406 idling and stopping problem - 406

I HAVE SLM 2001 MODEL 406 SV BVA GASOLINE + LPG CAR .. I HAVE I HAVE A BRC LPG KIT AT 78000KM ... I CAN'T FIND A SOLUTION TO THESE .. I WAIT FOR YOUR AID .. MY VEHICLE IS AT 86000KM NOW ...

My teacher, I know you from another club ... welcome to you first ... you know the forum rules. you must introduce yourself in a detailed way, right? :)))

yes i read the rules ... i will be more careful ... i remember you too ... by the way what happened to that site ...

[QUOTE = taskinbudakk] yes i read the rules ... i will be more careful ... i remember you too ... what happened to that site by the way ... [/ QUOTE]

bosver duh that heat ... :)) this place is much more alive and solid. I think there was a problem in your vehicle before. I remember it like cozmustun vs but did it break down afterwards ???

yes this problem has existed since i bought the car ... i show it to the master clean the idler engine and the parts around it (wd40 squeezing) ... the car is 10-15 days normal then the same ... i go again says the master is doing from lpg .. i go to brc He says he should get used to lpg .... I go back after 5000 km. Brc to the LPG settings how it says in normal gas .. I use the car in the gas again the same problem continues ... anyway I don't stretch too much ... I'm tired of going to the industry..but my problem still continues ... the car is the same as the normal day 3, the same day ... stop at the lights, idle navigation ... disgrace the man ... I washed my car on Tuesday, I opened the air in the beautiful windows, I was waiting in the open lights a little in the sound of the radio ... once stopped, all my charisma was drawn ... they're talking from the car next to me ... pejo is normal ... i'm bored now on this problem ... please help ...

Hello there. Perhaps you have tried this far enough so far. Let me tell you a few things, maybe a hint comes out of the line.
Does any malfunction light come on when your vehicle stops?
Oneri do:
1. Check if the EGR valve is obstructed. The obstructed EGR valve causes the local vacuum to leak and your vehicle will stop idling. In your vehicle, the EGR valve is on the right rear of the engine. Follow the silver colored pipe coming out of the intake manifold and it is connected to a part at the back. This connected part is EGR. It is a little difficult to access, but it can be done when you try. Holds 2 8 mm bolts. Maybe there is an extra clamp for the cables. Try to blow it out. You can clean it with pads or debris sprays. Also check that the valve is on the axis of the shaft inside.

The part you are looking for is in the picture below:

2. This is what I usually call the malfunction light. If it is burning, it is useful to test it. There are 2 sensors. One is the camshaft sensor and the other is the crankshaft sensor. It is a good idea to replace both of them. If you can at least test it, have it tested.

These are what I will say. I hope that will be useful.

no, there is no light that is lit except for the engine malfunction light .. my engine malfunction light is constantly on ... they extinguish in the service but after 1-2 days it turns on again .. when i ask they say there is nothing important because they are from lpg ... I have to go to another master from my mind but There is nowhere I know ..

what is the fault of the machine when you go to the service for the malfunction heat ????????

I never asked him ... I'm looking for a master in Ankara ... he will solve my problem ...

it didn't happen: (((

If the fault light is on, it is necessary to know the reason. anyway it gives error ???

I don't think it will do my fuel mixture in gasoline. I will say this is because of the big chance lpg. But if there is another problem, it can do so. you say you are already doing ...

your friends in Ankara will tell you a master or a service who knows the heat ...

If the engine malfunction light is on, the water is called to the sounds I call. At least you're sure. Healthier comments can be made if you get the errors they see when they connect your car to the computer, or better still the error codes.
Regardless, we would be very happy if you share the results with us here. As a result, we learn too.
Koliva 2011-03-17 11:48:44

08.05.2020 15:10	# 2
Guests
My teacher, I know you from another club ... welcome to you first ... you know the forum rules. you must introduce yourself in a detailed way, right? :)))

08.05.2020 15:10	# 6
koliva
Hello there. Perhaps you have tried this far enough so far. Let me tell you a few things, maybe a hint comes out of the line. Does any malfunction light come on when your vehicle stops? Oneri do: 1. Check if the EGR valve is obstructed. The obstructed EGR valve causes the local vacuum to leak and your vehicle will stop idling. In your vehicle, the EGR valve is on the right rear of the engine. Follow the silver colored pipe coming out of the intake manifold and it is connected to a part at the back. This connected part is EGR. It is a little difficult to access, but it can be done when you try. Holds 2 8 mm bolts. Maybe there is an extra clamp for the cables. Try to blow it out. You can clean it with pads or debris sprays. Also check that the valve is on the axis of the shaft inside. The part you are looking for is in the picture below: 2. This is what I usually call the malfunction light. If it is burning, it is useful to test it. There are 2 sensors. One is the camshaft sensor and the other is the crankshaft sensor. It is a good idea to replace both of them. If you can at least test it, have it tested. These are what I will say. I hope that will be useful.

08.05.2020 15:10	# 8
Guests
what is the fault of the machine when you go to the service for the malfunction heat ????????

08.05.2020 15:10	# 10
Guests
it didn't happen: ((( If the fault light is on, it is necessary to know the reason. anyway it gives error ??? I don't think it will do my fuel mixture in gasoline. I will say this is because of the big chance lpg. But if there is another problem, it can do so. you say you are already doing ... your friends in Ankara will tell you a master or a service who knows the heat ...

08.05.2020 15:10	# 11
koliva
If the engine malfunction light is on, the water is called to the sounds I call. At least you're sure. Healthier comments can be made if you get the errors they see when they connect your car to the computer, or better still the error codes. Regardless, we would be very happy if you share the results with us here. As a result, we learn too. Koliva 2011-03-17 11:48:44

	406 idling and stopping problem
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 406

08.05.2020 15:10	# 1
taskinbudakk
I HAVE SLM 2001 MODEL 406 SV BVA GASOLINE + LPG CAR .. I HAVE I HAVE A BRC LPG KIT AT 78000KM ... I CAN'T FIND A SOLUTION TO THESE .. I WAIT FOR YOUR AID .. MY VEHICLE IS AT 86000KM NOW ...