|
|
|
|
Finding Out? Do you also have industry? |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » All Questions About Your Vehicle | |
| 08.05.2020 20:17 | # 1 |
 Brcbyrktr |
|
|
In the picture below, a Park accident work ... I asked for two or two places they opened the door from 350 .. I said, let me take the zero industry side paint came to the same price. I said if I find the fender in the same color, if I find it? Does it cause any trouble later? legally.  |
|
| 08.05.2020 20:17 | # 2 |
 CemDemiral |
|
|
my brother take him to a good master they pull him down the bottom fender will be local at the bottom and remains the original as a piece
|
|
| 08.05.2020 20:17 | # 3 |
 Baran35 |
|
|
It looks like it will be resolved by pulling the chief, no need to change, just find the master :)
|
|
| 08.05.2020 20:17 | # 4 |
 KILIC |
|
|
I think it is vacuumed. Not so bad.
|
|
| 08.05.2020 20:17 | # 5 |
 sonerkyl |
|
|
no need for change
|
|
| 08.05.2020 20:17 | # 6 |
 hzr206 |
|
|
the old altay stadium in alsancak, you can continue from where you can get print prins lpg enter her street, find the painters alp master or ahmet master capper, find her shop if you say ahmet master, find it, hod, i would have helped if i were in izmir with good workmanship. you're done.
|
|
| 08.05.2020 20:17 | # 7 |
 samet206 |
|
|
Get past. First of all, the part that needs to be painted, the bodywork and paint will be made. I agree with a place that gives an affordable price. There is no need for adventures such as removing and disassembling for this damage. |
|
| 08.05.2020 20:17 | # 8 |
 aslanaft |
|
|
Get well, you can get on this car like this, but for this reason, the fender will not change.
|
|
| 08.05.2020 20:17 | # 9 |
 pusutr |
|
|
[QUOTE = aslanaft] Get past this car, you can get on this car, but because of this, the fender does not change, I would make a good master, Brother [/ QUOTE] When you say this car ?! 206 this is my brother 206 :) |
|
| 08.05.2020 20:17 | # 10 |
 Oktkor |
|
|
It takes away much worse. It will be vacuumed, worked a little finer, and hammered a little. If the paint is in a condition to be saved, it does not even need to paint. If it is not necessarily to be painted, I think it will be saved without paste.
|
|
| 08.05.2020 20:17 | # 11 |
| aslanaft |
|
|
[QUOTE = pusutr] [QUOTE = aslanaft] Get well, this car can be taken like this, but for this reason the fender does not change, make a good master, Brother [/ QUOTE] When you say this car ?! 206 this is my brother 206 :) [/ QUOTE] :) I say that the originalness of the car should not be spoiled, otherwise it is 206 valuable cars, of course.
|
|
| 08.05.2020 20:17 | # 12 |
| samet206 |
|
|
Friends, the paint is cracked. How to save from painting. If there is a small amount of paste, a polishing paste is passed. There is nothing else to do, to be shaved, to be pulled with a tailstock tool. |
|
| 08.05.2020 20:17 | # 13 |
 iammanover |
|
|
For a better buyer than the paint-eating change. As far as I can see, the paint does not throw away, it can be corrected by removing it and it feels like you can save the paste polish.
|
|
| 08.05.2020 20:17 | # 14 |
| Brcbyrktr |
|
|
Thank you all for your interest. Considering what he wrote, I will visit the master, who is my brother hzr206, at the first opportunity. |
|