407 "brake pads worn" warning

We changed the front brake pads when the right front Z-rod was changing in my vehicle. He started to give "Brake pads worn" warning when there was no fault and fault code before. disappears for a short time. But then it burns again. The cause may be the problem. Lining sensors have also changed.

Wow look at the front sensor there may be a problem while flowing.

I have seen some pad cleaning sprays surprise the sensor, if you know your pad is not exhausted, try cleaning the pad around again with a lean spray ...

This sensor has a very simple arrangement. It is connected by a socket and has two cables. It was severely broken from one of these possible cables.

CHANGED WITH CABLES WITH CABLES. I DO NOT THINK THAT THERE IS A PROBLEM WITH CABLES. BECAUSE I REMOVED WHETHER AGAIN WHICH RETURNED.

I found the problem. There is a problem with the cable coming out of the pad. I removed the cable and the fault warning disappeared.

[QUOTE = king43] I found the problem. There is a problem with the cable coming out of the pad. I removed the cable and the fault warning disappeared. [/ QUOTE]

So what I said. There is probably a crack in that cable.

It came out exactly as you said.