308 speed control lever - 308 (2008-2013)

friends, I wish you all good work.

Is there anyone who applies the speed control lever for 308 diesel automatic vehicles.

Thank you from now.

Kivanc evening dresses and ahmete we will help.

Even if it can be attached to 206, it must be done in 308e. If you take the handle and open it from the system, I think it will work. But there are friends who have made it in the forum

[QUOTE = Appealing] They will be helped by applying to Kivanc evening dresses and ahmet. [/ QUOTE]

My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving.

[QUOTE = kivanc] [QUOTE = Buying] Kivanc will help you apply to evening dresses and ahmet. [/ QUOTE]

My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving.

[/ QUOTE]
Didn't you take it? Big smile

Come on, limit your arm. if there are ali, friends will work .. so far 206, 206+, 307, 308 have been tried and worked ..

[QUOTE = barishrocker] [QUOTE = kivanc] [QUOTE = Buyer] Kivanc will be helpful to evening dresses and ahmet. [/ QUOTE]

My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving.

[/ QUOTE]
Didn't you take it? Big smile

Come on, limit your arm. if there are ali, friends will work .. so far 206, 206+, 307, 308 have been tried and worked ..
[/ QUOTE]

They got into sleep sleep at 7 in the morning :) but I'm really glad.

[QUOTE = kivanc] [QUOTE = barishrocker] [QUOTE = kivanc] [QUOTE = Buying] They will be used to help kivanc evening dresses and ahmet. [/ QUOTE]

My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving.

[/ QUOTE]
Didn't you take it? Big smile

Come on, limit your arm. if there are ali, friends will work .. so far 206, 206+, 307, 308 have been tried and worked ..
[/ QUOTE]

They got into sleep sleep at 7 in the morning :) but I'm really glad.

[/ QUOTE]

I woke up at 3 am on Saturday, I slept at 7 am on Monday, I remember vaguely what I was doing in the meantime: D I woke up at 8am on Monday evening, I slept for another 12 hours after eating 3-4 hours: D

But the only vehicle I haven't made is the car of Ramazan. I expanded the fleet.

206-307sw-308: D

Kanaç brother without trouble: D If Barış takes the arm, Barış Abiye.

In the meantime, I would like to thank my grandfather for the cargo, but these two have been free.

thanks to ali, no more money between us. your place comes and your labor passes to me so it passes;) it is not that it is good on the way back, we did not sleep and we did not have an accident. Big smile

[QUOTE = barishrocker] thank you ali or us, money is not anymore. your place comes and your labor passes to me so it passes;) it is not that it is good on the way back, we did not sleep and we did not have an accident. Big smile

[/ QUOTE]

Well, I can not deny that I saw nirvana a couple of times after work was finished all day and Saturday on Sunday: D

I am going to do a lot more Aurise dowry with you, you know: D

Oh yeah right. Let me rust as you catch nice product;)

[QUOTE = Appealing] They will be helped by applying to Kivanc evening dresses and ahmet. [/ QUOTE]

Yes, the manual gear was applied to the 2009 model 308 1.6 HDI and worked. Thanks again to Ali ...

Thank you for your reply.

As far as I understand, if I take the arm, the rest is easy and simple.

I have friends in the industry and they have control devices.

I am glad if it can be activated with these devices. I should get it to work as soon as possible.

[QUOTE = faha] Thank you for your reply.

As far as I understand, if I take the arm, the rest is easy and simple.

I have friends in the industry and they have control devices.

I am glad if it can be activated with these devices. I should get it to work as soon as possible.

[/ QUOTE]

PP2000 or diagbox is required only.

08.05.2020 18:16	# 2
Alicilik
Kivanc evening dresses and ahmete we will help.

08.05.2020 18:16	# 5
barishrocker
[QUOTE = kivanc] [QUOTE = Buying] Kivanc will help you apply to evening dresses and ahmet. [/ QUOTE] My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving. [/ QUOTE] Didn't you take it? Come on, limit your arm. if there are ali, friends will work .. so far 206, 206+, 307, 308 have been tried and worked ..

08.05.2020 18:16	# 6
kivanc
[QUOTE = barishrocker] [QUOTE = kivanc] [QUOTE = Buyer] Kivanc will be helpful to evening dresses and ahmet. [/ QUOTE] My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving. [/ QUOTE] Didn't you take it? Come on, limit your arm. if there are ali, friends will work .. so far 206, 206+, 307, 308 have been tried and worked .. [/ QUOTE] They got into sleep sleep at 7 in the morning :) but I'm really glad.

08.05.2020 18:16	# 7
Alicilik
[QUOTE = kivanc] [QUOTE = barishrocker] [QUOTE = kivanc] [QUOTE = Buying] They will be used to help kivanc evening dresses and ahmet. [/ QUOTE] My car is automatic diesel. Thanks to my brother Ali is working very well now fixing and limiting. My brother, again, in his hand, in his arm. I did a long way, noticed a lot in fuel and driving. [/ QUOTE] Didn't you take it? Come on, limit your arm. if there are ali, friends will work .. so far 206, 206+, 307, 308 have been tried and worked .. [/ QUOTE] They got into sleep sleep at 7 in the morning :) but I'm really glad. [/ QUOTE] I woke up at 3 am on Saturday, I slept at 7 am on Monday, I remember vaguely what I was doing in the meantime: D I woke up at 8am on Monday evening, I slept for another 12 hours after eating 3-4 hours: D But the only vehicle I haven't made is the car of Ramazan. I expanded the fleet. 206-307sw-308: D Kanaç brother without trouble: D If Barış takes the arm, Barış Abiye. In the meantime, I would like to thank my grandfather for the cargo, but these two have been free.

08.05.2020 18:16	# 9
Alicilik
[QUOTE = barishrocker] thank you ali or us, money is not anymore. your place comes and your labor passes to me so it passes;) it is not that it is good on the way back, we did not sleep and we did not have an accident. [/ QUOTE] Well, I can not deny that I saw nirvana a couple of times after work was finished all day and Saturday on Sunday: D I am going to do a lot more Aurise dowry with you, you know: D

	308 speed control lever
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013)

08.05.2020 18:16	# 1
faha
friends, I wish you all good work. Is there anyone who applies the speed control lever for 308 diesel automatic vehicles. Thank you from now.

08.05.2020 18:16	# 3
kursat3006
Even if it can be attached to 206, it must be done in 308e. If you take the handle and open it from the system, I think it will work. But there are friends who have made it in the forum

08.05.2020 18:16	# 10
barishrocker
Oh yeah right. Let me rust as you catch nice product;)

08.05.2020 18:16	# 11
ahmet_bjk
[QUOTE = Appealing] They will be helped by applying to Kivanc evening dresses and ahmet. [/ QUOTE] Yes, the manual gear was applied to the 2009 model 308 1.6 HDI and worked. Thanks again to Ali ...

08.05.2020 18:16	# 12
faha
Thank you for your reply. As far as I understand, if I take the arm, the rest is easy and simple. I have friends in the industry and they have control devices. I am glad if it can be activated with these devices. I should get it to work as soon as possible.

08.05.2020 18:16	# 13
Alicilik
[QUOTE = faha] Thank you for your reply. As far as I understand, if I take the arm, the rest is easy and simple. I have friends in the industry and they have control devices. I am glad if it can be activated with these devices. I should get it to work as soon as possible. [/ QUOTE] PP2000 or diagbox is required only.