![]() ![]() |
|
![]() |
308 VTI CAM SHAFT FAULT PLEASE HELP |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013) |
08.05.2020 21:22 | # 1 |
![]() |
|
I bought a 308 1.6 vti vehicle, the mptor lamp of the vehicle is on and it gives the camshaft malfunction on the computer The next day, I took it to the master, we removed the solenoid valve on the side of the engine, cleaned it with lining spray and wiped the fault, the vehicle was fixed, the old owner checked the coil and the spark plugs, the new maintenance, etc. All of them had it made in the newly installed jumper, it was really new, but the vehicle was working late sometimes, it seemed to have recovered after cleaning the valve only in the first morning. it seemed to work a little late, I made a close road about 100 km, I got on 2 days, then gen3 worked like a little late b3ndr stopped and restarted bikez immediately worked about 700 m went to the vehicle again turned on the malfunction lamp on the screen wrote info antipollution on the screen, the problem of this vehicle can be corrected if i change the valve or should the mptor be opened and change to Egzantirk? chain sound etc. no vehicle in my vehicle 2008 MODEL lpg or something else 139 thousand more. Who is the master who understands baktıxımım in Istanbul and if you can help me how he solved the problem, thank you. |
08.05.2020 21:22 | # 2 |
![]() |
|
today I removed the socket of the valve, the engine lamp went out, then put it back on, it went on again, it turned on again as if I removed the valve, the car was working like an open air filter even at idle, please help me. Failure ratings before first operation P0014 exhaust camshaft safing P11A8 exhaust camshaft regulation P11A3 valve timing exhaust camshaft adjustment error
|
08.05.2020 21:22 | # 3 |
![]() |
|
same problem happened in my car teacher, i ordered from aliex and melt the problem was solved it was very good in the part that came, i sold it 4 months after the problem. I think I would recommend you change both. will eliminate your problem. Unfortunately, cleaning is a temporary solution.
|
08.05.2020 21:22 | # 4 |
![]() |
|
which parts you call exactly what are their names, do you think there is a possibility in the exhaust shaft that will require the disassembly of the engine or is there any problem? I do not know your traction I think traction increases dueltincr
|
08.05.2020 21:22 | # 5 |
![]() |
|
https://www.parcagonder.com/elektrovana-ep6c-ep3c-orjınal,pr-154202.html There are two of these pieces, teacher, one in front and one in the back. I think there is no need to open the top cover of the engine, I think it will be fixed when you replace these parts. Normally it will show up in 10-15 days from aliexrest, but it may come a little late than the black Friday conversation. this part affects quite a lot of vehicle traction I had the same problem. |
08.05.2020 21:22 | # 6 |
![]() |
|
So I need to buy 2 of the same piece, if you throw the engine sound of the car, you will understand more or less, maybe you can help me, is there a chain sound, is it working properly or do I adjust the sentence?
|
08.05.2020 21:22 | # 7 |
![]() |
|
[QUOTE = eray112] So I need to buy 2 of the same piece, if you throw the engine sound of the car, you will understand more or less, maybe you can help me, is there a chain sound or is it working properly or do I adjust the sentence [/ QUOTE] it would be better to replace both. but it usually fails in the front. The sentence setting does not easily escape from these, but the chain should be very loose. of course it helps 05057893633 send my mobile number Let's look at the video hodja. and be on the vehicle petrol, make the lpg system passive.
|
08.05.2020 21:22 | # 8 |
![]() |
|
Guys, the problem has been solved. We adjusted the camshaft and changed the solenoid valves. Thank goodness there was no problem in the car. ![]() |
08.05.2020 21:22 | # 9 |
![]() |
|
get past it.
|
08.05.2020 21:22 | # 10 |
![]() |
|
thanks
|
08.05.2020 21:22 | # 11 |
![]() |
|
[QUOTE = eray112] Guys problem solved We adjusted the camshaft and moved the solenoid valves, thank goodness there is no problem in the car. ![]() Sa buddy I have a 207 gasoline vti automatic vehicle yesterday I left the service with the code P0014 hara. Where did you solve the problem? Did you tell me what I said, what is my video or audio recording?
|
07.08.2022 11:56 | # 12 |
![]() |
|
S.a brother, can you give your phone number, I have the same fault, we couldn't solve it.
|