central lock problem

[QUOTE = HAR_teo] [QUOTE = CeCoLi] [QUOTE = HAR_teo] [QUOTE = ahmetsimiz] sole sample yield friends press the key only if the room is broken under the click button if the room gets broken during the lockup, the service will be offered again. open your controller, brush it out, help us with the help of kolanya or a little tiner, clean the electrochronic part beautifully. [/ QUOTE] I'll try it right away. Unfortunately this is not the problem because the top lamp flashes while driving with the doors closed. So the problem is at one of the gates, but which one is right there. though it is used like this, but sometimes it is very difficult to insert and lock the key in the door when the person has something and in the dark barrier: ([/ QUOTE] [/ QUOTE] antechamber. Now I came to my mind to figure out which lock is broken. I'll lock and try the individual doors. I guess let's look at the left back door. [/ QUOTE]

[QUOTE = CeCoLi] [QUOTE = HAR_teo] [QUOTE = CeCoLi] [QUOTE = HAR_teo] [QUOTE = ahmetsimiz] sole exemplary friends should only press the key under the lock button of the remote control, if the room is broken, the door is re-opened during lockout if the room is broken. I recommend the service, I want you to use your remote, open your brush, help us to help you to the kolaya or a little thinner, clean the elochronic part beautifully. [/ QUOTE] I'll try it right away. Unfortunately this is not the problem because the top lamp flashes while driving with the doors closed. So the problem is at one of the gates, but which one is right there. though it is used like this, but sometimes it is very difficult to insert and lock the key in the door when the person has something and in the dark barrier: ([/ QUOTE] [/ QUOTE] antechamber. Now I came to my mind to figure out which lock is broken. I'll lock and try the individual doors. I guess let's look at the left back door. [/ QUOTE] [/ QUOTE]

When my brother Har_teo leaves the back door open, the doors should be locked. There is no such feature in the back doors, I'm trying to rob him ... At least I am like that in my car. I would not argue that there might be a difference in yours ...

when i left the back door open i never saw it close I can't claim it because I might be wrong, brother. I will try and write

cem brother is the same as you did in your problem again This problem was on me right in the front door. We have seen that the same places have been hurt before, so it provides a certain period of time. not a permanent repair

[QUOTE = UGuRs] cem is the same as you did in your problem again This problem was on me right in the front door. We have seen that the same places have been hurt before, so it provides a certain period of time. not permanent repair [/ QUOTE]

[QUOTE = HAR_teo] I never found it closed when I left the back door open I can't claim it because I might be wrong, brother. try and write [/ QUOTE]

[QUOTE = CeCoLi] [QUOTE = HAR_teo] I did not find it closed when I left the back door open I can't claim it because I might be wrong, brother. try and write [/ QUOTE] [/ QUOTE] My friend CeCoLi just tried it a little while ago and I left one of the back doors open when I tried to lock it from the remote control, no door was locked ... there are differences between the models. Also, the doors were locked from the control, so I opened and closed all the doors a thousand times, but still locked. I think the problem is over if it is temporary But as I said, the ceiling lamp will blink and the doors will not be locked with a remote control in a small council.

Hello, I had the same problem. When I locked it with the key on the key, it opened instantly back. Occasionally it would crash without any problems. I have tried many things. The occasional locking made us think that there was no malfunction in the parts. (My problem was at the front door on the driver's side) For this reason, I tried to adjust the latch on the chassis side of the door. I lubricated the tongue of the door lock with VD40 style sprays and cleaned it in vain. It was getting very annoying. I got results with the method I did last. No problem for 2 days, other friends who have the same problem can try it. However, it is useful to remove the battery head in order to be safe while doing it. I share the details below. Responsibility belongs to the person who wants to deal with any negativity that may occur. First we remove the battery head. 2. Then we remove the plastic part that camouflages the connections of the rearview mirror. There is a torque wrench screw underneath. We take out. 3. We unscrew the torque wrench screw on the door handle. 4. We unscrew the torque wrench screw on the door trim. 5. We pull out the plastic part around the door opening part. 6. We free the door trim from the plastic parts that attach to the door. In this part, it is useful to do it calmly and carefully. Sensitive parts. They can break. We can do the disassembly process by squeezing and sliding our fingers between the door trim and the door. 7. At this stage, our door should be bare without a floor. 8. We loosen / remove the door lock mechanism with 3 torque wrench screws on the side of the door facing the central pillar. 9. Then we remove the plastic jack end from the cable connection point on the door lock mechanism. 10. If the battery is connected, we can check whether the doors are locked with the key. If it is locked, we confirm that our problem is correct. 11. The plastic jack we removed is a 6 pin female jack for my tool. (2007 model 206 1.4HDi Fever) 12. We bring the needles of this female jack - it should be plastic - with the help of a tool so that the teeth of the locking mechanism on the side where we attach the jack are jammed. Be careful, do not combine completely. Only the distance will be narrowed. 13. Then we assemble the jack and reverse the previous steps to restore our disassembled door. I hope it will be useful for you. Good forums.