Helical steering liner

Merhana friends 206 my car's steering wheel was worn and black powders came to my hand. I bought a spiral artificial leather covering yesterday and I planted the steering wheel in 20 minutes and today it was a nice image. I can put it on the picture. If you think of the coating, I would recommend a nice application.

It is nice yes. I use it, it picks up the prick but it is very good according to the cost of the image, it is better than a slip-on case, at least. You can use the image uploading sites on it, or there is a button with a cross up arrow in the section where we write a message, at the top, you can go to the full editor mode and click on the add image section and upload.

hello can i have if there is a link i will do my lion :)

We couldn't do the following painting: (Zeytinburnu sumer mah. 18 street, there are accessories, I bought from there ..

Finally I was able to share :) Omer_mydnc 2016-02-22 20:58:14

The photo is not very clear, especially since it is not taken for the steering wheel, but this is mine.



samet206 2016-02-22 21:38:24

Good health to your hand. It is nice to keep in mind that there are cases that cover the complete steering wheel for the 206's. Gokcesel 2016-02-22 21:56:37

If you have not been mistaken about this product before, I said that I would not take it away from this product.

[QUOTE = samet206] If you have not been wrong about this before, I was not mistaken, I bought it from this product.
[/ QUOTE]

Samet, it looks pretty nice, the steering wheel is close to the original.

[QUOTE = Gokceel] Good health to your hand. It is nice to keep in mind that there are cases that cover the complete steering wheel for the 206's. [/ QUOTE]

I did it myself, I covered it completely in this way :) cost 1 lira :) yes you did not hear it wrong. Then I stitched it on the steering wheel for about two hours, like a spiral steering wheel cover.
I will also share a photo size tomorrow if I want to share photos, but the leather I bought was fine and very creeping. The measurement I took 120 cm decreased to 80 cm due to the creep. So there is no point in giving mold.

friends, I wrapped up in this sheath business. I bought it for 20tl ago, it was nice to try, but the material quality started to peel off in 5 months. the feeling was perfect, I will share your picture tomorrow, do not say I can not do it with you.

[QUOTE = talip206] I did it myself, so I covered it completely :) the cost is 1 lira :) yes you did not hear it wrong. Then I stitched it on the steering wheel for about two hours, like a spiral steering wheel cover.
I will also share a photo size tomorrow if I want to share photos, but the leather I bought was fine and very creeping. The measurement I took 120 cm decreased to 80 cm due to the creep. So there is no point in giving mold. [/ QUOTE]
Hodja, if you can take a photo, it would be great.

friends, I bought and sewed a month ago, the steering wheel gets a little thicker and looks nice.

When I bought the car I had the Coiled upholstered leather, the skin was too thick and it felt like a feeling.

Although my steering wheel does not have a risk of peeling, I bought the helical steering wheel cover. it was very good to grip.

Since it was very clean on my steering wheel, I covered it so that it was not worn out.

This is the steering wheel cover that I made with the leather I bought for 1 TL from the market I mentioned earlier. I sewed a red stitch because the outside and inside of the car are red. The leather is so thin and beautiful that even its presence is not felt. Actually, I did this to try and make molds, but it was nice. if i find it from the same skin i will try again soon. It is sold in the market for 10 20 TL, but I did this because they did not wrap the steering arms. In fact, it would be better if I made the part that was divided into arms instead of making parts, but as I said, I did it for trial purposes.