![]() ![]() |
|
![]() |
308 ANTIPOLLUTION IS FAULT !!! |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013) |
08.05.2020 21:31 | # 1 |
![]() |
|
My car 2008 model 1.6 VTI automatic 308. Dec. I own the 130,000 km and 1 year. With the ANTIPOLLUTION FAULT error that started in my vehicle, I have been dealing for 7-8 months and I am sick and now I have even started to decide to sell the vehicle. Search. Nothing is normal, but when I go into parking or heavy traffic in Istanbul, the engine starts to vibrate as if it would be displaced, it warns and falls out of power. As if 2 pistons are working car. The fan starts working and starts to shout when you press the gas unnecessarily. It gets better from night to night and sometimes even when going on the road. The engine brain has changed, the rings have changed, the thrusters have changed, the coil has changed, the spark plugs have changed, and it has been observed that it runs smoothly even when the injector is installed and tested on another vehicle. We do it with the master I know and trust, but the man is fed up and we can not figure out what it is. The last engine was disconnected, the last resort is to make it, and if it continues, I will sell the vehicle. If there are friends who can solve and solve this problem, please help. I would like to thank the friends who have helped in advance. Now it is the kind that will make you feel confused by thinking. I can send the video available in friends who can help. Thank you in advance I wish you a healthy day.
|
08.05.2020 21:31 | # 2 |
![]() |
|
So what are the error codes that the vehicle gives when my teacher gives this error. Does the vehicle have LPG? and the catalyst was checked.
|
08.05.2020 21:31 | # 3 |
![]() |
|
There is no LPG in the vehicle. There is no dirt etc in the catalyst and they were checked. I do not know the error code of the vehicle for the moment, it was just ignition error, sometimes the 2nd piston, sometimes the 4th piston, sometimes the 3rd piston was constantly traveling. On top of that, the coils and spark plugs have changed.
|
08.05.2020 21:31 | # 4 |
![]() |
|
You are in vain for your money. When you get this error, there is a situation like stopping in the vehicle.
|
08.05.2020 21:31 | # 5 |
![]() |
|
Let me say that the engine is not as if it is stopping, as if the 2 pistons are running. As a warning, only antipollution faults and fans run, regardless of whether the engine is cold. I have the video in my hand, it will be clearer that I will try to upload it here.
|
08.05.2020 21:31 | # 6 |
![]() |
|
This is exactly the problem I have here in the vehicle in the video. [TUBE] 35L7RBNM2rc [/ TUBE] [QUOTE = luna2308] Let me say that the engine is as if the two pistons are running, not like stopping. As a warning, only antipollution faults and fans run, regardless of whether the engine is cold. I have the video in my hand, it will be clearer that I will try to upload it here. [/ QUOTE]
|
08.05.2020 21:31 | # 7 |
![]() |
|
Make an appointment with the service, take the vehicle to the service
|
08.05.2020 21:31 | # 8 |
![]() |
|
I took them to the service before they could not solve them. When the services start working, I will try another service again. Can't say that a clear solution to the problem is no one for now
|
18.05.2020 13:41 | # 9 |
![]() |
|
Hello again, first of all, good luck to all. They said, let's change the engine vanos and try it like this for the problem of my vehicle. When the vehicle is connected to the computer, it gives ignition error and mixing error in the 3rd cylinder. Do you think vanos will be useful when solenoids change?
|
18.05.2020 15:22 | # 10 |
![]() |
|
What has to do with the operation of the vehicle is that the solenoids of you replace the catalyst upper oxygen and lower oxygen sensors, namely lambda sensors. They adjust the working system of the vehicle. I can not guarantee the original spare parts for the spare parts.
|
30.06.2020 12:17 | # 11 |
![]() |
|
When you open the bonnet, there is a metal pipe like a little finger attached to the turbo just in front of the radiator. Check it, if it is not fixed with your hand, it goes back and forth. Because it is loose, it gives a warning if it gets air from there .. It can be done by removing the front bumper and welding ... I made it by my own means, I wrapped a nylon rope on the end of the pipe, put it into place and tightened its screw, it did not give a warning ... Necdet2020-06-30 12: 25:45
|
08.04.2023 12:08 | # 12 |
![]() |
|
Hello, I'm reviving the topic, but I wonder if the problem is solved?
|