|
|
|
|
Armrest Suggestion For Partner |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » Partner | |
| 08.05.2020 14:01 | # 1 |
 Guests |
|
|
Also, the same craftsmen say to me that I cannot attach colored LEDs to the indicator. 2000 Model Peugeot Partner
|
|
| 08.05.2020 14:01 | # 2 |
| Guests |
|
|
If you are the first to open a dating barrier, it would be better for you and your forum .. welcome to us .. friends who are interested in the topic will help you .. wish you a pleasant forum |
|
| 08.05.2020 14:01 | # 3 |
 hasimayaz |
|
|
Seat-Mounted Armrest Making. I photographed the construction stages of the armrest that I made for my vehicle. The cost is 60 USD, including the material. Below are the production procedures and photos for friends who are not familiar with the subject. First of all, we remove the seat from the 4 torx screws and take it out. The floor part in the middle of the back is opened by releasing the tires, then we reach the iron poles by opening the floor in the back completely. The armrest mechanism is screwed in place by removing the support of the edge of the back. The armrest covered with fabric is attached to this mechanism and the necessary adjustment is made. And after all, we have a mobile armrest
|
|
| 08.05.2020 14:01 | # 4 |
 Emin |
|
|
First of all, welcome to us. We would like to get to know your vehicle. You can introduce yourself by opening a new topic from the link below. http://forum.peugeotturkey.com/forum_topics.asp?fıd=22 |
|
| 08.05.2020 14:01 | # 5 |
 sinan-s |
|
|
Welcome to the club
|
|
| 08.05.2020 14:01 | # 6 |
| Guests |
|
|
Mr. Haşim, first of all, thank you very much and all the questions in my mind have been answered. However, I was amazed by the interest I could not hide. Believe me such an interest, I liked it very much ... Emin and Emrah brothers created a topic in the meeting section. Thank you very much for your kind and concerned attitude. My brother Sinan, welcome :) Mr. Haşim Bey, do you know a reliable place where I can get this done in Ankara?
|
|
| 08.05.2020 14:01 | # 7 |
| Guests |
|
|
Thank you for your attention. Hajim bey `ankara! the most beautiful place will recommend to you. |
|
| 08.05.2020 14:01 | # 8 |
| Guests |
|
|
Thank you very much. |
|
| 08.05.2020 14:01 | # 9 |
| hasimayaz |
|
|
[QUOTE = erasersurvey] Dear Mr. Hasim, first of all, thank you very much and all the questions in my mind have been answered. However, I was amazed by the interest I could not hide. Believe me such an interest, I liked it very much ... Emin and Emrah brothers created a topic in the meeting section. Thank you very much for your kind and concerned attitude. My brother Sinan, welcome :) Mr. Haşim Bey, do you know a reliable place where I can get this done in Ankara? [/ QUOTE] You're welcome if I could help you The place I built was next to my bodybuilder friend, an upholster uncle. He made a car with my BMW and left very happy with his owner. An application that you can easily make in all upholsterers in the industry .. 20 YTL ready armrest, 2.5 ytl fabric, 40 YTL workmanship. There are only 2 types of cola, the first one is the ones that need to be welded to the seat iron and the other ones that can be screwed to the seat iron. My upholsterer recommended the screw so I bought it. It would be nice if you ask and inquire while you are making your choice. Another reminder is that when installing the mechanism, you will install it with grease. Otherwise, the metal mechanism may be destroyed quickly. The place that I have built is in the infallible industrial site. I took the map down below. The only upholsterer on that street, it won't be hard to find. He does not know me by name, but I have received advice from 206 of Arab friends, if you say you have the room built, he will do it for the same price.  |
|
| 08.05.2020 14:01 | # 10 |
| Guests |
|
|
Thank you very much, this place is very close to my house :) As soon as I receive the salary, I run 2 days left: D If you go to the sunken a little more, I have a neighbor exhausting brother TUNA Exhaust. It works not only in exhaust but in all kinds of narrow times because it is open at 9:00 pm at the latest in the markets. (All kinds of mishaps happen to me on Sunday :)) Believe me, you have described the armrest in my mind, and I understand that this system can be applied in the back ...
|
|
| 08.05.2020 14:01 | # 11 |
| hasimayaz |
|
|
[QUOTE = erasersurvey] Thank you very much here is very close to my house :) As soon as I receive the salary, I run 2 days left now: D If you go to the sunken a little more, I have a neighbor exhausting brother TUNA Exhaust. It works not only in exhaust but in all kinds of narrow times because it is open at 9:00 pm at the latest in the markets. (All kinds of mishaps happen to me on Sunday :)) Believe me, you have described the armrest in my mind, and I understand that this system can be applied in the back ... [/ QUOTE] We need a little more details for the rear seat .. steel belt or something boiling together. There is a cut of the sponge and a lot of workmanship. If you find the exit armrest and just replace the upholstery, it can come cheap.
|
|
| 08.05.2020 14:01 | # 12 |
| Guests |
|
|
Then only the front seats are enough to get you started :)
|
|
| 08.05.2020 14:01 | # 13 |
| hasimayaz |
|
|
[QUOTE = erasersurvey] Then only the front seats are enough for the start:) [/ QUOTE] In the front seats, if you want, you can apply 2 pieces (one thin in both ribs) .. or a medium size one, or a thick size (to cover the gap completely). The armrest that appears in the pictures is medium size. .. The big one stood very shapeless.
|
|
| 08.05.2020 14:01 | # 14 |
| Guests |
|
|
It will be healthier to practice on the spot, so thank you. Also, can not LEDs be attached to their indicators? |
|
| 08.05.2020 14:01 | # 15 |
| hasimayaz |
|
|
[QUOTE = erasersurvey] It will be healthier to practice on the spot, so thank you. Also, can not LEDs be attached to their indicators? [/ QUOTE] Typical bottomless bulbs are used in the indicators. The translucent floor used in the lighting of the instrument panel will be yellow in color, so whatever color light you give from the background will light up in the tone of the yellow. I tried it on the clock display and the center console Yellow + blue = purple color appeared.  |
|
