] finds cem brother. I searched for help right now, I could not find less than 95 TL. But I remember very well, it was sold to a figure of 50-55 TL.
60 TL if the link is correct. it is even cheaper. it is enough to be just like the one I showed the bottom side. It sits "cuk" in the space on the other side of the airbag button.
I couldn't see the bottom of it, but it is talking about what I said because it says no cutting and mowing.
buddha painter.
Peugeot 307 Kol Dayama Kolçak--Gri renk
The ledge at the bottom is important.
[/ QUOTE]

Text;
Brother If I Want To Find This Knife, It Is Very Affordable In Price ...

Page : / 3
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”