407 electronic problems - 407

Hello everyone.

After traveling for about 1.5 years with different brand vehicles, I joined the peugeot family again by taking 407 for the sake of my 307's longest and most enjoyable. And I am very happy to be a peugeot driver again. 307 was like a rose, where I endured some small thorns. Unfortunately, there are some similar thorns in my 407 :) I would be pleased if you share your ideas about some of my electronics-intensive problems.

Unfortunately, the road computer screen in 307 goes dark under the sun and in the heat, unfortunately there is also a problem in 407. However, although the computer exchange for 307 is around 500TL, I found screens from 401 to 200TL on the internet. It was stated in the advertisements that the coding was completed and it could only be used by assembling, but I could not trust it. Besides, I did not want to deal with the introduction process in the service. I would like to get the ideas of friends who try and do similar applications.

My car is 2007 model 1.6hdi comfort package. Although it is a sub-package, there are some features that I have not seen in the hardware lists (such as headlight, rain sensor) or even my friend's rear window curtain which is not in the 2008 executive case :) But the equipment I desire most is cruise control. He said he can install a service, but if I take the lever myself to reduce the cost a bit, can I activate it in any service with PP2000? When buying the arm, is there any difference according to the chassis number or are all the arms in the market compatible?

When I first bought the car, there are places to say that the headlights did not illuminate at all. I also changed the bulbs, it didn't have much effect. Afterwards, I noticed that there was a film on the windshield and completely removed it. I can say that the night vision has improved relatively well, but still it looked as if the lenses seemed a bit misted. Is it normal to look slightly misted (for the first time I get into a vehicle with a lens headlight) or do I need to have it cleaned? In addition, is it possible to remove only the lens without removing the headlight or opening the window?

Again, as a chronic peugeot problem, the driver's side is only getting off with a few attempts, even though the glass goes smoothly. If I remove it with the first click, it's okay, but I can't get it up in auto mode. Every time I press it, the 2-cm interval is intermittent in Auto mode. Is it from the control knob or a deeper problem? . Likewise, when I try to close my right rear window completely, it comes to an end and halves again. (It protects it with a safety sensor, as if there is an object in front of it) I checked the wicks to see if there is a jam or something, but it seems clean. I took it to a master who did glass work. I have to deal with it for 1 day, he said, I will remove the entire door and look at the jack engine or something It sounded a little like an exaggeration, but what are your ideas?

Can I disassemble it myself if I find the ones with chrome strips in the executive package for door protection bars and bumper almonds or will the body shop handle it?

I apologize if I took your precious time with a little long questions. Thanks in advance to everyone who comments and shares ideas. Among Sayıg

08.05.2020 19:24	# 1
Oaytekin
Hello everyone. After traveling for about 1.5 years with different brand vehicles, I joined the peugeot family again by taking 407 for the sake of my 307's longest and most enjoyable. And I am very happy to be a peugeot driver again. 307 was like a rose, where I endured some small thorns. Unfortunately, there are some similar thorns in my 407 :) I would be pleased if you share your ideas about some of my electronics-intensive problems. Unfortunately, the road computer screen in 307 goes dark under the sun and in the heat, unfortunately there is also a problem in 407. However, although the computer exchange for 307 is around 500TL, I found screens from 401 to 200TL on the internet. It was stated in the advertisements that the coding was completed and it could only be used by assembling, but I could not trust it. Besides, I did not want to deal with the introduction process in the service. I would like to get the ideas of friends who try and do similar applications. My car is 2007 model 1.6hdi comfort package. Although it is a sub-package, there are some features that I have not seen in the hardware lists (such as headlight, rain sensor) or even my friend's rear window curtain which is not in the 2008 executive case :) But the equipment I desire most is cruise control. He said he can install a service, but if I take the lever myself to reduce the cost a bit, can I activate it in any service with PP2000? When buying the arm, is there any difference according to the chassis number or are all the arms in the market compatible? When I first bought the car, there are places to say that the headlights did not illuminate at all. I also changed the bulbs, it didn't have much effect. Afterwards, I noticed that there was a film on the windshield and completely removed it. I can say that the night vision has improved relatively well, but still it looked as if the lenses seemed a bit misted. Is it normal to look slightly misted (for the first time I get into a vehicle with a lens headlight) or do I need to have it cleaned? In addition, is it possible to remove only the lens without removing the headlight or opening the window? Again, as a chronic peugeot problem, the driver's side is only getting off with a few attempts, even though the glass goes smoothly. If I remove it with the first click, it's okay, but I can't get it up in auto mode. Every time I press it, the 2-cm interval is intermittent in Auto mode. Is it from the control knob or a deeper problem? . Likewise, when I try to close my right rear window completely, it comes to an end and halves again. (It protects it with a safety sensor, as if there is an object in front of it) I checked the wicks to see if there is a jam or something, but it seems clean. I took it to a master who did glass work. I have to deal with it for 1 day, he said, I will remove the entire door and look at the jack engine or something It sounded a little like an exaggeration, but what are your ideas? Can I disassemble it myself if I find the ones with chrome strips in the executive package for door protection bars and bumper almonds or will the body shop handle it? I apologize if I took your precious time with a little long questions. Thanks in advance to everyone who comments and shares ideas. Among Sayıg

08.05.2020 19:24	# 2
atomik07
Well, there will be a lot of mind around the brother, but if the ready car market is getting better, you can dispose of the car and find the 2007 executive model at a price of 1-2 thousand liras. Nothing like the original ..

08.05.2020 19:24	# 3
noscream
First of all, you can install any screen that is said to be compatible in the market, the screen is sold from very affordable foreign sites, you can look at the comments and get it (I say that I have never experienced this screen problem, it is very interesting, that is, I do not think it is chronic) There are companies in the industry that perform the headlight cleaning. They are doing! If we come to the windows, I heard from you for the first time. This malfunction may be due to many reasons, such as usage error or even wrong cleaning etc. It may take time to find! If we come to chrome laths, I replaced the car with chrome laths as soon as I bought it in 2007, it was nice, it changes to 20 lira, but if you say I can install it, you can install it, it seems like it is a bit difficult to remember the bumpers. I was so scared I had broken!

	407 electronic problems
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 407