![]() ![]() |
|
![]() |
308 GASOLINE LIGHT AND GEAR |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013) |
08.05.2020 19:45 | # 1 |
![]() |
|
SUBJECT: When the gas light shines with the gear, it protects the gear and moves 2-3 (LIMP HOME MODE) FILLED WHEN GASOLINE TAKE UP TIMELY BUT IT DOES NOT MAKE THIS ERROR LPG ZAVOLİ ANY FAILURE ON THE SCREEN IS NOT FLASHING IN THE LIGHT STANDARD TUBE FAILURES WHEN FAULT LIGHT LOW MIX HIGH MIX HIGH SENSOR CHARGER LOW SENSOR CHARGER SOME BETWEEN BACK OXYGEN PROBLEM FAILURE |
08.05.2020 19:45 | # 2 |
![]() |
|
d there may be dirt at the bottom of the epo, this dirt may be blocking gasoline injectors, the tank is brewed, the gasoline injector cleaner additive is put in half tank and the vehicle can be compressed a bit, maybe it will be a solution, a cheap method ..
|
08.05.2020 19:45 | # 3 |
![]() |
|
There is more than half the petrol in the tank, as the lpg system is moving, the needle falls as it moves, a different error since the light comes on does not mean gasoline runs out or the bottom of the tank
|
08.05.2020 19:45 | # 4 |
![]() |
|
First of all, if the situation is related to petrol light, there are psa modules, so if the light of 150-200 TL is not lit so that the gasoline needle does not fall, I think you should not try such a problem.
|
08.05.2020 19:45 | # 5 |
![]() |
|
teacher, we need to solve the problem, we just cover it with psa
|
08.05.2020 19:45 | # 6 |
![]() |
|
Problem solved O2sensor bank 1 sensor 2 malfunction ... As the cable cable malfunction goes and goes, I detected myself with the obd device and ordered a new one ... The task of the sensor 2 is to protect the fuel in the light of the sensor with this sensor malfunction. I fixed the old sensor cable and I fixed it, but I need to install a new one ... This problem will definitely happen to everyone.
|