|
|
|
|
full speed |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 16:52 | # 1 |
 Cetinler |
|
|
2004 model 1.4 diesel 206 I have owned, I have been using it for a long time. I had no opportunity to try the last speed, but I just went to a highway that was available for speed before, but my car did not exceed 130, the landing on the straight road did not progress at the speed 130, when the speed came to 130. it does not increase, but the cycle is rising but it does not have a surate effect. I would appreciate it if friends who have knowledge about this help, thank everyone very much in advance.
|
|
| 08.05.2020 16:52 | # 2 |
 KenBlockJR |
|
|
If the speed is increasing, the speed does not increase, the pressure is over.
|
|
| 08.05.2020 16:52 | # 3 |
 bjkamil |
|
|
Does the speed increase but the speed does not increase in intermediate acceleration ?? so does the gear pretend idle ?? the problem is different only if it is also doing the last speed ..
|
|
| 08.05.2020 16:52 | # 4 |
| Cetinler |
|
|
there is no problem in intermediate accelerations, both torque and speed are not problem until 130. Only after 130 there is a problem, the speed is increasing, but the speed is not increasing.
|
|
| 08.05.2020 16:52 | # 5 |
 toga406 |
|
|
I think it can't seem to grow fuel
|
|
| 08.05.2020 16:52 | # 6 |
 loiz |
|
|
When I push it very hard with 1.4 diesel, I see 110 120 in 3rd gear. How does a car not go more than 130? Do you feel that the vehicle does not accelerate? It felt very unusual for me to feel the torque in intermediate gears and stop at 130
|
|
| 08.05.2020 16:52 | # 7 |
| Cetinler |
|
|
the problem is not on the display, I have a navigation device in my car, I compared my speed with it, the indicator is correct, when I press it, it sees 130 in 4th gear, and even if I keep on the throttle, the speed remains at 130 even though I have increased the speed when I shifted to 5th gear. it feels like pressure to me, but I guess I'm not the only one with this problem. Someone who has just started will give exact information :)
|
|
| 08.05.2020 16:52 | # 8 |
| Cetinler |
|
|
I wanted to keep the subject up to date, I would be glad if anyone with experience helps.
|
|
| 08.05.2020 16:52 | # 9 |
 feline |
|
|
the pressure is the pad is absolute try to go up to high speeds using revolutions at a time if it is not, some money is stuck
|
|