![]() ![]() |
|
![]() |
308 antipoliton fault |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013) |
08.05.2020 21:18 | # 1 |
![]() |
|
I am a 1 week 2008 pejo 308 user, diesel nothing happened in the automatic vehicle 3 days ago, the antipolition fault warning came, I showed it to izmir friends in the industry, they put it in the device, they deleted the error code, but it came out yesterday, they took it again, they looked again, but they couldn't find anything, there are too many of these complaints but there is no definite solution. I think if they have friends who have recently come across this warning, can they help me? |
08.05.2020 21:18 | # 2 |
![]() |
|
[QUOTE = gkt35] hi friends first of all i congratulate everyone's sacrifice feast I am a 1 week 2008 pejo 308 user, diesel nothing happened in the automatic vehicle 3 days ago, the antipolition fault warning came, I showed it to izmir friends in the industry, they put it in the device, they deleted the error code, but it came out yesterday, they took it again, they looked again, but they couldn't find anything, there are too many of these complaints but there is no definite solution. I think if they have friends who have recently come across this warning, can they help me? [/ QUOTE] what does it say in the fault code?
|
08.05.2020 21:18 | # 3 |
![]() |
|
Hello. My vehicle was 2008 model 1.6 vti. It has antipolition error 3 times in the last 1 year. After making a mistake on the road, he suddenly loses power and does not receive veterans. First the spark plugs have changed, then the coils have changed, but again it gave the same error. But this problem started to be constantly. Do you have any solution, you know?
|
08.05.2020 21:18 | # 4 |
![]() |
|
hello, this problem is a pollution error. There are many reasons. There are many reasons, from the quality of the gasoline you buy to the ignition system and the exhaust system. First of all, you need to have your car checked the fault code with the original OBD device. It becomes clear where the error is given. I have heard that some OBD devices do not give full fault code because they do not detect full brand model and year. If you find someone who leaves the peugeot, citroen service in your province (now it has opened itself to work) He finds you a point shot problem.
|
08.05.2020 21:18 | # 5 |
![]() |
|
I guess the error code is 1336 1340 but the coil spark plug etc. Changed still deteriorates once a month
|
08.05.2020 21:18 | # 6 |
![]() |
|
error codes you provided; P1336: intermittent malfunction, excessive combustion disorder in uncertain cylinders P1340: continuous fault, excessive combustion disorder in cylinder 4 Accordingly, you replaced the coils and spark plugs. If there is no condition such as wetting the coils, it may create a short circuit. So you can see this malfunction. Or as this breakdown Crankshaft position sensor malfunction written. According to the values given by this sensor, the ECU allows fuel firing. Maybe there is a problem with this sensor. I would also take a look at this. If it's cheap, you can change it. In addition, in an article, in this sensor malfunction, the vehicle does not exceed a certain speed. Ecu says he only allows it. |
08.05.2020 21:18 | # 7 |
![]() |
|
Thank you very much for your interest
|
22.06.2021 11:10 | # 8 |
![]() |
|
Hello, I just joined you. I have a 2008 model 1.6 VTI. Yesterday, while cruising on a long road, suddenly P1336: intermittent failure, uncertain cylinders excessive burn in distorted P1340: constant failure, excessive cylinder 4 burn-in < span ="highlight">defectsas well as failures of cylinders 1,2,3. I changed the spark plugs and coils because there was a problem with ignition. But he repeated the error. It's very annoying, what should I do? Can you help me? Is there a Peugeot master you would recommend in Ankara?
|
22.06.2021 11:11 | # 9 |
![]() |
|
|
24.06.2021 03:20 | # 10 |
![]() |
|
Hello, I just joined you because of the same problems. My car 1.6 vti 308 2008 model gave a constant dirty fuel a couple of months ago Then it started to vibrate when I tried not to eat gas and noise from the left wheel. div> At the end, it didn't work. They told the industry that the engine was finished and it should be replaced, with a tow truck. It costs 22 thousand liras... we don't know if it's true, of course
|
15.07.2021 18:46 | # 11 |
![]() |
|
I have a 2008 model 308 1.6 HDI I had this problem for 2 years, it goes out for a while, then it burns I started to buy the diesel from the shell, it went out on its own, I recommend you to use it with a cycle. I recommend you to use it with a cycle, I say don't go to the industry immediately, the masters are looking forward to the exhaust system. lots of money
|
15.07.2021 18:47 | # 12 |
![]() |
|
quality fuel, speed, use is deleted |
13.03.2022 09:29 | # 13 |
![]() |
|
Hello, I have a 2008 model 1.6 vti gasoline vehicle (no LPG) Engine fault lamp does not always light, when it lights up, it gives an antipollution faulty warning. 2. I feel a little misfire at the low speed of the gear
I didn't want to open a topic again so that there would be no duplication I learned the obdden fault codes when it gave the error. P0011 P1017 P2178 P1031 P1062 Dear opinion and I request your help. |
14.03.2022 10:39 | # 14 |
![]() |
|
Hi, sir, first of all, what you need to do is do not use oil other than 5w/30 in your vehicle. There are two solenoid valves at the front of the engine, it is called eccentric lubricant, remove it and clean it well. with batala spray. Most of the error codes seem to be an issue with the air intake part. One of these may cause the other to malfunction. Have you ever had spark plugs and coils changed in your vehicle? Can you take a look at the history of the coils on the vehicle and when was the last time the fuel filter was changed?
|
14.03.2022 21:42 | # 15 |
![]() |
|
Hello Mr. Soner, I just bought the vehicle, it has 3.000 km for oil maintenance I have not had the coil and spark plugs checked at all Is there a place you can recommend other than the authorized service in Ankara?
|