508 temperature and catalactic convector problem - 508

Hello friends, I have the 2011 508 1.6 called gasoline. My vehicle overheats after going 3 km, but after two hours of rest I can see another 3 km. The computer gives catalytic convector malfunction when I put it in private service in Fethiye

The master asked for a convector with a 1706z2 part code, but when I asked the printers, they said they didn't know the part number. My request from you, can you give me an idea? I have a limited budget, how can I solve this problem in the most economical way and how can I find the convector that I mentioned the part code of?

Note: The vehicle is located in Fethiye, in remote places such as parts and an bursa, and if you write problems, I will have problems in terms of both cargo and time.

Thanks...

First of all, welcome to us. If the temperature indicator is making a ceiling within 3 km, the sensor or thermostat may be defective. When the temperature is attic, check the radiator temperature, if it is cold, it is necessary to change the thermostat and sensor. There is a possibility of air in the system, hodja. Especially it is beneficial for you to have a peugeot knowing master even my bmw and mini models have the same engine, my teacher may be a good bmw master. Catalatic convector may not be faulty. it may also be caused by the fuel you take or injectors. You can call the company on the link and get a price.

https://www.peugeotmarket.com/

Thermostat has water leakage, production error, there is no water in the vehicle overheating (high risk of movement), you will get the updated current thermostat, it is renewed in the cable.

08.05.2020 21:00	# 1
Aydin kaya
Hello friends, I have the 2011 508 1.6 called gasoline. My vehicle overheats after going 3 km, but after two hours of rest I can see another 3 km. The computer gives catalytic convector malfunction when I put it in private service in Fethiye The master asked for a convector with a 1706z2 part code, but when I asked the printers, they said they didn't know the part number. My request from you, can you give me an idea? I have a limited budget, how can I solve this problem in the most economical way and how can I find the convector that I mentioned the part code of? Note: The vehicle is located in Fethiye, in remote places such as parts and an bursa, and if you write problems, I will have problems in terms of both cargo and time. Thanks...

08.05.2020 21:00	# 2
sonerkyl
First of all, welcome to us. If the temperature indicator is making a ceiling within 3 km, the sensor or thermostat may be defective. When the temperature is attic, check the radiator temperature, if it is cold, it is necessary to change the thermostat and sensor. There is a possibility of air in the system, hodja. Especially it is beneficial for you to have a peugeot knowing master even my bmw and mini models have the same engine, my teacher may be a good bmw master. Catalatic convector may not be faulty. it may also be caused by the fuel you take or injectors. You can call the company on the link and get a price. https://www.peugeotmarket.com/

08.05.2020 21:00	# 3
onurcapan06
Thermostat has water leakage, production error, there is no water in the vehicle overheating (high risk of movement), you will get the updated current thermostat, it is renewed in the cable.

	508 temperature and catalactic convector problem
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 508