407 Compenent Application

Hello friends...
I have shared the pictures below, and I can say that we will capture the perfect picture and sound.

In the compenent application, I bought 2 sets of sony xs 1622s series. I have 60 watts rms input. I fed it with 4x60 watts rms with kenwood m846 model amp. I used the speaker output of the original unit ... perfect fit excellent quality ...

Respects....

Hello, first of all, your product selections are good, I really find the amp very successful. I think the back 407 would be 13 all the way 16 If you put the stomachs of Kenwood you would get a more toned voice. You pierced the front doors for the tweeter. If only you had opened the subject before drilling, you could have put it under the front tweeter, distributing the crossovers behind the tape. You turned it from the high input output of the amplifier. If you used a converter like Audison Sli 2 or Sli4, the sound would be better in terms of quality. Or any converter can be audio or forwell mayehike. But above all, you loved the quality, there is nothing more. Pleasant listening. If you put Kenwood into a box of bass, the bidet will be super in the trunk :) Regards ...

hello i have 407 in the site and unfortunately there are not 407 in the site so it is not possible to exchange more information about 407. I want to beautify my car with small touches such as sound system rim tire and xenon, but I do not dare. I would also like to see if your car has full photos ...

Well, I have 407 and I'm trying to find the original trunk. What am I going to do?

Good looking congratulations

The installation of health tweeters in your hand is amazing.

companant confirm my linklano amphibia which is more productive i wonder :)

[QUOTE = BerkeKarayel] Hello first, good luck, your product selections are really good, I find the amp very successful. I think the back 407 would be 13 all the way 16 If you put the stomachs of Kenwood you would get a more toned voice. You pierced the front doors for the tweeter. If only you had opened the subject before drilling, you could have put it under the front tweeter, distributing the crossovers behind the tape. You turned it from the high input output of the amplifier. If you used a converter like Audison Sli 2 or Sli4, the sound would be better in terms of quality. Or any converter can be audio or forwell mayehike. But above all, you loved the quality, there is nothing more. Pleasant listening. Kenwood can be superb in the trunk if you put a box of bass :) Regards ... [/ QUOTE]


Sir, thank you for your interest. I tried a lot to catch quality in my car. But it never happened. Limited to what we can do with the original unit. If you followed a lot of topics before, this was the most perfect for 407. Because I have many amps, bass, 6x9, mid team, double din unit, deck converters etc. in my hand ... From the pioneer to jbl, until the kicker arrives. But since you do not have the chance to change the main unit of the 407, you can use the current sound in this way best ... Even if you measure with the avometer, you do not have the chance to adjust the trimpot settings of the deck converters you mentioned. I tried many brands and varieties, nevertheless. But since it is in High level input Nafi, it works smoothly and rms db pressure is equivalent. The front and back mid suits do not have 16.5 differences. The same measure in both. You said Kenwood brand, but I didn't want to break the team. I also pierced the front doors for tiller because the originals on the front chest have pioneer ts-20 ... Even when the sound is at the max level, the distortion rate is not felt even in the ears ... I recommend for 407s ... Regards ...

[QUOTE = mistercasper] hello i have 407 and unfortunately there is not a lot of 407 on the site so it is not possible to exchange more information about 407. I want to beautify my car with small touches such as sound system rim tire and xenon, but I do not dare. I would also like to see if your car has full photos ... [/ QUOTE]

I try to help as much as I know about 407. But I heard that the xenon application is said to be a problem in the 407s and nobody recommends it. You can also look at the full photos of the vehicle under the name mu car ... Regards

[QUOTE = Moondust] Well, I have 407 and I'm trying to find the original trunk. What can I do with a find? [/ QUOTE]

I hope you find it ... Regards ...

[QUOTE = 307bursa] Have fun listening nice [/ QUOTE]


Thank you...

[QUOTE = Burak] Looks good congratulations and pleasant listening
[/ QUOTE]

Thank you...

[QUOTE = Buyer] Your health tweeters are awesome to install.
[/ QUOTE]

Thank you...

[QUOTE = s.seckin] my companants confirm my link, which is more efficient :) I wish you good luck with this tool:) bye:) [/ QUOTE]

Thank you ... I hooked up the amphitheater. But it is not necessary to connect an amphitheater to the provinces. You can also use the tape output. But when the tape output is low, it will not be able to feed the compenents sufficiently, and after a level, distortion will occur in the sound.

[QUOTE = BerkeKarayel] Hello first, good luck, your product selections are really good, I find the amp very successful. I think the back 407 would be 13 all the way 16 If you put the stomachs of Kenwood you would get a more toned voice. You pierced the front doors for the tweeter. If only you had opened the subject before drilling, you could have put it under the front tweeter, distributing the crossovers behind the tape. You turned it from the high input output of the amplifier. If you used a converter like Audison Sli 2 or Sli4, the sound would be better in terms of quality. Or any converter can be audio or forwell mayehike. But above all, you loved the quality, there is nothing more. Pleasant listening. Kenwood can be superb in the trunk if you put a box of bass :) Regards ... [/ QUOTE]


You can also look here.

I http://forum.peugeotturkey.com/forum_posts.asp?tıd=28036&title=sonunda-bas Feyribas 2014-01-06 01:00:15

Use good health and good workmanship tweter in a nice place.

[QUOTE = Feyribas] [QUOTE = s.seckin] my companants affiliate linklano amphibia which one is more efficient :) good luck with this tool use goodbye:) [/ QUOTE]

Thank you ... I hooked up the amphitheater. But it is not necessary to connect an amphitheater to the provinces. You can also use the tape output. But when the tape output is low, it will not be able to adequately feed the compenents, and after a level, distortion will occur in the sound ... [/ QUOTE]