Body paint, matt black foil coating .. - General

Friends, we continue our unfinished topic recently.

First of all, we prepare a suitable floor by removing the hood again and we put our top coat primer on our hood. After waiting for a while, we make sure that the paint is completely dry and we see that there are minor errors.

Before finishing the paint, we definitely apply the primer so that both our faults are certain and the paint should stick well. Finally, we put the paste in the areas where there is a wave as a final touch, and we sand it again with some thick sandpaper and then wet sandpaper. (I used 600 for thick, 1200 for wet)

And for the last time, we look at our top coat paint, I threw it on the paint myself, it is not a full professional pistol but it handles.We add suitable hardener (300 grams of paint 150 grams of hardener) and cellulosic thinner to prepare the paint. And let's apply the paint to the process .. I applied thin and far 5 times with 20 minutes apart from each other.

Anyway, we wear our hood early in the morning the next day, even if it is not completely dry. The next day, of course, sanding ..

There was no orange in the paint, but we get it done by sanding it from thick to thin, and then we finish it by finishing the cake and polish event ... We have an idea and finally, my friend has a little bit of foil coating experience and finally we got our hood by giving 15 ytl from the advertiser. We start with 1.5 meters of foil :)

When we first started, the job that seemed easy got harder, it made a few swellings, etc .. I was prepared by a friend from God and I brought the heat gun and I took care of those blouses and I wanted to share the work I started with good luck :)

I hope my friends will have an appropriate time, or do a nice bidet air filter kit for 106 xs ..

Walla rims have stood very dragged, are you a dragman :)) ahmet you know this job, you are in love, you are happy congratulations

but i am so hard to be friends :) :) :)

You have done good health with Ahmet, let's see the paint job for a while and see it closely.

congratulations. health into your hands. By the way, I think our site has won a new master.

foil coating also comes from my hand. zero error. and it's free.

good health Ahmetçim xs yano

Come on, let's see you sometime :)

ooo Ahmet maşallah health to your hands. Where should we come to your garage :))

A nice work .... Is there anyone who applies specially cut glass films for the car ...

We take film on the windows ourselves and take it ...

I wonder if he can ... Anybody have an idea?

[QUOTE = okan77] Nice work .... Is there anyone who applies the specially cut glass films between you ...

We take film on the windows ourselves and take it ...

I wonder if he can ... Anybody have an idea?

[/ QUOTE]

you have difficulty in applying such films, even if it is cut according to your vehicle, not just like covering a notebook or covering it with a hood, you need to work clean and understand how to remove a floor remover wick and use a heat gun.

foil is good for your hands

Thanks for your valuable comments, friends, I tried to do as much as I could, but I couldn't do it when I was looking at the pictures. But if I try to do this work again, it has been an experience for me. But there were some tiny air bubbles in the hood.

This is the first 2 days in front of the house as a garage and a shop entrusted at night :)

[QUOTE = HakanGokdemir] You have done good health with Ahmet's hand and let's see the paint job sometime. Let's see it closely. [/ QUOTE]

Sure, Hakan, why not?

[QUOTE = EmRaH] but it works a lot and friends :) :) :) [/ QUOTE]

Emrah you are right, I am interested in the car as long as it becomes clear that I have a discomfort about the car :)

My nurse, you are doing good work, congratulations, you have a beautiful hood.

[QUOTE = okan77] Nice work .... Is there anyone who applies the special cut glass films between you ...

We take film on the windows ourselves and take it ...

I wonder if he can ... Anybody have an idea?

[/ QUOTE]

no contamination. 100 TL everywhere now

They didn't say in vain: `` believing is half the success '' Gülme

It is very beautiful ..

