|
|
|
|
aux input for vdo rd3 radio / cd player tape |
| • Homepage » PEUGEOT MODIFIED PLATFORM » Peugeot Sound Systems | |
| 08.05.2020 18:03 | # 61 |
 childrenofgrave |
|
|
Yes, I made the same circuit by compressing AUX cables to the existing CD Changer socket. So what is the purpose of the 1kohm resistance in the circuit?
|
|
| 08.05.2020 18:03 | # 62 |
 Teknikerim |
|
|
[QUOTE = I maximus] I tried this scheme on my own tape by soldering the cables, it didn't work, This can happen because CD Changer is closed. Socket of this scheme on the cable you bought from aliex will not work if cd changer is closed. CD changer can run on an open vehicle. CD changer feature is active, my teacher. i hope it will work
|
|
| 08.05.2020 18:03 | # 63 |
| Teknikerim |
|
 something like activating the line. I have no complete information. I thought I would cut the worst.
|
|
| 08.05.2020 18:03 | # 64 |
 sonerkyl |
|
|
If my teacher works, I will do it too. I am waiting with interest. 
|
|
| 08.05.2020 18:03 | # 65 |
| childrenofgrave |
|
|
[QUOTE = sonerkyl] I will do it if my teacher works. I am waiting with interest. [/ QUOTE] It will surely work; because I did it in the most primitive way, it worked. 
|
|
| 08.05.2020 18:03 | # 66 |
 maximusti |
|
|
If you like to mess with, get an old 8 pin socket from auto tapes, they probably won't want money. Get 1k resistance from television repairers, they don't want money for it either. start by soldering the pins of the socket by taking the aux cable (you can have the earphone cable of your old phones to cut it off, you can cut the hoperlor cable) :) I connected the cables to the tape, then I made a cable in this output to make it sound better, but the cd changer did not work because it is not active, I continue from the inside, I had an ipod of 160 gb, I started filling music, the sound quality is going well, for now.
|
|
| 08.05.2020 18:03 | # 67 |
| Teknikerim |
|
|
[QUOTE = sonerkyl] I will do it if my teacher works. I am waiting with interest. [/ QUOTE] If this works, I will do a different project. It will develop a little more. 
|
|
| 08.05.2020 18:03 | # 68 |
 OguzhanKucuk61 |
|
|
[QUOTE = My Technician] [QUOTE = sonerkyl] I will do it if my teacher works. I am waiting with interest. [/ QUOTE] If this works, I will do a different project. It will develop a little more. [/ QUOTE] of course we are following :) strange orj standing in the corner. back to tape possible :)
|
|
| 08.05.2020 18:03 | # 69 |
| Teknikerim |
|
|
Guys, I came with a cable, but I did not get any results. Tape Siemens VDO RD3-01 How did the running friend run the same tape? |
|
| 08.05.2020 18:03 | # 70 |
| sonerkyl |
|
|
cd changer feature is activated on the vehicle
|
|
| 08.05.2020 18:03 | # 71 |
| Teknikerim |
|
|
[QUOTE = sonerkyl] on the car with cd changer enabled [/ QUOTE] I know he is active, teacher. how can I learn?
|
|
| 08.05.2020 18:03 | # 72 |
| childrenofgrave |
|
|
[QUOTE = My Technician] [QUOTE = sonerkyl] on the car with cd changer enabled [/ QUOTE] I know he is active, teacher. how can I learn? [/ QUOTE] Do you have 5 CD changer available in your vehicle? It should have worked, if any. Otherwise, the feature needs to be activated. I have been using it for 3-4 weeks without any problems. |
|
| 08.05.2020 18:03 | # 73 |
| Teknikerim |
|
|
Currently there is no. But there is a cd changer button, no reaction to pressure
|
|
| 08.05.2020 18:03 | # 74 |
| childrenofgrave |
|
|
Okay here it is. If our vehicles do not have a fabricated CD changer, the special clip also comes off. You need to have it opened from the service or someone with the software.
|
|
| 08.05.2020 18:03 | # 75 |
| Teknikerim |
|
|
[QUOTE = childrenofgrave] Okay here it is. If our vehicles do not have a fabricated CD changer, the special clip also comes off. You have to open it from the service or someone with the software. [/ QUOTE] Ali was hungry when we met our friend. how did you run Will there be a CD in it? or will it switch to the key? Also what is your Tape model?
|
|
| 08.05.2020 18:03 | # 76 |
| childrenofgrave |
|
|
Mine is RB3. Cassette player model. If it was opened before, there may be a problem: It is switching to automatic radio again because there is no CD. Or he's not reacting at all when he presses the mode button. I already have an interlaced cd changer. I choose changeri at the first opening of the tape. If I choose one more radio, it doesn't return when I want to go back to cd changer. Because it detects that the changer is broken and stays on the radio.
|
|
| 08.05.2020 18:03 | # 77 |
| sonerkyl |
|
| 08.05.2020 18:03 | # 79 |
| sonerkyl |
|
|
I see, when I go to the forehead, let's try and see what the result will be on my tape.
|
|
| 08.05.2020 18:03 | # 80 |
 ancyra |
|
|
[QUOTE = I maximus] [QUOTE = I Technician] Hello sir I have been focusing on the same subject for about a week. and there are many products in aliexpress that fit that entry. As of yesterday, I ordered 1 piece. The apparatus can be used in many vehicles such as Mercedes BMV Sat VW (Max 2008 model) it is even used in marea in the fiat group. (They display AUX directly on the screen) that input unit is already standard. The product I bought is in the link below. I write here as soon as I try also some pictures and link I have sourced from; I tried this scheme on my own tape by soldering the cables, it didn't work, This can happen because CD Changer is closed. Socket of this scheme on the cable you bought from aliex will not work if cd changer is closed. CD changer can run on an open vehicle. I wonder if anyone can gain aux input to 206+ original tape (PU-2859a) with the link in the link? Tşkler. |
|