|
|
|
|
engine is steaming |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 407 | |
| 08.05.2020 19:41 | # 1 |
 Baver Diyar |
|
|
First of all, I agree with you from Malatya. About a month ago, I bought a Peugeot 407 1.6hdi executive black car. When I bought the vehicle from Kahramanmaraş, I had an expert report while 75% of the engine output was at 189 thousand vehicles. When I returned to Malatya, 4 malfunctions appeared in the expert evaluation, I made them all, I changed the oil, water and filters on the bidet. After I bought the vehicle, I traveled 2 thousand km with the vehicle, there is no problem in the traction of my vehicle, but when I open the engine cover while the vehicle is running, it gives steam when I pull the dipstick and it gives a small amount of steam from there. Some masters say that the engine is exhausted, and some say it is okay to miss the normal oil. In short, the word is eating me. 1) If the motor is exhausted, how did the 75% motor in the Expert get out? 2) Is there a problem in the engine that gives steam? 3) Is there a vapor cutter engine product?
|
|
| 08.05.2020 19:41 | # 2 |
 xmen |
|
|
Hodja, do not break your spirits. If there is no problem in the vehicle, there is no problem. According to km status, it was the same when I bought it in my vehicle. It was the same when I sold it. Enjoyable rides
|
|
| 08.05.2020 19:41 | # 3 |
| Baver Diyar |
|
|
There is no problem in the engine traction, I am not someone who uses the car by compressing it, but I change the oil and filters at most 7-8 thousand km, but some masters say that the engine is over is depressing.
|
|
| 08.05.2020 19:41 | # 4 |
 usta307 |
|
|
My brother said that since the Peugeot vehicles were spontaneous in the forum, this was happening even in automobiles. It is a legend. There are more professional tests to find out the condition of the engine, which is not a problem. |
|
| 08.05.2020 19:41 | # 5 |
| Baver Diyar |
|
|
My brother has been 2 thousand km. I have checked the oil at least 3-4 times a week. As I said, there is no problem in the traction of the car, there is no abnormal condition in the engine, there is no oil reduction, the vehicle only gives steam.
|
|
| 08.05.2020 19:41 | # 6 |
| Baver Diyar |
|
|
If there are friends who have encountered such a situation in the 1.6hdi engine before, I am waiting for their comments.
|
|
| 08.05.2020 19:41 | # 7 |
 sonerkyl |
|
|
My teacher has nothing to worry about, if there is no oil or water shortage, if 500 ml of oil decreases at 8000 km, they say that the steam is coming out by the normal friends. They said that the service friend's car opened its lid on the 2015 jet and showed that many of these diesel vehicles would be blowing even if it was zero and it was quite normal. the engine is finished hocam paper clip constantly decreases oil, water decreases, there is a problem in traction, white smoke from the back throws continuously etc. If there is a problem. feel happy while using it
|
|
| 08.05.2020 19:41 | # 8 |
 hsnsnl |
|
|
Since the HDI engine is eccentric from the top, it throws steam from the oil cap (it shouldn't hurt when working). If the healthy control throws more steam from the oil stick, there is no problem. its food has changed .. by the way, good luck
|
|
| 08.05.2020 19:41 | # 9 |
| Baver Diyar |
|
|
There is a very small amount of steam delivery from the oil cube, the vehicle has been 2 thousand km.
|
|
| 08.05.2020 19:41 | # 10 |
 KILIC |
|
|
Peace of mind, enjoy the peace of mind by getting into your car. In addition, if the oil does not decrease in 2 thousand km, the masters who say that the engine is solid is the ones looking for chicken to be plucked.
|
|
| 08.05.2020 19:41 | # 11 |
| Baver Diyar |
|
|
Thank you very much for your comforting brothers. 
|
|
| 08.05.2020 19:41 | # 12 |
| pusutr |
|
|
I don't understand these mechanics. Sahin want to make a scratch even to zero cars with their expertise from the car (stay away from people like this) or just to introduce money into their pocket. |
|
| 08.05.2020 19:41 | # 13 |
 emrepunar |
|
|
my car came to my press, the engine oil plug was not fully installed, the oil was leaking from the small room, the engine was making smoke when the engine warmed up.
|
|
| 08.05.2020 19:41 | # 14 |
| ssakyel |
|
|
Hodja, have a compression test and be comfortable. Everyone says something about blowing. Depending on the model and age of the vehicle, it can sometimes be a problem. On time, we have been a customer of a ford fiesta 1.4 diesel vehicle. Anyway, we said, let's show it in the industry. Tl said if you take the expense. The seller was there too, of course he couldn't say anything. |
|
| 08.05.2020 19:41 | # 15 |
 Efe-Pojo |
|
|
There is no blowing in the overhead camshaft, if the oil cap is opened while the vehicle is running, steam comes and some pressure is felt. Whether there is a blowing of fiestan or not.
|
|
| 08.05.2020 19:41 | # 16 |
| ssakyel |
|
|
Especially if it has a dark blue color and a burning smell, it may be a problem for you. |
|
| 08.05.2020 19:41 | # 17 |
| selim38 |
|
|
If you want a watch https://www.youtube.com/watch?v=b2f0AwRJmp8.
|
|
| 08.05.2020 19:41 | # 18 |
| Baver Diyar |
|
|
I've watched this video before. In my car, I tested the oil cube there with no white oil, just like the man did, and tested it with white paper. Only the oil stick has very light white smoke, that is, steaming, but very light. There is steaming when you open the engine cover. There is no problem in the operation of the vehicle, there is no problem in the drive, the oil does not decrease the water, the black smoke does not emit black smoke from exhaust. The only problem is the white smoke when the engine cover is opened while it is running, and there is very little steam when it pulls the dipstick while it is still working. Waiting for the comments of my friends who have used hdi motor before
|
|