5008 DRIVER WINDOW CONTROL PROBLEM - 5008

Hello,

My 2010 model peugeot 5008 has an unresolved problem, if you can give an idea, it would be greatly appreciated.

1-Only the driver's window can be opened and closed from the driver's window controls, other windows cannot be opened and closed from the driver's remote.

2-Other 3 windows are also it can be opened and closed from the remote control in its own door.

3-Lexia device shows the commands given for all windows from the driver's control, there is no key contact problem, < /span>

manual and automatic opening and closing commands of all four windows are seen in the remote test in lexia as follows.

< /div>

4-In the function test of the glasses in Lexia, all four glasses do not move, it gives the following error for all four glasses,

but each window can be opened and closed with its own key.

5- In case the windows are left open , when I press and hold the close button of the vehicle's key control, the windows do not close, they used to close.

6- There are the following errors in BSI, there was no problem with the license plate bulbs, I removed the short circuit bulbs for the license plate light, I deleted the error again, these errors do not go away, I know that there is no headlight washer in my vehicle .

As I can see the signals of the control keys in lexia, I think there may be a problem with a relay on the bsi, is there a separate relay for the windows?

Also The following statement in the booklet caught my attention, my vehicle is in this exact situation. I wonder if there is a relay that provides this functionality and it's broken

If you can give an idea, I would be very grateful if you could guide me.

06.09.2022 12:20	# 1
oklit
Hello, My 2010 model peugeot 5008 has an unresolved problem, if you can give an idea, it would be greatly appreciated. 1-Only the driver's window can be opened and closed from the driver's window controls, other windows cannot be opened and closed from the driver's remote. 2-Other 3 windows are also it can be opened and closed from the remote control in its own door. 3-Lexia device shows the commands given for all windows from the driver's control, there is no key contact problem, < /span> manual and automatic opening and closing commands of all four windows are seen in the remote test in lexia as follows. < /div> 4-In the function test of the glasses in Lexia, all four glasses do not move, it gives the following error for all four glasses, but each window can be opened and closed with its own key. 5- In case the windows are left open , when I press and hold the close button of the vehicle's key control, the windows do not close, they used to close. 6- There are the following errors in BSI, there was no problem with the license plate bulbs, I removed the short circuit bulbs for the license plate light, I deleted the error again, these errors do not go away, I know that there is no headlight washer in my vehicle . As I can see the signals of the control keys in lexia, I think there may be a problem with a relay on the bsi, is there a separate relay for the windows? Also The following statement in the booklet caught my attention, my vehicle is in this exact situation. I wonder if there is a relay that provides this functionality and it's broken If you can give an idea, I would be very grateful if you could guide me.

	5008 DRIVER WINDOW CONTROL PROBLEM
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 5008