angel eyes headlight making (PICTURED)

It is certain that the vehicles are a modification that changes the appearance and aesthetics, and also adds a spirit to the vehicle.
Let's come to our project;

We will need to make angel eyes;
1- Our bar, which is the part of blinds curtains
2- 2 leds and preferably a resistance of 220ohm
3- A jar corresponding to 8mm diameter
4- one oven
5- electrical tape
6- cable


Our bar, which is the bracket of the blinds;





Since this bar is long, we cut it long enough.



We put this cut plastic bar in the oven and wait for it to soften to form a light shape;


Then, we wrap the stick coming out of the oven around a glass jar or other rounded material so that it takes shape.


Then we drill holes with 2 drills so that this plastic can enter the led lamps.



We insert LED lamps into the holes we make.


Then we connect the 2 ends of the led lamps to the + and - poles accordingly.




Then, we make scratches on the ring stick to create lines on this circle. You can use a drill or regular saws.


When the LED lamps we attach to the ends of this bar are powered, the image will be as follows.


QUOTATION

thank you very simple and beautiful application. I am thinking of making them out of red.

I was thinking, but I looked, I don't have any free time to try it .. today we went to the side of the album with the spoiler, we've gotten an entirely spoiler side marsier angel and ceiling covering :)) now we have connected the heat c. Take the facility to the garage. But I did not solve the heat of the water ring price comes high: D

nice work is very simple ..

It can also be made with silicon placed in the silicone gun. There is no need for baking.

[QUOTE = muratgulen07] nice work is very simple .. [/ QUOTE]

it looks like something very easy

I share it very nicely, but I don't have a car H4 brother, I think it is good for me: D good luck, I hope my brother will be more beautiful than you want :))

inslhhh ... Tesekkurler :)))) by the way I missed the forum beeee:) =))))

[QUOTE = Mesut] inslhhh ... Thank you :)))) by the way I missed the forum beeee:) =)))) [/ QUOTE]

I haven't seen a lie for a long time :)) When I ticked, I was going for two minutes and running away from the intensity: D but now we are here: DD

Don't worry, brother Mesut will be number 10
look you see

You wrote "a jar corresponding to the diameter of 8mm", but a ring is made from its cap. I think it should be 80mm.

Hacı Inan is an excerpt like I have written under the share I did not write. besides, my labor is only from copy paste and the deletion of the occasional lines: If there is an error in D, please forgive me meclis members :))))

[QUOTE = albaydemircan] Do n't worry Mesut brother will be number 10
look you see
[/ QUOTE]

Come on, I hope :))

vayyy cem my sister came :)))) welcome :))) thanks my brother: D

FRIENDS HAVE HAD IN MY MIND, THIS EVENT IS ONLY LIKE TO ORIGINAL ORIGINAL HEADLIGHTS, I WOULD LIKE TO INSTALL THESE MATERIALS, AND I CAN DO IT IN THE HEADSHIP, EVEN EVEN EVEN THAT I HAVE TO INSTALL IN THE HEADLIGHT. I HAVE RED 106 WAR IN YOURSELF WHICH DO I LOSE MY RED LEDS WHITE OR WHICH HAPPENS WHICH HAPPENS ???

street art 2011-02-23 10:29:18

we are welcome :)) we are here every day anyway :))) the cecol 2011-02-23 10:33:03

assembly heat is easy, actually the electricity from the parks, but the electrician makes it more profesional. I do not know if they will fit it too, but we will try and see it now: D Meanwhile, if the car is going to make the leds red, be careful that it is very sharp: DDd hit the eye as well: D