Congratulations dear Ahmet, health for your efforts Gülme

photos eyukmuyo brother

08.05.2020 14:16	# 1
Carmania
Friends, we continue our unfinished topic recently. First of all, we prepare a suitable floor by removing the hood again and we put our top coat primer on our hood. After waiting for a while, we make sure that the paint is completely dry and we see that there are minor errors. Before finishing the paint, we definitely apply the primer so that both our faults are certain and the paint should stick well. Finally, we put the paste in the areas where there is a wave as a final touch, and we sand it again with some thick sandpaper and then wet sandpaper. (I used 600 for thick, 1200 for wet) And for the last time, we look at our top coat paint, I threw it on the paint myself, it is not a full professional pistol but it handles.We add suitable hardener (300 grams of paint 150 grams of hardener) and cellulosic thinner to prepare the paint. And let's apply the paint to the process .. I applied thin and far 5 times with 20 minutes apart from each other. Anyway, we wear our hood early in the morning the next day, even if it is not completely dry. The next day, of course, sanding .. There was no orange in the paint, but we get it done by sanding it from thick to thin, and then we finish it by finishing the cake and polish event ... We have an idea and finally, my friend has a little bit of foil coating experience and finally we got our hood by giving 15 ytl from the advertiser. We start with 1.5 meters of foil :) When we first started, the job that seemed easy got harder, it made a few swellings, etc .. I was prepared by a friend from God and I brought the heat gun and I took care of those blouses and I wanted to share the work I started with good luck :)

08.05.2020 14:16	# 2
Carmania
I hope my friends will have an appropriate time, or do a nice bidet air filter kit for 106 xs ..

08.05.2020 14:16	# 3
shamed
Walla rims have stood very dragged, are you a dragman :)) ahmet you know this job, you are in love, you are happy congratulations

08.05.2020 14:16	# 4
Guests
but i am so hard to be friends :) :) :)

08.05.2020 14:16	# 6
H-a-d-i
congratulations. health into your hands. By the way, I think our site has won a new master. foil coating also comes from my hand. zero error. and it's free.

	Body paint, matt black foil coating ..
• Homepage » PEUGEOT MODIFIED PLATFORM » General

08.05.2020 14:16	# 5
HakanGokdemir
You have done good health with Ahmet, let's see the paint job for a while and see it closely.

08.05.2020 14:16	# 9
MirakGTI
ooo Ahmet maşallah health to your hands. Where should we come to your garage :))

08.05.2020 14:16	# 10
okan77
A nice work .... Is there anyone who applies specially cut glass films for the car ... We take film on the windows ourselves and take it ... I wonder if he can ... Anybody have an idea?

08.05.2020 14:16	# 11
GokhaN
[QUOTE = okan77] Nice work .... Is there anyone who applies the specially cut glass films between you ... We take film on the windows ourselves and take it ... I wonder if he can ... Anybody have an idea? [/ QUOTE] you have difficulty in applying such films, even if it is cut according to your vehicle, not just like covering a notebook or covering it with a hood, you need to work clean and understand how to remove a floor remover wick and use a heat gun.

08.05.2020 14:16	# 13
Carmania
Thanks for your valuable comments, friends, I tried to do as much as I could, but I couldn't do it when I was looking at the pictures. But if I try to do this work again, it has been an experience for me. But there were some tiny air bubbles in the hood. This is the first 2 days in front of the house as a garage and a shop entrusted at night :)

08.05.2020 14:16	# 14
Carmania
[QUOTE = HakanGokdemir] You have done good health with Ahmet's hand and let's see the paint job sometime. Let's see it closely. [/ QUOTE] Sure, Hakan, why not?

08.05.2020 14:16	# 15
Carmania
[QUOTE = EmRaH] but it works a lot and friends :) :) :) [/ QUOTE] Emrah you are right, I am interested in the car as long as it becomes clear that I have a discomfort about the car :)

08.05.2020 14:16	# 16
oguzhan29
My nurse, you are doing good work, congratulations, you have a beautiful hood.

08.05.2020 14:16	# 17
H-a-d-i
[QUOTE = okan77] Nice work .... Is there anyone who applies the special cut glass films between you ... We take film on the windows ourselves and take it ... I wonder if he can ... Anybody have an idea? [/ QUOTE] no contamination. 100 TL everywhere now

08.05.2020 14:16	# 18
Can Duzyatan
They didn't say in vain: `` believing is half the success '' It is very beautiful .. Congratulations dear Ahmet, health for your efforts