308 foot lighting application.

friends, this feature, which is available in premium or electrical package options of 308s, I asked myself why I don't have it, and then I found the solution and applied it. At least it is not in my car, but we were able to actively use this system as we installed the lamps in some of my friends' cars. It was a little more difficult. I thought the easiest way was to draw a line from the ceiling lamp and I started to work. Yes, I even took pictures and video :) I have a short summary of the process, I took a parallel line from the ceiling lamp and extended it to the fuse box, then I used a second cable from the back of the pedals. With the help of the wire, we extended the cable to the passenger section. I thought I would complete the job with a single riser because I used computer neon, but I wanted to secure the job with 2 risers. The bottom of the glove box is flat and long enough to stick the neon, and on the left side, the job was a bit confused. I tried to put the neon bulb in front of the fuse box longitudinally, but I tried to put a cross or something other than this, but it was impossible to fix it in this case. I immediately corrected the situation with the neon I used, but I don't have light in my trunk right now, I think I will take a strip led and install a led. Or I have a blue neon um. a small green socket. Without forgetting, the foot part flashes intermittently just like the ceiling lamps.

Nice work. I think the lamps work parallel to the doors?

Very Good Application Especially I think it is a very ingenious idea to blink with the central lock ...
You have done good work with your hands ...

It works with the door lock system because it is connected to the ceiling lamps, now another project in my mind has woke up, there is a companion light in my car but no welcome light :) I wonder how I would power these roof lamps daytime running lights, but this time I try only for the front side in each application. I need to draw a separate line for the light bulb, there will be no room in the channels soon. If I can activate the headlight sensor literally, it will be super. I will do a little research tomorrow and try to learn about a product of bosch car which has both headlight and rain sensor, a definite positive answer. If I buy it, I plan to remove the existing sensor and replace it.

I have done a little two more touches today, I also installed a led bulb in the lighting section of the ceiling, I also installed strip led in the trunk. mimitt2011-09-19 21:54:28

I also plan to lay strips on both sides of the trunk and lay led on the forefoot section. & Nbsp; Did you use the loader for neon?

For me, my led project for the base has been ready in my head for a very long time. I will use the 2 modules & nbsp; SMD 3528 on led modules used by advertisers. I made a cable down from ten lamps. But I have to get it off the tail lamp. I hope I will do it at a convenient time ...

yes for the riser neon. already comes out of the box,