![]() ![]() |
|
![]() |
407 1.6 hdı flap problem |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 407 |
08.05.2020 17:26 | # 1 |
![]() |
|
& nbsp; & nbsp; div> & nbsp; div> & nbsp; div>
|
08.05.2020 17:26 | # 2 |
![]() |
|
Teacher, I have the same problem on the left side, there is no problem on the left side, but we cannot adjust for the right side. I am waiting for your pictures :)
|
08.05.2020 17:26 | # 3 |
![]() |
|
It would be a nice sharing, the same problem was in caravel, they made 400 TL last month.
|
08.05.2020 17:26 | # 4 |
![]() |
|
that flap has a repair kit in the service. original. but 1000. 2000 tl shouldn't keep it. I'm also curious. |
08.05.2020 17:26 | # 5 |
![]() |
|
I'm thinking of uploading pictures today, friends is really annoying and troublesome work, but after solving the problem, the person is relieved. & nbsp; & nbsp; I need to peel the torpedo for those who do not know the location before uploading the pictures. After inserting the torpedo, there is a small steering engine in the left corner of the torpedo. You must insert it first. After you insert it, start your car and increase the temperature. div>
|
08.05.2020 17:26 | # 6 |
![]() |
|
friends can you clarify how to upload pictures
|
08.05.2020 17:26 | # 7 |
![]() |
|
Hello I Tayfun from Balıkesir. Classic problems of 407s; The problem of hot weather due to the first operation and stop (fixed flywheel output), signal arm distortion and plug-in due to movable flywheel. The service here asked for 800tl. I gave 100 lira. God bless. & Nbsp;
|
08.05.2020 17:26 | # 8 |
![]() |
|
Updated .. friends how to load yaw pictures and wait for the pictures ..
|
08.05.2020 17:26 | # 9 |
![]() |
|
[QUOTE = hsnsnl] up to date .. friends how to load yaw pictures and wait for the pictures .. [/ QUOTE] http://forum.peugeotturkey.com/forum_posts.asp?TID=22927&FID=52&PR=3& ; title = photobucket site-image-ykleme- Reviews |
08.05.2020 17:26 | # 10 |
![]() |
|
friends, I'm throwing the pictures, if you have questions, I will answer
|
08.05.2020 17:26 | # 11 |
![]() |
|
08.05.2020 17:26 | # 12 |
![]() |
|
Hodja, if I thought you would take the cover of the heart by breaking 2 places (3rd picture), wouldn't it be enough to break a single place :) How can we understand if there is a malfunction in the blade engine?
|
08.05.2020 17:26 | # 13 |
![]() |
|
Master, if you know the malfunction in the engine, if your car is running, increase or decrease the temperature while the engine is running or if the part at the end freezes, there is no problem in the engine, but if it does not move, the engine may have gone or it may not come electrically. p> |
08.05.2020 17:26 | # 14 |
![]() |
|
We opened a single hole and tried it without inserting the flap. The first time and the next day, it broke down in the cold weather. We completely fixed the flap in our pictures by inserting the flap.
|
08.05.2020 17:26 | # 15 |
![]() |
|
congratulations, good job
|
08.05.2020 17:26 | # 16 |
![]() |
|
[QUOTE = cerci07] congratulations you did a good job [/ QUOTE] Thank you very much we tried a little but it was stronger than the original, if we have a friend who wants to try it, it will break the flap without removing it, if you fix the motor small but very strong adhesive, we will fix it like we did. you will not have a problem |
08.05.2020 17:26 | # 17 |
![]() |
|
My 407 also had similar problems. The left flap is broken. The left side of the air conditioner was cooling only. The right side was working as set. I took it to a private peugeot service in Ankara. They repaired it for 400 TL. But all the money was for the console to be completely removed and reinstalled. There were a few broken dislocations during the disassembly. The way of repairing the part was very simple. They glued the broken piece with a blue-green double blend adhesive. I said put on the new valve. They tried it too, but they couldn't wear it. They said that we could break the boiler by breaking it, it would be worse at that time. & Nbsp;
After sticking the pieces, they sprayed a lubricant spray so that the flap would not stick to the edges. It looked like rust remover. But the smell did not pass for 2 months and it was tortured to operate the air conditioner. Due to the fact that the flaps are in the middle of the area under the console, which can not be reached from anywhere without dismantling the entire console. & Nbsp; It has been about 6 months since repair. It looks fine for now. & Nbsp; Get back to what happened to you. & Nbsp; |
08.05.2020 17:26 | # 18 |
![]() |
|
Friends, I found the forum and member while dealing with this problem. Also, it can be reached under the steering wheel and turned manually, and if anyone knows about this issue, it is very acceptable. Regards ..
|
08.05.2020 17:26 | # 19 |
![]() |
|
Which service did you have, teacher |