![]() ![]() |
|
![]() |
Engine failure go to service |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 508 |
08.05.2020 21:18 | # 1 |
![]() |
|
I have an active 508 active 2012.I have been using & nbsp; for about 2 months. / div> & nbsp; did not exist, but About 100-120 km I traveled to Sakarya & nbsp; go to the engine breakdown service warning. 5 km after the vehicle & nbsp; I took more and stopped in front of the house, stopped the vehicle fan & nbsp; continued to work 2 minutes later, I stopped the vehicle's & nbsp; ignition after salutation service post And the warning went off the fan turned off. & nbsp; There wasn't a hard ride during the trip, just at the crossroad junction & nbsp; div > gently, I got into the car hard, we jumped, press the brakes abs & nbsp; it went on, there was no problem while decam, this warning came on after 25 km. & nbsp; < div> Anyone who knows what the reason might be? & nbsp; Thank you. & nbsp; Also on the passing head up and start stop & nbsp; it was suggested that I disassemble the poles, I couldn't find any time 😔 Have a nice holiday everybody. I wish you a safe journey. & Nbsp; |
08.05.2020 21:18 | # 2 |
![]() |
|
diesel particulate filter fluid too low or exhausted. My 308 also came to my head 1 month ago, I filled the liquid and then they adjusted it with the computer.
|
08.05.2020 21:18 | # 3 |
![]() |
|
Did it become clear when connected to PC. Let me get one. Thank you very much.
|
08.05.2020 21:18 | # 4 |
![]() |
|
yes it exits the computer. Have a look
|
08.05.2020 21:18 | # 5 |
![]() |
|
thank you
|
08.05.2020 21:18 | # 6 |
![]() |
|
hello 508 particle filter plugging warning I connected the pc with the related tool 1 and 3 injector They said it was missing. Because of this, they said that this malfunction lamp was on. They cost around 2000 TL. In the vehicle I do not understand Is there no trouble in traction is this normal? Say what
|
08.05.2020 21:18 | # 7 |
![]() |
|
[QUOTE = Zafer54] hi 508 particle filter plugging warning I connected the pc with the related tool 1 and 3 injector They said it was missing. Because of this, they said that this malfunction lamp was on. They cost around 2000 TL. In the vehicle I do not understand Is there no trouble in traction is this normal? Say what [/ QUOTE] Observe your vehicle for a while. Will it give the same fault again?
|
08.05.2020 21:18 | # 8 |
![]() |
|
Hello friends I just joined your car, I have a problem in my car, I wonder if I have a 2012 model semi-automatic 208 owner, when my car is traveling 2 times a month, when I usually apply the brakes, the engine and transmission malfunctions go to work together, turn on the fault of the return system, it protects when the battery is installed and dismounted and it recovers when it comes to braking. I changed it, but after 1 week, I would appreciate it if there is anybody who knows that it gave the same malfunction again.
|