|
|
|
|
advance payment |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 20:01 | # 1 |
 dagdelen34 |
|
|
|
|
| 08.05.2020 20:01 | # 2 |
 ndiali |
|
|
no they don't do it themselves they do it through computer
|
|
| 08.05.2020 20:01 | # 3 |
 sonerkyl |
|
|
Just like our friend said, after cleansing, it is necessary to connect to the computer and make a cablibration.
|
|
| 08.05.2020 20:01 | # 4 |
| dagdelen34 |
|
|
So can every engine repairman do this?
|
|
| 08.05.2020 20:01 | # 5 |
 conywolker |
|
|
You can do it in 307 as follows; Turn off the ignition, let all the doors be closed, turn on the ignition press and hold the gas switch off the ignition, press the gas until km lights go out release the gas when the lights go out turn on the ignition, start the vehicle Normally, nothing should be mixed until the fan turns on, but since it is very difficult to open a fan in the air, let the car run at idle for about 2 3 minutes. calibration is ok. |
|