407 pressure pads - 407 - Peugeot Forum

Hello. 2006 1.6hdi 407 print pad of my car is at the end point. They gave 450 TL price for original printing linings etc. at cost 250 workmanship. However, it is said that the flywheel should change in some places. If the flywheel fails again, is it because it will give 250 more labor or will it be finished? There are also cheap clutch flywheel sets on the internet, for example, the whole set is around 550 TL. Are there any users who are satisfied or shouldn't we use a brand other than sachs or valeo? I would appreciate it if anyone has information.
Meanwhile, they said 650 flywheel. Merttarıkahy to 2018-01-12 20:36:29

In the flywheel, either change it or if it saves it, I have lost two pressures due to the fact that the lathe in my car says that the master will feel cold and handle it.

I just changed

The movable flywheel and the pressure pad compatible with it are originally attached. They remove the compatible flywheel and the pressure pad from the vehicle's chassis number,

I got the moving flywheel and clutch set = 1.200 TL

They said that the fixed flywheel presses the clutch continuously, they did not recommend it, but the pedal has gone a little in the tremor.

bought the parts from peugeotmarket.ten? And what did the labor cost cost?

08.05.2020 20:43	# 1
Merttarikahya
Hello. 2006 1.6hdi 407 print pad of my car is at the end point. They gave 450 TL price for original printing linings etc. at cost 250 workmanship. However, it is said that the flywheel should change in some places. If the flywheel fails again, is it because it will give 250 more labor or will it be finished? There are also cheap clutch flywheel sets on the internet, for example, the whole set is around 550 TL. Are there any users who are satisfied or shouldn't we use a brand other than sachs or valeo? I would appreciate it if anyone has information. Meanwhile, they said 650 flywheel. Merttarıkahy to 2018-01-12 20:36:29

08.05.2020 20:43	# 2
onlycihan
In the flywheel, either change it or if it saves it, I have lost two pressures due to the fact that the lathe in my car says that the master will feel cold and handle it.

08.05.2020 20:43	# 3
JOEBLACK
I just changed The movable flywheel and the pressure pad compatible with it are originally attached. They remove the compatible flywheel and the pressure pad from the vehicle's chassis number, I got the moving flywheel and clutch set = 1.200 TL They said that the fixed flywheel presses the clutch continuously, they did not recommend it, but the pedal has gone a little in the tremor.

	407 pressure pads
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 407

08.05.2020 20:43	# 4
keqir
bought the parts from peugeotmarket.ten? And what did the labor cost cost?