Peugeot Forums - Peugeot Fan Club

407 Tremors

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 407
08.05.2020 14:16 # 1
saw50
It is almost 1.5 qy since we bought our 407 brand vehicle, the vehicle is at 3500 km but there is a situation in the vehicle that caught my attention. I stand in the light, when it turns green, it pulls my foot off the brake, it makes such a slight flickering, then it stops, it lasts for 1 second, and the vehicle presses the brake lightly while going slowly, the speed is about 10 km. This is a normal situation. Sorry about the temper of the vehicles
08.05.2020 14:16 # 2
can32
Was it diesel in the vehicle you used before ????
08.05.2020 14:16 # 3
saw50
yes both of them are turbo diesel
08.05.2020 14:16 # 4
can32
When I switched to a diesel that looked like my mind, I asked him if he was a die-hard question. In other words, it was making a very slight flickering on departure. If there is a tremor in the size of a malfunction, maybe there may be a problem with the pressure pad. My 307 and 7000km of the press brake had changed to a fabricated error. they made from guarantee. If it is very uncomfortable, I will show it to the service when it is guaranteed.
08.05.2020 14:16 # 5
saw50
No, not so much, but I will follow a little more. The car has been attracting my attention since the first day.
08.05.2020 14:16 # 6
can32
you can request to use a test tool, you have the same thing compare to it. maybe it will help you decide.
08.05.2020 14:16 # 7
saw50
yes it may be, but i guess the peers of diesel cars in this peugeot. It doesn't bother anyway, but when there is no passat, I put it on a bit: D
08.05.2020 14:16 # 8
can32
I was using 1.6 hdi 407 in the company, there was a little bit of it, I gave it now I use 1.6 hdi c5 again, it has the same amount, everything is the same in their engine. Maybe it could be all of them as you said. I hope you have the first and last problem, you will not deal with the services. I think there is no problem, do not worry. good driving. The vehicle GT LINE I guess die at the bottom, enjoy 163hp: D
08.05.2020 14:16 # 9
saw50
yeah you say right it's better not to wear it. yes thank you for sharing gt line information: D
08.05.2020 14:16 # 10
Guests
Hello friends, I have a similar problem when I lift my car in 1st gear, if I do not press the accelerator pedal, the car trembles but when I press the gas a little, this tremor stops, I showed the car to the mechanic. I need to lift my gas a little more
08.05.2020 14:16 # 11
BAHTIYAR

it would be in my old ford car while it was still a little too early to dump the gear vibration normal vehicle with very little gas or idling is a harmful situation car top cover etc oil throws oil from places where there is oil + there is another extension related to the pistons as much as I remember. Is it shaking what he is doing?

08.05.2020 14:16 # 12
saw50
I guess the diesel models of the automatic peugeot will get up with this gas.
08.05.2020 14:16 # 13
IsmailAtes
This tremor is considered to be a normal situation. It does the same in 307 of me. I am using it in this way because I did not turn the flywheel after changing the pad. I do not think it will come out in the future.
I say not to wear it and get up as cycled as possible.
08.05.2020 14:16 # 14
Guests
my vehicle's flywheel was not double-sprung repair
08.05.2020 14:16 # 15
sdurmus61
I think these are all the same as normal, but when I lift the car without pressing the gas, of course, there will be tremor in the car, I say, do not enlarge them.
08.05.2020 14:16 # 16
saw50
yes you say right, thank you for your comments guys
Mobile App
Pejo Turkiye Forum, ready on your phone
Follow new replies faster, browse the forum more comfortably, and stay connected to the Peugeot community from the mobile app.
App StoreGoogle Play
Peugeot Forums - Peugeot Fan Club © 2026
“The most auspicious of people, it is people who are useful.”