Peugeot Forums - Peugeot Fan Club

308 Speed Stabilization and Limiting lever mounting

Homepage » PEUGEOT MODIFIED PLATFORM » 308
08.05.2020 18:09 # 1
ahmet_bjk

Hello friends...

There are 206, 206+, 207, 307 speed fixing topics in the forum and I said why not 308 and I opened this topic.

First of all, I bought a speed stabilization and limiting arm number 6242.Z8 from our friend Ali (Alicilik).

I put the handle I took in place. (I removed a plastic part on the cruise control handle or the cover under the steering was not closing). (Removing the plastic cover under the steering wheel was a bit of a mess because the key contact was too far out.)

Again, I installed the DiagBox program, which I bought from our friend Ali (Alicilik), and went to a master with a Peugeot computer connection cable. We could not introduce the arm with the master, our friend Ali (Alicilik) connected to my computer over the internet and activated the arm from the DiagBox program.

Then I went on a test drive and I am very happy to see that both limiting and cruise control work.

I would like to thank our friend Ali (Alicilik) for their help from here.

These are the pictures ...








Ahmet_bjk

ahmet_bjk 2013-12-28 12:08:23
08.05.2020 18:09 # 2
Serkan
First of all, use it good bye and congratulate Ali for his help.

But

(Only arms with speed stabilization feature (6242.Z9) do not adapt to 308s.)

I want to fix something here . The 308s only work on the 6242.Z9 arm, which is the limitation .
08.05.2020 18:09 # 3
ahmet_bjk

I wanted to call Şahinpeugeot and order an arm, he told me that only the arm with speed stabilization did not fit.

08.05.2020 18:09 # 4
Alicilik
Ahmet, sorry, I had an exam yesterday, I did not sleep tonight, I was able to sleep tonight. I had dinner and leaked.

I hope you will be satisfied using it.

You mentioned the luggage problem in the message. There may be a problem with the trunk lock. Otherwise, we did not find an intervention that would affect him.
08.05.2020 18:09 # 5
Serkan
[QUOTE = ahmet_bjk]

I wanted to call Şahinpeugeot and order an arm, he told me that only the arm with speed stabilization did not fit.

[/ QUOTE]
2010 Model 1.6 HDI 90 HP 308, we have been using for 2 years without any problems. I think Şahin peugeot looked at you from the system, it may seem limited in the system, but as I said, it works without limitation.
08.05.2020 18:09 # 6
ahmet_bjk
[QUOTE = Serkan] [QUOTE = ahmet_bjk]

I wanted to call Şahinpeugeot and order an arm, he told me that only the arm with speed stabilization did not fit.

[/ QUOTE]
2010 Model 1.6 HDI 90 HP 308, we have been using for 2 years without any problems. I think Şahin peugeot looked at you from the system, it may seem limited in the system, but as I said, it works without limitation. [/ QUOTE]

Then I am correcting the subject ...

08.05.2020 18:09 # 7
M.Eren
Hello friends

I also have the 2009 model 1.6 HDI 90 Hp 308. I want to have the cruise control / limiter lever installed. Will it be enough to insert the handle and introduce it via computer?

Does anyone know of service that can do this job in Istanbul? Where and how much money can I get the arm from?

greetings
Mustafa
08.05.2020 18:09 # 8
ercanayman
Hi
2008model 308 vti 1.6 will fit in the automatic car, how can I learn these arms?
08.05.2020 18:09 # 9
monalos
Alliance is doing this job in Ankara. You can talk to the person who makes a person in Istanbul.
08.05.2020 18:09 # 10
ercanayman
WHO MAY HELP IN ISTANBUL.
08.05.2020 18:09 # 11
monalos
You can ask the buyer or do pejo services at the press of the site.
08.05.2020 18:09 # 12
EYESMAN
Is there anyone in Kayseri who can do this job? I would be glad if anyone with the information can share ...
08.05.2020 18:09 # 13
EYESMAN
Good evening . I had my 308 vehicle fastened at the weekend. In the first place, the master could not activate the arm in any way. I think the system stopped giving errors. Then the arm chose the section belonging to the citroen c4 vehicle and put it in the VAR position. Then he chose 308 vehicles again and did something. Meanwhile, he made the cable unplugged from the computer several times. Finally, we activated the system from both the brain and the engine, he said. We went to the test and then I used it in my long way trial. There was no problem, but I was confused to introduce the handle first on the C4 vehicle. If you have information, I would be glad if you can share it.
08.05.2020 18:09 # 14
Alicilik
What did he not know from 308? It is interesting that it can open from C4 but not from 308.

Fixing + limiting should work smoothly.

If I don't think it will be a problem, it will burn the malfunction light already or fix it.
08.05.2020 18:09 # 15
EYESMAN
The system has chosen 308 vehicles. Then he introduced it from C4 and chose 308 vehicles again and made a few adjustments again. He looked at the bottom of the accelerator pedal first and said that since the sensor is not a part, the speed limit will not work, we can set up the speed stabilization. Currently only cruise control is active. EYES man 2015-04-27 15:42:23
08.05.2020 18:09 # 16
Alicilik
If he said he couldn't do it from 308 and there would be no limit, do not go there again.
08.05.2020 18:09 # 17
termit
Hi
I joined the forum from the forum I have 1 week 2010 308 1.6 VTI Comfort. I bought the vehicle for my wife, but when I used it in the evening, it was a really enjoyable vehicle. Is there a place where I can get the cruise control and attach it to the bursa?
08.05.2020 18:09 # 18
Izmir87
Hello friends,
Does it fit when we pick up the lever with z9 code or other codes that only operate cruise control? I'm confused about this, frankly
08.05.2020 18:09 # 19
Alicilik
I cannot help other provinces outside Ankara. If you are on the way to Ankara, I always wait

The arm's infrastructure is incompatible with the arm.
08.05.2020 18:09 # 20
Izmir87
I understand, my friend. I wish I had lived in Ankara. Can we find a friend who can help from Izmir?
Page : / 3
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”