Peugeot Forums - Peugeot Fan Club

Engine renewal

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 20:30 # 1
Kocamustafa
Hello there! Friends I have been using pejo 206 for 5 years but I just joined you. My problem is big 2006 model 1.4 gasoline 206 is there 2 days ago because of the engine, the engine is over.
08.05.2020 20:30 # 2
madblueblacksea
The two cars are just similar in type, so don't let this fool you. The front team rear team security brain gearbox axles are all different. If you have a lot of money, you can do it for adventure.
08.05.2020 20:30 # 3
Kocamustafa
Eyv I already realized that there was a wrong idea.
08.05.2020 20:30 # 4
acabuco
[QUOTE = Kocamustafa] I realized that there is a wrong idea already.

My brother is trying to shake the guy very comfortably, watch out, I recommend you to be careful with the people who have made bloody biceps while I renew the engine.
08.05.2020 20:30 # 5
madblueblacksea
[QUOTE = Kocamustafa] I realized that there is a wrong idea already.

I wish you spoke from the beginning. In the renovation, the parts to be changed, the workmanship to be made, and the extras that may appear, are certain. Let's say good
08.05.2020 20:30 # 6
KaBaDaYi
They haven't started the transactions yet, they will get an average price first, they will start after that.
08.05.2020 20:30 # 7
acabuco
[QUOTE = KaBaDaYi] They have not started the transactions first, they will set an average price first, they will start after that.


Until today, I had trouble with cars at every point with masters, always, without exception. Most of them make halal haram, they are the ones who eat the most haram.

The parts that will change are certain, do they accept to pay the parts? Even if they agree to bill, they can set up a fake bill. Don't forget that they will try to shake you. It is a crime to be a well-intentioned, polite, kind and polite person in our society. They glue the weak person immediately, so I always leave aside the kindness in such cases. be rude, I say to you as much as possible

Since they open the engine after this hour, they see you in your pocket, my advice as a rent a car dealer is to be careful, we put the engine, you will have us do it, or we will have to make conversations with them, etc.

Say which part they will buy, there will be an invoice, I want to go together to buy the parts, you have to stop when you press the car during the whole construction process, otherwise, 2 thousand TL process will be paid 5 thousand TL, and they will not even install a new one, they will have the old parts repaired and 500 600 TL. they will spend money and make a profit of 4 thousand TL. One gram of goodwill feed. acabuco 2017-08-14 00:57:54
08.05.2020 20:30 # 8
KaBaDaYi
There was an incident that I thought I might be lucky, my fiance's cousin had been doing top cover and renewal for years. I said that it will be next to the engine, I am at their mercy now, but I think it is a positive situation.
08.05.2020 20:30 # 9
acabuco
[QUOTE = KaBaDaYi] there was an event that I thought I might be lucky, my fiance's cousin had been doing the top cover and renewal process for years. Don't worry, he said that he would be next to the engine at every stage, but I am at their mercy, but I think it is a situation, as they say, build it on my own name.


This segment is paid for the whole process of throwing etc. etc. The purchase of parts is not done, as a cost. 1500 ideal.
08.05.2020 20:30 # 10
Kocak
[QUOTE = Kocamustafa] Hello! Friends I have been using pejo 206 for 5 years but I just joined you. My problem is big 2006 model 1.4 gasoline 206 is there 2 days ago because of the engine, the engine is over.

Hello

I Renewed The Engine Of My 206 Desire Vehicle That I Ride For 2004 Model 6 Years. New exiting the engine if you're going if you're of Ankara Traffic Branch Motor Criminal Investigation and soon wants a troubled process these applications in all yapılacakış turkey. If the parts inside the engine are out of use, it was my Ostim Yıldız We collected the industry with very clean parts. I spent a total amount of 3500 TL, of course, timing belts, recirculating water tank etc. etc. engine renewal or all of these


08.05.2020 20:30 # 11
KaBaDaYi
I did not go on a different engine adventure. With the help of friends, the engine was renewed, the shirts were bought and settled to zero, with the same parts in the top cover, I gave 900 lira to the parts required for this process, and I gave it to the engine refiner and top valve as a labor of 500 lira. When the shirt got into the business, it only took 500-600 workmanship to renew the engine, I gave it 500 lira including the top cover, I think it gave me a list of parts that lowers the engine and holds 900 lira in my master to reload the engine, but there was everything in the press brake pad tiriger etc I bought them and handed them over to the master today, I am waiting for the news that the engine will start, I did not give any craftsmanship money right now, and we did not talk about how much you would want to see. I have given 900 + 900 + 500 = 2300 bidet sucking maniforl is missing
08.05.2020 20:30 # 12
Kocak
I think the price is good, my brother, I changed it to catalyst or something. the master asked for 1500 lira we gave 1000 lira passed the room had a total of 3500
08.05.2020 20:30 # 13
KaBaDaYi
In my car, my brother has already canceled the catalyst before, this causes the car to burn very much and the engine is vibrating and I do not like it at all.
08.05.2020 20:30 # 14
Kocak
In the catalyst, I bought Ostim Yıldız from the clean empty hollow peugeot as a starter in the industry, to 170 TL. There are lots of parts in the star industry.
08.05.2020 20:30 # 15
karaca61
3500 materials 800tl workmanship 700tl turbo maintenance 200kur 500tl engine recruitment fees I have not received for a long time 5700tl in total I have the original list of 307 1.6 hdi 247km, I am the first owner of my vehicle, did I have trouble, did I have a hard time, did I have a hard time? karaca61 2017-08-23 13:07:54
08.05.2020 20:30 # 16
Kocak
Can you add my brother parts list or send mail?
08.05.2020 20:30 # 17
ALLEX
[QUOTE = karaca61] 3500 materials 800tl workmanship 700tl turbo maintenance 200com 500tl engine spare prices I have received a total of 5700tl of the original parts I have the original list I did not write for a long time 307 1.6 hdi 247km of my vehicle, I have made the first owner of my car, did I have a hard time, I got a hard time, I have a hard time, I have a hard time, I have a hard time with my car ]

last year the peugeot 1,4 hdi crate engine zero, turbo injectors, flywheel was 6750 TL.
For a moment it seemed more reasonable to disassemble the old engine + install the new engine + legal obligations but it would be more reasonable to reset the engine completely.

5700 TL is a very good number. I would have thought to give the car 3 thousand TL under the market and put 2000 on top of it. Wink
08.05.2020 20:30 # 18
ALLEX
now I have looked at the engine prices again.
Brother is talking about 11000 TL. Confused
Forget what I wrote above, the crate is about the engine. Cry
08.05.2020 20:30 # 19
x571
[QUOTE = acabuco] [QUOTE = Kocamustafa] I realized that there is already a wrong idea.

Brother, they are trying to shake the guy very comfortably, be careful, I recommend you to be careful with the people who have made bloody biceps while renovating the engine. [/ QUOTE]

why did you have a bloody knife
08.05.2020 20:30 # 20
Kocak
[QUOTE = ALLEX] now I have looked at the motor prices again.
Brother is talking about 11000 TL. Confused
Forget what I wrote above, the crate is about the engine. Cry
[/ QUOTE]

Flying Engine Prices
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”