Peugeot Forums - Peugeot Fan Club

508 front doors do not work keyless

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 508
08.05.2020 20:12 # 1
ozgurtc
Hello,
I own 508 THP.
It became known after the snow that the keyless function from the front door handles did not work,
Previously working forearms have become inoperable,
The left front door handle sometimes works if it hurt, The right front handle does not work at all,
I tried to disassemble the handle from the outside, but I could not get any results because the keyless cable remained inside.
I couldn't understand why the back arms worked like this, why it was like this.
I will start by removing the right front door trim, and the lights inside the right door will not light either, I will try two birds with a stone. I think the change in the right interior ambiance bulb was missing from the service mouth, which would be a separate subject :)
I'll try to remove contact cleanliness and contact spray or something.
I am a friend who makes transactions on a similar subject. First of all, I say 500 TL.
There is no place in Ankara that repairs Mercedes arms and specially silicones.
Another issue is that the famous back cover is running water at the opening, and I started working on that.

Stay healthy
Free

08.05.2020 20:12 # 2
fkundak
My free teacher, greetings,
I am a 2011 THP owner.
With the keyless opening of the doors. There are those who recommend that you disassemble and install the battery terminals. There are even those who say that the keyless entry starts working again when the battery is changed due to a different requirement. Hopefully this is also the case for you.

2. I do not think that the authorized services will help you much in terms of ambient lighting. Because the orange ambiance lighting around the door handles and gears in 2011 Allure packages was absent in the 2012s. In fact, when the people applied to the services with these complaints, they said that they came from the factory in France in this state because they could not supply the materials due to the tusamiami in Japan and they could not do anything. So it's up to you, but I think you can do it very well.

3. 60.70% problem is offered by methods such as suppository application for water in the trunk
08.05.2020 20:12 # 3
sonerkyl
First of all, welcome to us. Our member @fkundak has made the necessary explanations hocami, as you said, you can remove the inner door trim by yourself and clean the sockets to reach the solution.
08.05.2020 20:12 # 4
ozgurtc

Hello, when I took it to the service, they said that the arms will change without even connecting to the computer,

Anyway let's pass the story part ...

The front doors have the main sockets opened upwards, I removed the cips from here, I pulled the double-sided wd40 spray and reinstalled it, of course, do not pour it like water, wipe it a little, it does not affect immediately, the current needs to circulate for a day or two, the cable is solved now, both arms and right ambience lighting also works.

Dropping water from the other trunk is a structural problem, I put a D-profile insulating wick in between, but it is still dripping, so we will return it.



08.05.2020 20:12 # 5
ozgurtc
I think the removal of the door trim or the battery terminal moves are not necessary, this should be the first move. Do not risk unnecessary.
08.05.2020 20:12 # 6
sonerkyl
Thanks for the announcement, teacher. Do not enlarge the door trim so much in your eyes, I think after you have the necessary equipment.
08.05.2020 20:12 # 7
MARCOPASHA
[QUOTE = ozgurtc]

Hello, when I took it to the service, they said that the arms will change without even connecting to the computer,

Anyway let's pass the story part ...

The front doors have the main sockets opened upwards, I removed the cips from here, I pulled the double-sided wd40 spray and reinstalled it, of course, do not pour it like water, wipe it a little, it does not affect immediately, the current needs to circulate for a day or two, the cable is solved now, both arms and right ambience lighting also works.

Dropping water from the other trunk is a structural problem, I put a D-profile insulating wick in between, but it is still dripping, so we will return it.



[/ QUOTE]

Can you put the photos of the Sockets you mentioned directly or send a private message
MARCOPASH to 2017-03-21 16:35:01
08.05.2020 20:12 # 8
Ygz
I have the same problem, I went from cleaning to cleaning. Can you describe the clips in more detail?
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”