406 engine shake

The 2000 model d9 406 st 2.0 vehicle has normal (in neutral gear) engine winding, I took the service and I do not fire the injectors, they changed the coil, the problem continued and the top cover was tried to be repaired, but my problem continues. After these works, the performance of the vehicle decreased

Usually the rocking is caused by the ears of the motor, that is, the motor connection points to the chassis, but I know that it only shakes. So, is there a problem with idling? So just the problem is shaking or idling? What performance losses have you observed?

[QUOTE = Koliva]
Usually the rocking is caused by the ears of the motor, that is, the motor connection points to the chassis, but I know that it only shakes. So, is there a problem with idling? So just the problem is shaking or idling? What performance losses have you observed?
[/ QUOTE] It happened in my car too, but there was a problem with the engine's ears and it got better.

yes there is a problem in idling, it runs erratically and there is no problem in the motor ears

Go to a good engine mechanic can be engine ears

[QUOTE = sdts] yes there is a problem with idling, it is working irregularly and also there is no problem with motor ears

[/ QUOTE]

It is necessary to reduce the problem or it may cause something wrong.
The first thing that comes to mind when the engine is said to be swinging is the motor ears, but what kind of swing? It is the swing that comes to our mind as if it would come out of the swing. In other words, when you look at the hood and get on the throttle, the engine will squeeze a little. Look at the video, though it's a bit overdone here

[TUBE] rbxlcxfzsa4 [/ TUBE]

Best of you take a video to us in detail. Show how to shake it, let's make more accurate comments.

Usually it is made from the upper motor ear, but as far as I know, there are 4 ears. You'd better take it to a good mechanic.

KARDESIM YOU'RE PLAYING THIS ENGINE WITH SIZE IS NOT A MORE.