Peugeot Forums - Peugeot Fan Club

How to activate the pioneer joystick

Homepage » PEUGEOT MODIFIED PLATFORM » 307
08.05.2020 18:58 # 1
emresensoy307
Friends yesterday we changed the thermostat of my vehicle at the authorized service, but after changing the thermostat, we could not heat the car and realized that the control panel's temperature adjustment button was broken, we realized that the wire in the back was broken, and the electrician pushed the bottom console, we gathered the wire, then picked up the ten panel, but when I got out of service, the tape was gone, I went to the service. and there is no problem with the fuses. I inserted the connector socket on the back, I tried to plug it in. I did not check the joystick because it worked, I came home and looked again.
08.05.2020 18:58 # 2
emresensoy307
guncel
08.05.2020 18:58 # 3
emresensoy307
Friends, please help
08.05.2020 18:58 # 4
Alicilik
Did your joystick ever affect the pioneer tape?

08.05.2020 18:58 # 5
emresensoy307
Yes, I had it made in Izmir, I took out the tape socket and the tactics went from the arm control. Could we have been reset because the socket was removed?
08.05.2020 18:58 # 6
Alicilik
There is a lack of contact with the cables because there is no reprogramming.
08.05.2020 18:58 # 7
emresensoy307
Then there may be a problem with the cables, there is nothing to do with the tape.
08.05.2020 18:58 # 8
emresensoy307
Well, if there is insurance on this arm, does anyone know how many?
08.05.2020 18:58 # 9
Viruse
[QUOTE = pug206emre] Friends, we changed the thermostat of my vehicle to the authorized service but when we changed the thermostad, we could not heat the inside of the vehicle and realized that the control panel's temperature adjustment button was turned off, the electric wire was removed from the back of the wire, but we picked up the wire on the back panel. Then I went to the service, the electrician looked and there was no problem in the fuses, I inserted the connector socket in the back, I tried to plug it in the back, I did not check the control lever because I worked, I came home, I looked at it again, I could not have gone because it was working from the tape, I couldn't go from the tape pionner deh 4350 [/ QUOTE ]

Dude Although there are many cables on the control arm, the tape connection is made with an intermediate apparatus and it only enters the tape with a 3.5 "stereo jack. Look at the back of the tape. Is there a socket similar to the picture.


08.05.2020 18:58 # 10
emresensoy307
There is a socket, but when I removed the ten console, they injured him.
08.05.2020 18:58 # 11
Alicilik
There is no insurance, possibly someone on the link.
08.05.2020 18:58 # 12
emresensoy307
Exactly, I will go to the authorized service tomorrow and have a warning about how I know this day glass.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”