407 2.0 hdi

Hello friends. I have a 2006 407 2.0 drive. When I stop the car from the steering hydraulic reservoir, it ruptures and spills the oil. The reason may be. A master said the cover is faulty. There may be a problem with another master steering pump. I need your information. Thanks Gokhan d. 2018-02-14 11:33:36

The cover may be faulty, but this is the first time I hear the hydraulics foam.

I guess the cover is really defective and the hydraulic oil is a liquid that keeps water.

I know that it will foam when the water mixes with the oil, but for this engine ... I even saw it in one of my friends' car recently, the bottom of the oil cap was like the tahini you know, after all it went and changed the cover gasket ... rain water washing water etc. it may be confused ... I think this can only be leaking from the cover ...

Normally, there is a hole in the cover when it stops, it breaks from there. It also ruptures when the cover is open. I'll try a cover and oil change. Thanks

the hose of the pump will change and the friend has to check the hoses first, the same problem was there because there was a place to escape.

There is nothing to do with the cover, and the oil is above the maximum, leave the door open, start the vehicle, turn the steering wheel right, wait a little, then do the same on the other side, repeat how many times, repeat it, then close the lid, you get the air in the first models. there is absolutely no problem in the pump

Hello, what is the full name of my hydraulic hose, I have the same problem, I will change the oil and hose.

Did the master tell you that the parts you said were defective? If not, do not look for parts yourself. The electric steering pump or steering box is broken.