|
|
|
|
About 206 crankcase protection plates. |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 13:57 | # 1 |
 HakanGokdemir |
|
|
In the coming days, I will press the front part of the vehicle thoroughly and for this reason, I need protection sheet under the engine because the engine remains clean. I am thinking of doing it myself, if you can help me to get a picture from a sample sheet or a plastic one, I would appreciate it. Best regards; Hakan GÖKDEMİR
|
|
| 08.05.2020 13:57 | # 2 |
 MirakGTI |
|
|
If you do it yourself, it will be more expensive and you will get the hair and cut it with a laser, then you will have 1e1 holes etc. in the molder. The best thing is to do it in 20 minutes in the industry, as it will waste time + money.
|
|
| 08.05.2020 13:57 | # 3 |
 Guests |
|
|
I asked in service they said the metal one is 130 ytl for 307
|
|
| 08.05.2020 13:57 | # 4 |
| Guests |
|
|
I do not have time, my brother, Serhat Gorur, takes the vehicle to the ceker photo
|
|
| 08.05.2020 13:57 | # 5 |
| HakanGokdemir |
|
|
I will not give money to the metal sheet and workmanship. Mirak will only travel 50 km to get to the workplace, so I will spend 7-8 ytl autogas. 
|
|
| 08.05.2020 13:57 | # 6 |
| Guests |
|
|
My brother believes it is not worth doing it yourself, but if you come at the weekend, you will get the look of my car and there is not that much mess.
|
|
| 08.05.2020 13:57 | # 7 |
| HakanGokdemir |
|
|
[QUOTE = serhat_tutar] my brother is not worth making your own belief, but if you come at the weekend you will get the look of me from the car and there is not that much mess. [/ QUOTE] Thank you Serhat bro! I actually love to deal with it.
 |
|
| 08.05.2020 13:57 | # 8 |
| HakanGokdemir |
|
|
I met with Metin Oto, he said, take the measure, he said, if you want to get out, I will give it to 100 ytl hair.
|
|
| 08.05.2020 13:57 | # 9 |
| Guests |
|
|
zero 130 ytl already hakan brother 2. why do you give 100 ytl privates go to peugeot service ask you near there
|
|
| 08.05.2020 13:57 | # 10 |
| Guests |
|
|
[QUOTE = EmRaH] zero 130 ytl already hakan brother 2.hand why give 100 ytl privates go to peugeot service ask you near there [/ QUOTE] If you go to the private, call me from there 05323158210 or find Pandeli and say hi  |
|
| 08.05.2020 13:57 | # 11 |
| HakanGokdemir |
|
|
I have a friend in the early days, even I bought the car with him, I told him, if it comes broken, with the permission of Allah, he will set the room from the plastic one ...
|
|
| 08.05.2020 13:57 | # 12 |
| Guests |
|
|
In my own, the bottom guard was broken from the broken edge, said 130 ytl to the metal one.
|
|
| 08.05.2020 13:57 | # 13 |
| Guests |
|
|
Hakan, I only know the shape of the plastic and the sheet metal. I know if you want a confirmation.
|
|
| 08.05.2020 13:57 | # 14 |
| HakanGokdemir |
|
|
[QUOTE = DERAN_TUYNER] My lady only knows the shape of the plastic and the sheet metal differently. If you want a confirm [/ QUOTE] Okay Deran brother, I ask your friend
|
|
| 08.05.2020 13:57 | # 15 |
 tolgasena |
|
|
I have written plastic, I hope you are not serious about it ... there is only one hit point, my friend I would not recommend;)
|
|
| 08.05.2020 13:57 | # 16 |
| HakanGokdemir |
|
|
[QUOTE = tolgasena] you have written plastic, I hope you are not serious about it ... there is only one hit hit, my friend would not recommend;) [/ QUOTE] I will not buy both plastic or hair, since I will make it from sheet metal, plastic or sheet sample was needed for the guide, otherwise I will not buy plastic anyway
|
|
| 08.05.2020 13:57 | # 17 |
| Guests |
|
|
evt brother take plastic, take sheet in me, have a plastic plate
|
|